What do the MMX G8X rear camber arm bearings do?

The MMX G8X rear camber arm bearings replace the factory rubber camber arm bushings with billet 6061-T6 pillow ball bearings. They remove the rubber deflection that changes rear camber under load, so the MMX bearing set keeps camber consistent for steady tire contact and predictable handling.

Does this fit both F8X and G8X M cars?

Yes. The MMX Performance rear camber arm bearing set fits the F8X M2, M3, and M4 and the G8X M2, M3, and M4, pressing into the factory rear camber arms on both chassis generations.

How is the camber arm bearing set sold?

It is sold as a complete rear camber arm bearing set with the bearings required for both rear camber arms on one vehicle, so a single kit completes the install on one car.

Does it change ride quality?

The pillow ball bearings add a small amount of road feel over rubber, which most M drivers prefer. In exchange the MMX bearing set delivers far more consistent rear camber and sharper response, especially under hard cornering and braking.

Is modification required?

No. The MMX rear camber arm bearing set is a direct-fit pressed replacement into the OEM rear camber arms with no cutting or welding. A press and basic suspension tools are recommended for a clean installation.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

MMX Performance OEM Rear Camber Arm Bearing Set for F8X and G8X BMW M2, M3, and M4

The MMX G8X rear camber arm bearings replace the factory rubber camber arm bushings on your BMW M2, M3, or M4 with precision pillow ball bearings machined from billet 6061-T6 aluminum. The OEM rubber lets the rear camber arm deflect under acceleration, braking, and cornering, causing unwanted geometry change; the MMX pillow ball design removes that compliance and provides a fixed pivot point that maintains rear camber throughout dynamic driving, for better tire contact, more consistent tire temperatures, and greater confidence on the street and the track. Installed as a direct-fit pressed replacement into the factory arms. Sold as a complete rear camber arm bearing set.

Features

Billet 6061-T6 aluminum pillow ball bearings replace the factory rubber camber arm bushings
Maintains rear camber under load for consistent tire contact and temperatures
Removes deflection for sharper chassis response and predictable handling
Direct-fit pressed replacement into the OEM rear camber arms
Lightweight billet construction with a precision-machined finish

Specifications

Material: Billet 6061-T6 aluminum
Bearing type: Precision pillow ball
Fitment: Rear camber arms
Sold as: Complete rear camber arm bearing set

Applications

BMW M2 (F87): 2016-2021
BMW M2 (G87): 2023-present
BMW M3 (F80): 2015-2018
BMW M3 (G80): 2021-present
BMW M4 (F82 / F83): 2015-2020
BMW M4 (G82 / G83): 2021-present

Notes

Pairs with the MMX G8X rear toe and traction arm bearing set for a fully spherical rear. Sold as a complete rear camber arm bearing set.

Frequently Asked Questions

What do the MMX G8X rear camber arm bearings do? The MMX G8X rear camber arm bearings replace the factory rubber camber arm bushings with billet 6061-T6 pillow ball bearings. They remove the rubber deflection that changes rear camber under load, so the MMX bearing set keeps camber consistent for steady tire contact and predictable handling.
Does this fit both F8X and G8X M cars? Yes. The MMX Performance rear camber arm bearing set fits the F8X M2, M3, and M4 and the G8X M2, M3, and M4, pressing into the factory rear camber arms on both chassis generations.
How is the camber arm bearing set sold? It is sold as a complete rear camber arm bearing set with the bearings required for both rear camber arms on one vehicle, so a single kit completes the install on one car.
Does it change ride quality? The pillow ball bearings add a small amount of road feel over rubber, which most M drivers prefer. In exchange the MMX bearing set delivers far more consistent rear camber and sharper response, especially under hard cornering and braking.
Is modification required? No. The MMX rear camber arm bearing set is a direct-fit pressed replacement into the OEM rear camber arms with no cutting or welding. A press and basic suspension tools are recommended for a clean installation.

About MMX Performance

MMX Performance builds precision billet aluminum suspension and hardware upgrades for modern BMW M vehicles. Each component is machined in-house from billet 6061-T6 aluminum and engineered to remove the compliance and compromises of factory rubber parts, giving drivers sharper response and more consistent performance on the street and the track.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

MMX Performance OEM Rear Camber Arm Bearing Set for F8X and G8X BMW M2, M3, and M4

Guaranteed Safe Checkout

MMX Performance OEM Rear Camber Arm Bearing Set for F8X and G8X BMW M2, M3, and M4

Features

Specifications

Applications

Notes

Frequently Asked Questions

About MMX Performance

Reviews