What are the 7Design Side Skirts for LB634 Lamborghini Temerario made from?

The ARIA Side Skirts for LB634 Lamborghini Temerario are laid up from pre-preg carbon fiber against tooling made by 7Design and built in the USA. Twill carbon is the standard finish, with forged carbon and tinted twill carbon offered as paid options. All three share the same structural layup, so the finish is chosen on surface character.

Are the side skirts sold as a pair?

Yes. They are supplied as a set covering both sides of the vehicle, since the skirts are handed and only work as a matched pair down the left and right sills. One order covers the complete installation rather than a single side.

Do the ARIA skirts replace the factory sill covers or fit over them?

They locate on the Temerario factory sill mounting points and need no cutting or drilling. 7Design has not published a factory part number the skirts supersede, so no such claim is made here; the installing shop should confirm what is removed on a specific car before work begins.

Are the fins functional?

They do real work. The fins keep air attached along the flank and guide it toward the rear of the car, and 7Design developed the ARIA aerodynamic surfaces in computational fluid dynamics rather than styling them in isolation. The visual effect of a longer, lower profile follows from that shaping rather than replacing it.

How difficult is installation?

Level-2 install difficulty. The skirts locate on the existing Temerario sill mounting points and need no cutting, though getting both sides even along a long carbon panel is work for a shop that fits aero on exotics regularly. Hardware, finishing and final alignment sit with the installing shop rather than shipping preset.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

7Design ARIA Carbon Fiber Side Skirts for LB634 Lamborghini Temerario

7Design’s ARIA Carbon Fiber Side Skirts for LB634 Lamborghini take their inspiration from the hydrodynamic forms of oceanic predators, and the resemblance is not merely a line in a brochure: sculpted carbon fins rise out of the surface to guide air along the Temerario’s flanks. They lengthen the car’s profile and settle it visually closer to the road while staying inside Lamborghini’s own design language rather than shouting over it. Pre-preg carbon laid against 7Design’s tooling and built in the USA, in twill, forged or tinted finish. They are the change that makes a standard Temerario look tall afterwards.

Design and Performance

The skirts run the length of the sill and carry a set of sculpted fins that emerge from the surface rather than being applied to it, a detail drawn from the hydrodynamic forms of oceanic predators and one that gives the flank a direction the factory sill does not have. Functionally the fins guide air along the body and keep it attached down the side of the car toward the rear diffuser; visually they stretch the profile and drop the apparent ride height, which is why the skirts are so often the second piece an owner orders after the front splitter. Fitted as a pair, the ARIA Side Skirts for LB634 Lamborghini Temerario are the change that makes a standard car look tall by comparison.

Features

Sculpted fins emerge from the skirt surface rather than being applied to it
Guides air along the flank toward the rear of the car
Lengthens the profile and lowers the apparent ride height
Lightweight pre-preg carbon fiber laid over 7Design’s own tooling
Locates on the factory sill mounting points with no bodywork modification required
Twill carbon standard, with forged carbon and tinted twill carbon optional
Built in the USA

Applications

Lamborghini Temerario: LB634 | 2025-present | 4.0L Twin-Turbo V8 Hybrid

Notes

Sold as a set covering both sides of the vehicle
Offered in twill carbon fiber as standard, with forged carbon and tinted twill carbon available as options (both priced above the standard twill finish)
Each ARIA component is laid up to order in the USA, so it is listed on backorder and the team confirms build time at the point of order
Developed in computational fluid dynamics and fitted to the factory mounting points, with no bodywork modification required
The ARIA Side Skirts for LB634 Lamborghini Temerario are one of eighteen pieces in the program; the complete kit is the 7Design ARIA Carbon Fiber Body Kit, and the rest of the range is at the 7Design House brand page

Frequently Asked Questions

What are the 7Design Side Skirts for LB634 Lamborghini Temerario made from? The ARIA Side Skirts for LB634 Lamborghini Temerario are laid up from pre-preg carbon fiber against tooling made by 7Design and built in the USA. Twill carbon is the standard finish, with forged carbon and tinted twill carbon offered as paid options. All three share the same structural layup, so the finish is chosen on surface character.
Are the side skirts sold as a pair? Yes. They are supplied as a set covering both sides of the vehicle, since the skirts are handed and only work as a matched pair down the left and right sills. One order covers the complete installation rather than a single side.
Do the ARIA skirts replace the factory sill covers or fit over them? They locate on the Temerario factory sill mounting points and need no cutting or drilling. 7Design has not published a factory part number the skirts supersede, so no such claim is made here; the installing shop should confirm what is removed on a specific car before work begins.
Are the fins functional? They do real work. The fins keep air attached along the flank and guide it toward the rear of the car, and 7Design developed the ARIA aerodynamic surfaces in computational fluid dynamics rather than styling them in isolation. The visual effect of a longer, lower profile follows from that shaping rather than replacing it.
How difficult is installation? Level-2 install difficulty. The skirts locate on the existing Temerario sill mounting points and need no cutting, though getting both sides even along a long carbon panel is work for a shop that fits aero on exotics regularly. Hardware, finishing and final alignment sit with the installing shop rather than shipping preset.

About 7Design

7Design is a design house based in New York that fuses carbon, art and performance for a short list of the world’s most desirable cars. Every ARIA component begins as a digital model refined over thousands of hours, with proportions, aerodynamic validation and panel integration settled before a mold is cut. Development runs in computational fluid dynamics, so the aero surfaces do measurable work rather than merely suggesting it, and every piece is built in the USA from the finest carbon fiber the firm can source. Twill, forged and tinted carbon are offered across the range, each treated as a considered choice rather than an afterthought.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.