Is this a bolt-on trim?

No. Voltex states that processing is required for installation, since this piece is designed as a countermeasure for a specific area that interferes with the rear fender rather than a piece that simply attaches without prep. Confirm what processing is involved with us before ordering.

What problem does this actually solve?

Fender interference at a specific area on the ZN8 GR86 and ZD8 BRZ. Voltex developed this trim mainly as a countermeasure for that interference rather than as a cosmetic accent, which is why it's built thin, under 10mm, rather than shaped as a visible styling element.

Does this fit both the GR86 and BRZ?

Yes, this rear fender trim is designed for both the ZN8 GR86 and the ZD8 BRZ, since the two platforms share the same rear fender area this piece addresses.

What is it made from?

Urethane, supplied unpainted. The thin, under-10mm profile is deliberate, since the piece is meant to solve an interference problem without adding bulk in an already tight area.

Is this the same as the front fender trim?

No. The front fender trim is a cosmetic accent shaped around the factory turn signal, while this rear trim exists specifically to address fender interference and requires processing to install. The two serve different purposes despite the similar naming.

Does it come painted?

No. It's supplied unpainted, so it can be prepped and finished to match your car if the trim ends up visible once fitted.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Voltex Street & Light Circuit Version Rear Fender Trim for ZD8 / ZN8 Subaru BRZ and Toyota GR86

Voltex developed this rear fender trim as a clearance solution rather than a styling piece, aimed squarely at the area where the rear fender interferes with certain builds on the ZN8 GR86 and ZD8 BRZ. At under 10mm thick, it’s a thin, targeted piece designed to address that specific interference point rather than reshape the fender’s overall look. This is the practical counterpart to Voltex’s front fender trim, solving a fitment issue rather than adding an accent.

Construction

Built in urethane and supplied unpainted, at a thickness of less than 10mm. That thinness is intentional: Voltex designed this piece specifically to address fender interference without adding meaningful bulk to the area it covers.

Fitment Detail

Modification is required for installation. This is not a bolt-on trim; Voltex developed it as a countermeasure for the specific area that interferes with the rear fender, and fitting it correctly requires prep work at that location rather than a straightforward drop-on installation.

Features

Less than 10mm thick
Addresses rear fender interference at a specific area
Urethane construction, supplied unpainted

Applications

Toyota GR86: ZN8 | 2022-present
Subaru BRZ: ZD8 | 2022-present

Notes

Supplied unpainted; paint and prep are required before fitting
Professional installation recommended

Frequently Asked Questions

Is this a bolt-on trim? No. Voltex states that processing is required for installation, since this piece is designed as a countermeasure for a specific area that interferes with the rear fender rather than a piece that simply attaches without prep. Confirm what processing is involved with us before ordering.
What problem does this actually solve? Fender interference at a specific area on the ZN8 GR86 and ZD8 BRZ. Voltex developed this trim mainly as a countermeasure for that interference rather than as a cosmetic accent, which is why it’s built thin, under 10mm, rather than shaped as a visible styling element.
Does this fit both the GR86 and BRZ? Yes, this rear fender trim is designed for both the ZN8 GR86 and the ZD8 BRZ, since the two platforms share the same rear fender area this piece addresses.
What is it made from? Urethane, supplied unpainted. The thin, under-10mm profile is deliberate, since the piece is meant to solve an interference problem without adding bulk in an already tight area.
Is this the same as the front fender trim? No. The front fender trim is a cosmetic accent shaped around the factory turn signal, while this rear trim exists specifically to address fender interference and requires processing to install. The two serve different purposes despite the similar naming.
Does it come painted? No. It’s supplied unpainted, so it can be prepped and finished to match your car if the trim ends up visible once fitted.

About Voltex

Voltex is a Japanese aerodynamics specialist based in Suzuka, founded in 1995 by Nakajima, whose background includes composite bodywork for F3 and Formula Japan cars and engineering work in the UK on programs serving F1 and WRC. The company is best known for its carbon GT wings, and its diffusers, splitters, hoods and full aero packages carry the same priorities: hand-laid composite construction, functional shaping, and fitment tight enough to sit alongside factory panels. Voltex is what builders choose when the aero has to earn its place on the car.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Voltex Street & Light Circuit Version Rear Fender Trim for ZD8 / ZN8 Subaru BRZ and Toyota GR86 [VOL-86-FT-R]

Guaranteed Safe Checkout

Voltex Street & Light Circuit Version Rear Fender Trim for ZD8 / ZN8 Subaru BRZ and Toyota GR86

Construction

Fitment Detail

Features

Applications

Notes

Frequently Asked Questions

About Voltex

Reviews