What is the 7Design Splitter for LB634 Lamborghini Temerario made from?

The ARIA Splitter for LB634 Lamborghini Temerario is laid up from pre-preg carbon fiber against tooling made by 7Design and built in the USA. Twill carbon is the standard finish, and forged carbon and tinted twill carbon are offered as paid options. All three share the same structural layup, so the finish is chosen on surface character.

Does the ARIA front splitter fit the standard Temerario bumper?

Yes. It is designed around the factory front bumper of the LB634 Temerario and locates on the existing mounting points, so no cutting or drilling is needed. It is not designed to layer over a front lip from another maker, so a Temerario already carrying aftermarket front aero should be confirmed with the team before ordering.

How much ground clearance does the splitter take away?

7Design has not published a ride height figure for the ARIA splitter, so no number is quoted here. It is a front splitter on a mid-engined supercar and extends the lowest point of the nose forward, so owners who regularly meet steep driveways should plan for the same care any Temerario front lip demands.

Is the splitter functional or cosmetic?

Both. The sculpted underside manages air at the leading edge, where the aerodynamic balance of a mid-engined car is set, and 7Design developed the ARIA aero surfaces in computational fluid dynamics rather than styling them alone. The visual effect of a lower, longer nose comes as a consequence of that work rather than instead of it.

How difficult is installation?

Level-2 install difficulty. The splitter locates on the existing Temerario mounting points and needs no cutting or drilling, though a shop used to fitting carbon aero on exotics will get the gaps and the lower edge alignment right first time. Hardware, finishing and final alignment sit with the installing shop.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

7Design ARIA Carbon Fiber Front Splitter for LB634 Lamborghini Temerario

7Design’s ARIA Carbon Fiber Front Splitter for LB634 Lamborghini extends the Temerario’s front architecture rather than bolting a shelf onto it, which is the whole difference between aero that flatters an exotic and aero that cheapens one. The form takes its cues from the sharp, predatory lines found in nature, and its sculpted surfaces manage airflow at the leading edge while holding the low stance the factory design language already implies. Pre-preg carbon over 7Design’s own tooling, built in the USA, in twill, forged or tinted finish. It is the first piece most Temerario owners add and the one their friends notice without being told.

Design and Performance

The splitter picks up the factory bumper’s lower edge and carries it forward and down, so the addition reads as an extension of the Temerario’s own architecture rather than an accessory fitted to it. Its sculpted underside works the air at the leading edge, where the car’s aerodynamic balance is decided, and 7Design developed those surfaces in computational fluid dynamics rather than styling them and hoping. The visual result is the one owners ask for most: a nose that sits closer to the road and looks like it was drawn that way. On the car, the ARIA Splitter for LB634 Lamborghini Temerario sets the tone that the rest of the program follows.

Features

Sculpted leading-edge form drawn from the factory bumper’s lower line
Airflow surfaces developed in computational fluid dynamics
Lowers the visual ride height at the nose without an add-on shelf look
Lightweight pre-preg carbon fiber laid over 7Design’s own tooling
Locates on the factory mounting points with no bodywork modification required
Twill carbon standard, with forged carbon and tinted twill carbon optional
Built in the USA

Applications

Lamborghini Temerario: LB634 | 2025-present | 4.0L Twin-Turbo V8 Hybrid

Notes

Sold individually
Offered in twill carbon fiber as standard, with forged carbon and tinted twill carbon available as options (both priced above the standard twill finish)
Each ARIA component is laid up to order in the USA, so it is listed on backorder and the team confirms build time at the point of order
Developed in computational fluid dynamics and fitted to the factory mounting points, with no bodywork modification required
The ARIA Splitter for LB634 Lamborghini Temerario pairs with the ARIA Carbon Fiber Front Air Guides for the complete front treatment; the whole program is the 7Design ARIA Carbon Fiber Body Kit

Frequently Asked Questions

What is the 7Design Splitter for LB634 Lamborghini Temerario made from? The ARIA Splitter for LB634 Lamborghini Temerario is laid up from pre-preg carbon fiber against tooling made by 7Design and built in the USA. Twill carbon is the standard finish, and forged carbon and tinted twill carbon are offered as paid options. All three share the same structural layup, so the finish is chosen on surface character.
Does the ARIA front splitter fit the standard Temerario bumper? Yes. It is designed around the factory front bumper of the LB634 Temerario and locates on the existing mounting points, so no cutting or drilling is needed. It is not designed to layer over a front lip from another maker, so a Temerario already carrying aftermarket front aero should be confirmed with the team before ordering.
How much ground clearance does the splitter take away? 7Design has not published a ride height figure for the ARIA splitter, so no number is quoted here. It is a front splitter on a mid-engined supercar and extends the lowest point of the nose forward, so owners who regularly meet steep driveways should plan for the same care any Temerario front lip demands.
Is the splitter functional or cosmetic? Both. The sculpted underside manages air at the leading edge, where the aerodynamic balance of a mid-engined car is set, and 7Design developed the ARIA aero surfaces in computational fluid dynamics rather than styling them alone. The visual effect of a lower, longer nose comes as a consequence of that work rather than instead of it.
How difficult is installation? Level-2 install difficulty. The splitter locates on the existing Temerario mounting points and needs no cutting or drilling, though a shop used to fitting carbon aero on exotics will get the gaps and the lower edge alignment right first time. Hardware, finishing and final alignment sit with the installing shop.

About 7Design

7Design is a design house based in New York that fuses carbon, art and performance for a short list of the world’s most desirable cars. Every ARIA component begins as a digital model refined over thousands of hours, with proportions, aerodynamic validation and panel integration settled before a mold is cut. Development runs in computational fluid dynamics, so the aero surfaces do measurable work rather than merely suggesting it, and every piece is built in the USA from the finest carbon fiber the firm can source. Twill, forged and tinted carbon are offered across the range, each treated as a considered choice rather than an afterthought.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.