Why choose LARTE Design for a BMW X5 body kit?

LARTE Design builds this kit in-house as a manufacturer, not a reseller of someone else's parts. Every component is hand-built and inspected under TÜV NORD certification, with the same OEM-level fitment standard LARTE applies across its full lineup.

Which BMW X5 models does this G05 X5 body kit fit?

This G05 X5 body kit fits both the pre-facelift 2019-2023 cars and the facelift G05 LCI 2023-2026 cars, across xDrive 40i, M50i, M50d, xDrive 30d, and xDrive 40d trims. Each order is matched to the exact generation and material before it ships.

Can I buy individual pieces instead of the full kit?

Yes. Every component in this kit is also sold on its own, so an owner can start with one piece, like the front bumper splitter or the rear diffuser, and build toward the full kit over time.

What's included in the BMW X5 body kit?

The kit covers the hood, front bumper splitter, side skirts, a rear bumper diffuser in either exhaust-tip configuration, hatch door lower spoiler, roof spoiler, and LARTE's emblem, with front grille trim, mirror covers, and fender trim included on the carbon fiber version.

Is this BMW X5 body kit made from carbon fiber?

It's available in 100% carbon fiber or LARTE's basalt-fiber composite, and every piece goes through quality control before it ships.

How much does this BMW X5 body kit cost?

Price varies by model year, material, and selected pieces, since the kit spans two generations and two finish options. The listed price reflects the selected configuration, and custom coloring can affect the total.

Can I get a BMW X5 body kit that looks upgraded without going overly aggressive?

Yes. LARTE builds this kit as a controlled visual update rather than a loud one, so the car reads sportier and more distinct without losing the X5's original character.

LARTE Design Body Kit for G05 BMW X5

The G05 X5 body kit from LARTE Design takes on the one problem a six-figure SUV can’t buy its way out of at the factory; from three cars back on the highway, an X5 in any trim looks like every other X5. LARTE has spent over a decade building carbon fiber body components for marques from Bentley to Rolls-Royce, and that same in-house, hand-built approach carries into this kit; every piece, from the front bumper splitter to the roof spoiler, is produced under LARTE’s own TÜV NORD-certified process rather than farmed out to a generic supplier. Built in either 100% carbon fiber or LARTE’s basalt-fiber composite, the kit reshapes the X5’s front, sides, and rear as one coordinated design rather than a stack of individual add-ons, and it’s available across both the pre-facelift G05 and the facelift G05 LCI, with pieces sold together or on their own.

Full BMW X5 Customization Without Mass-Market Tuning

Real BMW X5 customization isn’t about making the SUV louder. It’s about building an exclusive appearance that feels stronger, more distinct, and true to the owner’s own style. LARTE Design gives every X5 project a controlled design direction, whether that means finish and material choices, a handful of selected parts, or a complete build. The goal is an X5 that stands apart from the crowd without leaning on mass-market tuning clichés.

Installation & Fitment for Your BMW X5 Body Kit

Each BMW X5 body kit ships as an installation-ready package, fit precisely to the selected generation. As the manufacturer, LARTE Design runs its own quality control on every detail before delivery. Professional installation is recommended, and the final configuration should be confirmed before ordering. TÜV certification or a Teilegutachten is available where applicable for the chosen kit.
- Precise fitment for the selected BMW X5 generation
- Professional installation recommended
- Quality control before shipping
- TÜV / Teilegutachten where applicable
- Packaging prepared for international delivery

LARTE Design

LARTE Design has built exclusive body kits for premium and luxury vehicles since 2012, with work spanning Mercedes-Benz, BMW, Bentley, Cadillac, Infiniti, Maserati, and Tesla. Every kit is handcrafted, starting with clay modeling done directly on the car rather than in a computer, and finished with packaging built to survive worldwide shipping. Parts are built from carbon fiber or basalt-fiber composite, and the catalog runs from subtle wide-body upgrades to full body kit transformations, depending on how far an owner wants to take a given car.
- Philosophy: every stage is handled directly, starting with the first conversation with a personal manager and carrying through delivery in LARTE’s own packaging. Installation runs through partner ateliers worldwide or LARTE’s own facilities in Germany. Materials are certified before use, and the engineering standard applied doesn’t shift from one project to the next.
- Design: From Clay to Carbon. Every LARTE project begins with physical clay modeling on the car itself, not a computer render. Engineers and automotive designers then take those surfaces into 3D prototyping to refine them before anything is cut, which is why the finished panel reads as part of the original body instead of an add-on.
- Manufacture: production runs the full cycle in-house, from approved sketches through final assembly. LARTE builds with carbon fiber and basalt-fiber composite, and several of its manufacturing processes are patented. Nothing leaves the workshop until it has been tested, certified, and hand-inspected.
- Certification: German Standards. LARTE Design GmbH holds TÜV NORD certification, re-audited every three years across product quality, management systems, production processes, and personnel. Every carbon and composite component meets TÜV Germany’s certification standards, on the road and in the shop.

