Is the Voltex S2000 swan neck wing available in other widths or materials?

No. This specific listing of the Voltex S2000 swan neck wing is a fixed configuration: 1700mm wet carbon with a 245mm bracket and SPL base. Only the end plate is selectable, from Type A through Type E.

Will this wing fit my S2000?

Yes. The bracket and SPL base are built specifically for the AP1 (2000-2003) and AP2 (2004-2009) Honda S2000, so the wing mounts without universal hardware or fabrication.

Why wet carbon instead of dry carbon on this build?

Wet carbon is a resin-rich carbon fiber layup with a deep gloss finish. Dry carbon, cured under pressure for a lighter weight, exists on other Voltex S2000 listings but is not offered on this particular configuration.

What does the SPL base do?

The SPL base is Voltex's special mounting base for the swan neck setup. Paired with the 245mm bracket, it carries the 378mm airfoil above the trunk without disturbing the underwing airflow.

What end plate options are available?

Type A, Type B, Type C, Type D, or Type E, selected at order time. Each end plate changes the wing's side profile and how it manages airflow spilling off the tips.

How is this wing sold and what are the lead times?

Every Voltex wing is hand-built and made to order in Suzuka, Japan, so it isn't held in stock. Lead times apply and vary by production queue; contact us for a current estimate before ordering.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Voltex 1700mm Wet Carbon Type 7.5 Swan Neck GT Wing w/ 245mm Bracket and SPL Base for AP1 & AP2 Honda S2000

The Voltex S2000 swan neck wing is a fixed 1700mm wet carbon build designed by Voltex Racing in Suzuka, Japan, exclusively for the AP1 and AP2 Honda S2000. Every Voltex S2000 swan neck wing in this configuration carries a 378mm airfoil above a center-mount swan neck, held by a 245mm bracket and Voltex’s special (SPL) base that locks into the S2000’s factory mounting points with no universal hardware needed. Width, material, and bracket height are fixed on this build; only the end plate is chosen from Type A, B, C, D, or E.

Features

The Voltex S2000 swan neck wing pairs a 378mm airfoil with a center-mount swan neck for undisturbed underwing airflow
Fixed 1700mm wet carbon construction; no other width or material option on this listing
245mm bracket and special (SPL) base built for AP1 / AP2 S2000-specific fitment
No universal mounting hardware; the bracket bolts directly into the S2000 chassis
Choice of Type A, B, C, D, or E end plates at order time

Specifications

Depth: 378mm
Width: 1700mm
Material: Wet carbon
Bracket height: 245mm
Base: Special (SPL) base
Mounting: Center-mount swan neck, AP1 / AP2 S2000-specific fitment
End plates: Type A, Type B, Type C, Type D, or Type E

Applications

Honda S2000: AP1, AP2 | 2000-2009

Notes

Made to order in Japan; lead times apply.
This Voltex S2000 swan neck wing ships in one fixed configuration: 1700mm, wet carbon, 245mm bracket, and SPL base. Only the end plate is selected at order time.

Frequently Asked Questions

Is the Voltex S2000 swan neck wing available in other widths or materials? No. This specific listing of the Voltex S2000 swan neck wing is a fixed configuration: 1700mm wet carbon with a 245mm bracket and SPL base. Only the end plate is selectable, from Type A through Type E.
Will this wing fit my S2000? Yes. The bracket and SPL base are built specifically for the AP1 (2000-2003) and AP2 (2004-2009) Honda S2000, so the wing mounts without universal hardware or fabrication.
Why wet carbon instead of dry carbon on this build? Wet carbon is a resin-rich carbon fiber layup with a deep gloss finish. Dry carbon, cured under pressure for a lighter weight, exists on other Voltex S2000 listings but is not offered on this particular configuration.
What does the SPL base do? The SPL base is Voltex’s special mounting base for the swan neck setup. Paired with the 245mm bracket, it carries the 378mm airfoil above the trunk without disturbing the underwing airflow.
What end plate options are available? Type A, Type B, Type C, Type D, or Type E, selected at order time. Each end plate changes the wing’s side profile and how it manages airflow spilling off the tips.
How is this wing sold and what are the lead times? Every Voltex wing is hand-built and made to order in Suzuka, Japan, so it isn’t held in stock. Lead times apply and vary by production queue; contact us for a current estimate before ordering.

About Voltex

Voltex Racing is a Japanese aerodynamics manufacturer based in Suzuka, Japan, producing GT wings, diffusers, spoilers, and body kits. The company pairs aerodynamic efficiency with aggressive design, using carbon fiber and FRP for lightweight strength. All Voltex products are hand-built and made to order.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.