Brixton Forged MgCarbon+ Series FDE11 Wheel

Material selection at the wheel level isn’t an afterthought on a supercar or hypercar, and the MgCarbon+ Series was built with that in mind. The 2-piece construction pairs an AZ80 magnesium face with a DYMAG carbon fiber barrel, bringing total weight down approximately 30% compared to forged aluminum by volume. That reduction feeds directly into acceleration, handling response, and chassis feel on platforms engineered to register those changes. AZ80 magnesium brings 12% greater specific strength than aluminum along with strong dampening and shock absorption characteristics, keeping the wheel structurally capable and the ride composed through the kind of hard, sustained use these cars are designed to handle.

DYMAG Weight Comparison

• DYMAG builds from the limits of braking, acceleration, and handling, and the carbon fiber barrels used in the MgCarbon+ Series come from that engineering philosophy. The weight advantage over cast aluminum reaches 40%, with a 20% reduction over forged aluminum, and both figures translate into how the car responds under real driving loads rather than existing only on paper. Every DYMAG barrel is validated against TÜV, SAE, JWL, and VIA certification standards, with FEA used to develop and refine the structural design alongside physical testing rather than as a replacement for it.
  • Cast Aluminum Weight: 15kg (based on 20×9.0) (100%)
  • Forged Aluminum Weight: 12kg (20% reduction) (80%)
  • DYMAG Carbon Fiber Weight: 9kg (40% reduction) (60%)

DYMAG Carbon Fiber Barrel Options

• Barrels for the MgCarbon+ Series are available in twill and forged carbon fiber, with multiple finish treatments under each to suit the build. Full carbon fiber barrel configurations are offered, as well as options that bring the carbon to the outer lip only, with gloss and satin finishes available across select styles.
  • Full gloss twill carbon fiber barrel
  • Full satin twill carbon fiber barrel
  • Gloss forged carbon fiber outer lip only
  • Satin forged carbon fiber outer lip only
  • Full gloss forged carbon fiber barrel
  • Full satin forged carbon fiber barrel

Hardware Options

• Every piece of assembly hardware on the MgCarbon+ 2-piece is fully exposed titanium. Where most builds default to stainless steel, titanium is used here across the board. The reasons are partly visual, but on a wheel constructed specifically to minimize mass, the weight savings at the hardware level fit the same logic driving every other material decision on the wheel.
  • PVD black
  • Raw

Center-Cap Options

• Brixton Forged’s original center-cap options are available across all standard 5-lug PCD applications, covering the most commonly used platforms without requiring any custom fitment work.
  • Satin piano black
  • Classic gloss twill carbon fiber
  • Gloss forged carbon fiber
• Centerlock fitments are addressed through dedicated options developed for specific vehicles. Brixton Forged also produces direct OEM badge replacements for Porsche and Lamborghini centerlock applications.
  • Classic gloss twill carbon fiber
  • Gloss forged carbon fiber

Text & Groove Fill Options

• Brixton’s Text and Groove Fill program gives buyers a way to bring color into specific design elements without changing the base finish. Epoxy accents can be applied to the Brixton logo, wheel name, series name, and design-specific grooves or spokes, with up to 3 fill locations available per wheel depending on the design. Standard colors are Black, Blue, Green, Grey, Orange, Purple, Red, White, and Yellow, with any color outside that range available on request.

Finishing Options

• The MgCarbon+ Series runs through Brixton Forged’s standard powder-coat color range, which is updated each year through collaboration with international partners. Gloss, matte, satin, and textured options are carried forward with consistency and intention rather than changed for the sake of it.
  • Firecracker black
  • Forged bronze
  • Gloss blue
  • Gloss green
  • Gloss grey
  • Gloss orange
  • Gloss purple
  • Gloss red
  • Gloss yellow
  • Hastings blue
  • Kingsport grey
  • Lunar white
  • ODB
  • Sterling silver
  • Trofeo gold

Features

• MgCarbon+ Series
• 2-piece AZ80 magnesium & DYMAG carbon fiber
• 30% lighter than forged aluminum by volume
• High dampening / Shock absorption for better handling
• Weight reduction back-pad pocketing & water channeling
• 12% stronger than aluminum
• Micro-arc oxidation coating & various powder-coat options

Specifications

• Construction: 2-piece ultra-lightweight magnesium+ / carbon+
• Sizing:
  • 18″:
    • 18×8
    • 18×9.5
    • 18×11
    • 18×13
  • 19″:
    • 19×8
    • 19×9.5
    • 19×10
  • 20″:
    • 20×9
    • 20×9.5
    • 20×10
    • 20×10.5
    • 20×11
    • 20×12
    • 20×12.5
  • 21″:
    • 21×9.5
    • 21×10
    • 21×11
    • 21×12.5
    • 21×13
  • 22″:
    • 22×10.5
    • 22×12.5
• Offsets: Custom
• Hardware: Fully exposed

Other FDE11 Configurations

• AEROTECH SERIES vented modular classic profile
• CARBON+ SERIES 2-piece lightweight carbon+
• FDE SERIES 1-piece lightweight monoblock
• FDE SERIES 2-piece concave duoblock
• FDE SERIES 3-piece floated deep concave
• MAGNESIUM+ SERIES 1-piece lightweight magnesium+ monoblock

Notes

• All Brixton Forged wheels are individually crafted from the finest materials to your individual spec. There are no “off the shelf” Brixton wheels and as such, a lead time of a few weeks is to be expected once your spec has been finalized. The Bulletproof Team will serve as your concierge throughout the entire process to ensure you get the perfect wheel for your application.
• Standard PCD center caps are not available in any PCD lower than 100mm, OEM center cap adapters may be required
• If the Text & Groove Fill option is selected, a Bulletproof Automotive Wheel Specialist will reach out to you to go over options. Please note, only up to 3 fill instances are available per wheel; all color options are available.

About Brixton Forged

Brixton Forged™ wheels are entirely conceived and hand-crafted in their manufacturing facility based in Los Angeles, California. With its origins in Los Angeles, their product development team brings decades of experience in creating the highest quality forged wheels in the industry. The team consists of professional Mechanical Engineers and Machinists who spare no effort in the product development process, ensuring no corners are cut. They have a thorough understanding of Vehicle Dynamics, OEM load ratings, and Material Science, equipping them with the necessary skills to engineer wheels that are not only visually stunning but also safe and designed to perform. Brixton Forged has its own team of Mechanical Engineers and technical staff who individually engineer and conduct FEA testing on every wheel set. Their product development team’s wealth of experience enables them to consistently deliver wheels of the highest quality in the industry. Their team of professional Mechanical Engineers ensures no compromises are made throughout the product development process. With a deep understanding of Vehicle Dynamics, OEM load ratings, and Material Science, their team possesses the necessary skills to engineer wheels that are both visually impressive and safe, designed to deliver exceptional performance.