Features

Available in 100% carbon fiber or LARTE’s basalt-fiber composite
Built using LARTE’s patented layup and molding processes
Hand-built and inspected in-house in Germany under TÜV NORD certification
Carbon components finished in gloss lacquer, with custom colors available on request
Front grille trim, mirror covers, and front fender trim set included with carbon fiber version of the kit
Rear bumper diffuser offered in two exhaust-tip configurations, quad round tips or M60i-style tips (must be matched at the time of order)
Optional 4-piece brake light set integrates into the diffuser
Sold as a complete kit, with most pieces also available individually

What’s Included

Hood
Front bumper splitter center section (2019-2023 models)
Front bumper splitter side sections (2019-2023 models)
Front bumper splitter (2024-2026 models)
Side skirts
Rear bumper diffuser for round exhaust tips (option 1 for rear bumper diffuser)
Rear bumper diffuser for M60i-style exhaust tips (option 2 for rear bumper diffuser)
Diffuser brake lights set (optional for rear bumper diffuser)
Quad round exhaust tips (option 1 for exhaust tips)
M60i-style exhaust tips (option 2 for exhaust tips)
Hatch door lower spoiler
Roof spoiler
Emblem LARTE logo
Front grille trim (only included in carbon fiber version)
Mirror covers (only included in carbon fiber version)
Front fender trim set (only included in carbon fiber version)

Applications

BMW X5 M50d: G05 | 2018-2020
BMW X5 M50i: G05 | 2020-2023
BMW X5 xDrive30d: G05 | 2019-2026
BMW X5 xDrive40d: G05 | 2019-2026
BMW X5 xDrive40i: G05 | 2019-2026

Notes

Front bumper splitter for pre-facelift models consists of 3-pieces (center and side sections)
Rear bumper diffuser and exhaust tip selections must match at the time of order
Sold as a complete kit, each piece is sold individually as well
Material choice (carbon fiber or basalt composite) applies to the whole kit; pieces are not mixed between the two finishes within a single order
Custom coloring is available, please contact us for more information

Frequently Asked Questions

Why choose LARTE Design for a BMW X5 body kit? LARTE Design builds this kit in-house as a manufacturer, not a reseller of someone else’s parts. Every component is hand-built and inspected under TÜV NORD certification, with the same OEM-level fitment standard LARTE applies across its full lineup.
Which BMW X5 models does this G05 X5 body kit fit? This G05 X5 body kit fits both the pre-facelift 2019-2023 cars and the facelift G05 LCI 2023-2026 cars, across xDrive 40i, M50i, M50d, xDrive 30d, and xDrive 40d trims. Each order is matched to the exact generation and material before it ships.
Can I buy individual pieces instead of the full kit? Yes. Every component in this kit is also sold on its own, so an owner can start with one piece, like the front bumper splitter or the rear diffuser, and build toward the full kit over time.
What’s included in the BMW X5 body kit? The kit covers the hood, front bumper splitter, side skirts, a rear bumper diffuser in either exhaust-tip configuration, hatch door lower spoiler, roof spoiler, and LARTE’s emblem, with front grille trim, mirror covers, and fender trim included on the carbon fiber version.
Is this BMW X5 body kit made from carbon fiber? It’s available in 100% carbon fiber or LARTE’s basalt-fiber composite, and every piece goes through quality control before it ships.
How much does this BMW X5 body kit cost? Price varies by model year, material, and selected pieces, since the kit spans two generations and two finish options. The listed price reflects the selected configuration, and custom coloring can affect the total.
Can I get a BMW X5 body kit that looks upgraded without going overly aggressive? Yes. LARTE builds this kit as a controlled visual update rather than a loud one, so the car reads sportier and more distinct without losing the X5’s original character.

About LARTE Design

LARTE Design has built exclusive body kits for premium and luxury vehicles out of Germany since 2012, with completed programs across Mercedes-Benz, BMW, Bentley, Cadillac, Infiniti, Maserati, and Tesla. The company works the way a coachbuilder used to work before CAD took over the industry, starting every project with clay modeling done directly on the physical car before engineers move into 3D prototyping to finalize the surfaces, which is why LARTE panels tend to read as part of the car’s original design rather than an aftermarket addition. Every component is built from 100% carbon fiber using several manufacturing processes patented in-house, and the company holds TÜV NORD certification covering product quality, management systems, production processes, and personnel, recertified every three years, with nothing leaving the workshop until it has been tested, certified, and inspected by hand. Orders run through a personal manager from the first conversation through final delivery, and installation is available either through LARTE’s own facilities in Germany or its network of partner ateliers worldwide, giving owners a body kit engineered specifically for their car rather than adapted from a shared-platform template.

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

LARTE Design Body Kit for G05 BMW X5

Guaranteed Safe Checkout

LARTE Design Body Kit for G05 BMW X5

Full BMW X5 Customization Without Mass-Market Tuning

Installation & Fitment for Your BMW X5 Body Kit

LARTE Design

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About LARTE Design

Reviews