Does the Dinan M3 cold air intake fit the M2 and M4?

Yes. The Dinan M3 cold air intake fits the F80 BMW M3 and F82 / F83 M4 (2015-2020) and the F87 M2 Competition (2019-2021), all built around the S55 twin-turbo engine. It does not fit the earlier N55-powered F87 M2.

How much power does it add?

The Dinan M3 cold air intake adds up to +14hp at 6000 RPM and +21ft/lbs at 3000 RPM when coupled with engine tuning. The sealed airboxes, larger filters, and larger MAF housing raise airflow across the band and stack consistent gains over a stage 1 tune.

Is it legal where I live?

The intake is compliant under the EPA Tampering Policy and legal for on-street use in states that follow the Clean Air Act. It is not legal for sale or use in California; CARB testing for 50-state compliance is pending an Executive Order number.

Do I need a tune to see gains?

The quoted +14hp and +21ft/lbs figures are measured with engine tuning. The sealed airboxes and higher-flow filters improve airflow on their own, but the largest gains come when the intake is paired with a stage 2 DINANTRONICS tune over stage 1.

Is the airbox actually sealed?

Yes. The system uses dual airboxes that are roughly 20 percent larger than stock and fully sealed, which insulates the filters from hot underhood air and keeps intake temperatures down for more consistent power.

How hard is installation?

Installation is a bolt-on job of about 2 hours using factory mounting points, with no cutting required. The kit includes the carbon fiber tube, dual airboxes, filters, and MAF housing needed to complete the swap.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Dinan Carbon Fiber Cold Air Intake for F80 BMW M3, F82 / F83 M4, and F87 M2 Competition

Dinan F8X M3 intake is a carbon fiber, fully sealed induction system for the F80 BMW M3, F82 and F83 M4, and F87 M2 Competition, all running the S55 twin-turbo inline-six. Development focused on getting the most out of the factory intake layout, so the design routes cold outside air through an optimized carbon fiber tube with less resistance and a straighter path, feeding dual larger-volume airboxes and larger cylindrical filters. The sealed airboxes are roughly 20% larger and block power-robbing underhood heat, while a larger MAF housing and 30% larger filters keep flow high across the band. It makes up to 14hp at 6,000rpm and 21ft-lb at 3,000rpm with engine tuning, sharper throttle response, and a slightly sportier tone, with consistent gains over stage 1 when paired with the stage 2 DINANTRONICS tuner.

Features

Optimized carbon fiber intake tube for a straighter, freer-flowing path
Dual airboxes roughly 20% larger and fully sealed against power-robbing under hood heat
Dual cylindrical filters 30% larger for higher airflow
Larger MAF housing to support the added flow
Max gains of 14hp at 6,000rpm and 21ft-lb at 3,000rpm (with engine tuning)
Improved throttle response and a sportier intake tone
Consistent gains over stage 1 when paired with the stage 2 DINANTRONICS tuner
Bolt-on installation, roughly 2 hours

Applications

BMW M2 Competition: F87 | 2019-2021 | 3.0L Twin-Turbo I6 S55
BMW M3: F80 | 2015-2020 | 3.0L Twin-Turbo I6 S55
BMW M4: F82, F83 | 2015-2020 | 3.0L Twin-Turbo I6 S55

Notes

Fits the S55 F87 M2 Competition only, not the earlier N55-powered F87 M2
Not CARB approved; not for sale or use in California or other states requiring CARB certification. CARB testing for 50-state compliance is pending an Executive Order number

Frequently Asked Questions

Does the Dinan F8X M3 intake fit the M2 and M4? Yes. The Dinan F8X M3 intake fits the F80 BMW M3 and F82 and F83 M4 from 2015 through 2020 and the F87 M2 Competition from 2019 through 2021, all built around the S55 twin-turbo engine. It does not fit the earlier N55-powered F87 M2.
How much power does the Dinan F8X M3 intake add? The Dinan F8X M3 intake adds up to 14hp at 6,000rpm and 21ft-lb at 3,000 rpm when coupled with engine tuning. The sealed airboxes, larger filters, and larger MAF housing raise airflow across the band and stack consistent gains over a stage 1 tune with the stage 2 DINANTRONICS tuner.
Do I need a tune to see gains from the Dinan F8X M3 intake? The quoted 14hp and 21ft-lb figures are measured with engine tuning. The sealed airboxes and higher-flow filters improve airflow on their own, but the largest gains come when the intake is paired with a stage 2 DINANTRONICS tune over stage 1.
Is the airbox on the Dinan F8X M3 intake actually sealed? Yes. The system uses dual airboxes that are roughly 20% larger than stock and fully sealed, which insulates the filters from hot underhood air and keeps intake temperatures down for more consistent power. That sealing is what separates it from an open-element filter that heat-soaks.
How hard is the Dinan F8X M3 intake to install? Installation is a bolt-on job of about 2 hours using the factory mounting points, with no cutting required. The kit includes the carbon fiber tube, dual airboxes, filters, and MAF housing needed to complete the swap.

About Dinan

Founded in 1979, Dinan is North America’s leading BMW tuner, developing, manufacturing, and marketing a full line of high-performance products for BMW, MINI, and Mercedes-Benz. Dinan works through a nationwide network of Authorized Dinan Performance Centers, including select BMW dealerships and independent BMW service and performance shops. The company’s warranty program, introduced in 1996 with BMW of North America’s cooperation, matches BMW’s new car warranty and covers Dinan enhancements and the vehicle itself for up to 4 years or 50,000 miles. That coverage lets BMW owners add real performance without risking their factory warranty. Automotive publications have tested Dinan-enhanced BMWs against some of the world’s most exotic sports cars for three decades, and the results consistently hold up. Despite that performance, Dinan BMWs keep the reliability and everyday civility BMW owners expect. The product line spans engine, driveline, and chassis components across the full BMW lineup, covering acceleration, cornering, and stopping power. Every Authorized Dinan Performance Center can help build anything from a single upgrade to a complete Dinan BMW.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Dinan Carbon Fiber Cold Air Intake for F80 BMW M3, F82 / F83 M4, and F87 M2 Competition [D760-0045]

Guaranteed Safe Checkout

Dinan Carbon Fiber Cold Air Intake for F80 BMW M3, F82 / F83 M4, and F87 M2 Competition

Features

Applications

Notes

Frequently Asked Questions

About Dinan

Reviews