What is the 7Design Rear Wing for LB634 Lamborghini Temerario made from?

The ARIA Rear Wing for LB634 Lamborghini Temerario is carbon fiber throughout, blade and stands alike, laid up against tooling made by 7Design and built in the USA. Twill carbon is the standard finish, with forged carbon and tinted twill carbon offered as paid options. All three share the same structural layup, so the finish is chosen on surface character.

Does the ARIA rear wing need the vented spoiler as well?

Yes. 7Design mounts the rear wing to the ARIA Vented Spoiler rather than directly to the Temerario rear deck, so the two parts are ordered together. The spoiler is listed separately on Bulletproof Automotive, and both are included in the complete ARIA body kit.

How much downforce does the wing add?

7Design has published no downforce figure for the ARIA wing on the Temerario, so no number is quoted here. The blade profile was developed in computational fluid dynamics to add load over the rear axle while keeping the rear of the car visually clean, and the firm describes the intent as real aerodynamic results rather than styling.

Why do the wing stands have cut-outs?

The cut-outs remove material where the structural loads allow it, so the stands weigh less than a solid plate would, and the shape left behind is the ARIA signature that runs through the rest of the program. It is a functional decision that 7Design chose to make visible rather than hide.

How difficult is installation?

The wing itself bolts to the ARIA Vented Spoiler, so the work depends on whether that spoiler is already fitted. Fitting both together is a job for a shop that handles carbon aero on exotics, since the spoiler sets the height and angle of the wing and any error there shows from every angle. Hardware and final alignment sit with the installing shop.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

7Design ARIA Carbon Fiber Rear Wing for LB634 Lamborghini Temerario

7Design’s ARIA Carbon Fiber Rear Wing for LB634 Lamborghini increases rear downforce without spoiling the clean rear stance that makes the Temerario look fast standing still. The wing is built from carbon fiber throughout, and its stands carry precision cut-outs that take weight out while creating the ARIA signature, a detail that turns a structural bracket into part of the design. Laid up against 7Design’s own tooling in the USA, in twill, forged or tinted finish. It mounts to the ARIA Vented Spoiler and is ordered alongside it, which is how the firm intended the rear of this car to be finished.

Construction

The wing is carbon fiber throughout, blade and stands alike, laid up against 7Design’s own tooling and built in the USA. The stands are where the firm shows its hand: rather than a plain plate, each carries precision cut-outs that remove material where the loads allow and leave the ARIA signature shape behind, so the part that exists to hold the blade up also does design work. The blade profile was developed to add load over the rear axle while keeping the rear of the car visually clean, which is the harder brief and the reason the wing sits as low as it does. Mounted, the ARIA Rear Wing for LB634 Lamborghini Temerario reads as intent rather than ornament.

Features

Carbon fiber blade and stands throughout
Precision cut-out stands that shed weight and carry the ARIA signature
Adds rear downforce while keeping the rear stance visually clean
Lightweight layup over 7Design’s own tooling
Twill carbon standard, with forged carbon and tinted twill carbon optional
Built in the USA

Applications

Lamborghini Temerario: LB634 | 2025-present | 4.0L Twin-Turbo V8 Hybrid

Notes

Sold individually
Requires the ARIA Vented Spoiler. 7Design mounts this wing to the lower spoiler, so the ARIA Carbon Fiber Vented Spoiler is ordered alongside it.
Offered in twill carbon fiber as standard, with forged carbon and tinted twill carbon available as options (both priced above the standard twill finish)
Each ARIA component is laid up to order in the USA, so it is listed on backorder and the team confirms build time at the point of order
Developed in computational fluid dynamics and fitted to the factory mounting points, with no bodywork modification required
The ARIA Rear Wing for LB634 Lamborghini Temerario is one of eighteen pieces in the program; the complete kit is the 7Design ARIA Carbon Fiber Body Kit

Frequently Asked Questions

What is the 7Design Rear Wing for LB634 Lamborghini Temerario made from? The ARIA Rear Wing for LB634 Lamborghini Temerario is carbon fiber throughout, blade and stands alike, laid up against tooling made by 7Design and built in the USA. Twill carbon is the standard finish, with forged carbon and tinted twill carbon offered as paid options. All three share the same structural layup, so the finish is chosen on surface character.
Does the ARIA rear wing need the vented spoiler as well? Yes. 7Design mounts the rear wing to the ARIA Vented Spoiler rather than directly to the Temerario rear deck, so the two parts are ordered together. The spoiler is listed separately on Bulletproof Automotive, and both are included in the complete ARIA body kit.
How much downforce does the wing add? 7Design has published no downforce figure for the ARIA wing on the Temerario, so no number is quoted here. The blade profile was developed in computational fluid dynamics to add load over the rear axle while keeping the rear of the car visually clean, and the firm describes the intent as real aerodynamic results rather than styling.
Why do the wing stands have cut-outs? The cut-outs remove material where the structural loads allow it, so the stands weigh less than a solid plate would, and the shape left behind is the ARIA signature that runs through the rest of the program. It is a functional decision that 7Design chose to make visible rather than hide.
How difficult is installation? The wing itself bolts to the ARIA Vented Spoiler, so the work depends on whether that spoiler is already fitted. Fitting both together is a job for a shop that handles carbon aero on exotics, since the spoiler sets the height and angle of the wing and any error there shows from every angle. Hardware and final alignment sit with the installing shop.

About 7Design

7Design is a design house based in New York that fuses carbon, art and performance for a short list of the world’s most desirable cars. Every ARIA component begins as a digital model refined over thousands of hours, with proportions, aerodynamic validation and panel integration settled before a mold is cut. Development runs in computational fluid dynamics, so the aero surfaces do measurable work rather than merely suggesting it, and every piece is built in the USA from the finest carbon fiber the firm can source. Twill, forged and tinted carbon are offered across the range, each treated as a considered choice rather than an afterthought.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.