Does the Akrapovic Slip-On Line for C8 Chevrolet Corvette fit a car without OPF/GPF?

No. The Akrapovic Slip-On Line for C8 Chevrolet Corvette is built for Stingrays with the factory OPF/GPF particulate filter. Cars without it need the standard Slip-On Line, SKU S-CO/TI/3, which uses different internal geometry to suit the unfiltered exhaust path. Fitting the wrong version causes clearance and alignment problems.

Is this exhaust legal for street use?

No. Akrapovic states plainly that this product does not meet emission compliance requirements for street or highway use. It carries no EC or ECE type approval and is intended strictly for racetrack and closed-course use. Check your state and local regulations before installing it on a road-registered car.

How much weight does this system save?

The slip-on line reduces exhaust weight by 15.3 kg (33.7 lb) compared to the factory system, a 47.2% reduction, bringing the installed titanium system down to 17.16 kg (37.8 lb) total.

Does installing this exhaust require an ECU tune?

Yes. Akrapovic requires ECU remapping as a mandatory part of the installation. Without it the factory fuel and emissions management cannot compensate for the changed exhaust flow, which affects drivability and engine protection.

What are the optional link pipe sets for?

Akrapovic offers optional link pipe sets as further upgrades alongside this slip-on line. They let you fine-tune sound and flow beyond the factory mid-pipe, and are sold separately from this listing. Akrapovic requires an ECU remap with either set.

How long does installation take?

Akrapovic estimates approximately 330 minutes, about five and a half hours, for professional installation. Given the mandatory ECU remap and the precision fitment of the titanium components, we recommend a shop experienced with performance exhaust work on the C8.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Akrapovic Titanium Slip-On Line for C8 Chevrolet Corvette Stingray

Akrapovic’s Slip-on line for C8 Chevrolet Corvette Stingray is engineered to replace the entire rear exhaust section with a full titanium muffler, tailpipes, and connecting pipes. Every component is hand-TIG-welded from aerospace-grade titanium, cutting significant weight from the rear of the car while reshaping the exhaust note into something far closer to what the LT2 V8 deserves. At idle and low RPM the system delivers a deep, resonant V8 throb; as revs climb, dual-diameter connecting tubes, tuned independently for stiffness and acoustic character, open the note into a rich, aggressive roar without drifting into drone at a high speed cruise. Dual square-profile titanium tailpipes with a black-finished interior give the rear fascia a purposeful, track-ready look that matches the sound.

Features

Full titanium construction across the muffler, tailpipes, and connecting pipes for maximum weight savings
Dual square-profile titanium tailpipes with a black-finished interior
Dual-diameter connecting tubes engineered independently for structural rigidity and exhaust note
Specifically engineered for OPF/GPF-equipped C8 models (not compatible with non-OPF/GPF cars)
Deep low-RPM tone that opens into an aggressive, resonant high-RPM note
Direct-fit replacement for the factory rear exhaust section

Specifications

Material: Titanium (muffler, tailpipes, connecting pipes)
Weight savings: 15.3 kg (33.7 lb) vs. stock, 47.2% lighter
Installed system weight: 17.16 kg (37.8 lb)
Power gain: +3.4 kW (4.6 hp) at 5,250 rpm
Torque gain: +8.2 Nm (6.0 lb-ft) at 3,100 rpm

Applications

Chevrolet Corvette Stingray: C8 | 2020 to present

Notes

This product does not meet emission compliance requirements for street or highway use, intended for racetrack and closed-course use only
Manufacturer installation instructions: download the PDF
Fitment is specific to the C8 platform and years listed above. For any questions on fitment or specifications, Contact us and we will confirm the correct part for your build

Frequently Asked Questions

Does the Akrapovic Slip-On Line for C8 Chevrolet Corvette fit a car without OPF/GPF? No. The Akrapovic Slip-On Line for C8 Chevrolet Corvette is built for Stingrays with the factory OPF/GPF particulate filter. Cars without it need the standard Slip-On Line, SKU S-CO/TI/3, which uses different internal geometry to suit the unfiltered exhaust path. Fitting the wrong version causes clearance and alignment problems.
Is this exhaust legal for street use? No. Akrapovic states plainly that this product does not meet emission compliance requirements for street or highway use. It carries no EC or ECE type approval and is intended strictly for racetrack and closed-course use. Check your state and local regulations before installing it on a road-registered car.
How much weight does this system save? The slip-on line reduces exhaust weight by 15.3 kg (33.7 lb) compared to the factory system, a 47.2% reduction, bringing the installed titanium system down to 17.16 kg (37.8 lb) total.
Does installing this exhaust require an ECU tune? Yes. Akrapovic requires ECU remapping as a mandatory part of the installation. Without it the factory fuel and emissions management cannot compensate for the changed exhaust flow, which affects drivability and engine protection.
What are the optional link pipe sets for? Akrapovic offers optional link pipe sets as further upgrades alongside this slip-on line. They let you fine-tune sound and flow beyond the factory mid-pipe, and are sold separately from this listing. Akrapovic requires an ECU remap with either set.
How long does installation take? Akrapovic estimates approximately 330 minutes, about five and a half hours, for professional installation. Given the mandatory ECU remap and the precision fitment of the titanium components, we recommend a shop experienced with performance exhaust work on the C8.

About Akrapovic

Akrapovic is a manufacturer of premium exhaust systems for motorcycles and performance cars, recognized globally for its use of advanced technology and high-quality materials. The company’s state-of-the-art facilities in Slovenia include an in-house titanium foundry and metallurgical laboratory, giving it full control over the materials and processes behind every component it produces. With over 1,500 employees and distribution across more than eighty countries, Akrapovic’s roots in motorsport run deep. The knowledge gained from supporting MotoGP, WorldSBK, MXGP, DTM, and other racing programs feeds directly into the street and performance car products it builds, including the Titanium Slip-On Line for the Chevrolet Corvette Stingray.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Akrapovic Titanium Slip-On Line for C8 Chevrolet Corvette Stingray [S-CO/TI/4]

Guaranteed Safe Checkout

Akrapovic Titanium Slip-On Line for C8 Chevrolet Corvette Stingray

Features

Specifications

Applications

Notes

Frequently Asked Questions

About Akrapovic

Reviews