What vehicles are these mirror covers compatible with?

The TREVORA Carbon Mirror Cover Set is confirmed for the 2024 and newer BMW M5 G90 Sedan, the 2024 and newer BMW M5 Touring G99, the 2024 and newer BMW 5 Series G60, and the 2024 and newer BMW i5 M60 G60. The G45 X3 M50 is also reported as compatible; buyers with this model should confirm fitment with Bulletproof Automotive before purchasing.

Are both left and right covers included?

Yes. The set includes both the left and right mirror covers as a complete pair. No additional purchase is required to cover both sides of the vehicle.

Does installation require modification to the factory mirror assembly?

No. The covers use the same mounting architecture as the factory mirror housings, allowing for a direct swap without modification to the mirror assembly or the need for additional hardware. Professional installation is recommended to ensure the factory clips and mounting tabs are not damaged during the removal of the original covers.

Why is the G45 X3 M50 listed as needing fitment confirmation?

The G45 X3 M50 shares platform architecture with the G60 5 Series but uses a different body style. The covers are reported to fit the G45 X3 M50, but this fitment is not independently verified to the same standard as the G90, G99, and G60 applications. Buyers with a G45 X3 M50 should confirm the mounting clip geometry matches before purchasing.

How do these mirror covers compare to the TREVORA G60/G45 mirror covers sold under SKU TR-BG60MCCFL?

Both sets are pre-preg 2x2 twill carbon mirror covers for the G60 5 Series and G45 platforms sharing the same high-gloss finish and direct OEM replacement design. The difference is the SKU designation and the specific included application confirmation; the TR-BG60MCCFML set is the version confirmed for the G90 M5 and G99 M5 Touring in addition to the G60. Confirm with Bulletproof Automotive which set is correct for your specific vehicle before purchasing.

What is pre-preg carbon fiber and why does it produce a better finish than wet-laid carbon?

Pre-preg carbon fiber is manufactured by pre-impregnating the carbon fabric with a precisely controlled resin ratio before the component is formed and cured. This delivers consistent weave alignment, optimal resin saturation, and a uniform high-gloss finish across the full surface of both covers. Wet-laid carbon applies resin manually, making consistent distribution harder to control on curved surfaces like a mirror housing. On a component at eye level that is examined closely from the side of the car, the surface quality of pre-preg construction is directly visible and reflects the care taken in manufacturing.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Trevora Carbon Mirror Covers for G9x / G60 BMW 5 Series, M5 & i5 M60

Mirror covers sit at eye level along the side of the vehicle and are examined closely from every approach angle. For a carbon replacement to read as a genuine material upgrade rather than a surface-level change, it needs to match the factory housing geometry precisely and carry a finish that holds up under that scrutiny. The TREVORA covers are built to both requirements. Each cover uses a 2×2 twill pre-preg carbon fiber layup, a construction method that applies resin at a controlled ratio before the component is formed and cured. The pre-preg process delivers consistent weave alignment, uniform surface quality, and optimal resin saturation across the full housing surface, producing a high-gloss finish that closely matches the quality standard of original BMW M Performance accessories. The reduced resin content compared to wet-laid carbon also means the covers are lighter than equivalent painted plastic units, contributing a small but genuine weight reduction at the door mirrors.

Carbon Fiber Construction

Constructed using high-quality autoclave-cured pre-preg carbon fiber for superior strength-to-weight ratio. Each component is engineered and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. A UV-resistant clear coat protects the clean weave pattern and maintains finish quality over time, ensuring long-term durability in both daily driving and high-performance environments.

Features

Pre-preg carbon fiber construction with 2×2 twill weave and high-gloss clear coat finish
Direct OEM replacement; uses the same mounting architecture as factory mirror housings
Consistent weave alignment and uniform surface quality across both left and right covers
Lighter than factory painted plastic mirror covers
High-gloss finish closely matching BMW M Performance accessory quality standard
Includes both left and right covers as a complete set
Available in both Left and Right hand drive
Backed by Trevora’s industry-leading 5-year warranty

Included in Box

Mirror Cover Set
Required mounting hardware
Installation instructions

Applications

BMW 520d: G60, G61| 2023-present
BMW 530d: G60, G61 | 2023-present
BMW 550e: G60, G61 | 2023-present
BMW 520i: G60, G61 | 2023-present
BMW 530i: G60, G61 | 2023-present
BMW 540i: G60, G61 | 2023-present
BMW i5 eDrive40: G60, G61 | 2024-present
BMW i5 M60: G60, G61 | 2024-present
BMW M5: G90, G99 | 2024-present

Notes

G45 X3 M50 fitment reported; please contact us before placing your order

Frequently Asked Questions

What vehicles are these mirror covers compatible with? The TREVORA Carbon Mirror Cover Set is confirmed for the 2024 and newer BMW M5 G90 Sedan, the 2024 and newer BMW M5 Touring G99, the 2024 and newer BMW 5 Series G60, and the 2024 and newer BMW i5 M60 G60. The G45 X3 M50 is also reported as compatible; buyers with this model should confirm fitment with Bulletproof Automotive before purchasing.
Are both left and right covers included? Yes. The set includes both the left and right mirror covers as a complete pair. No additional purchase is required to cover both sides of the vehicle.
Does installation require modification to the factory mirror assembly? No. The covers use the same mounting architecture as the factory mirror housings, allowing for a direct swap without modification to the mirror assembly or the need for additional hardware. Professional installation is recommended to ensure the factory clips and mounting tabs are not damaged during the removal of the original covers.
Why is the G45 X3 M50 listed as needing fitment confirmation? The G45 X3 M50 shares platform architecture with the G60 5 Series but uses a different body style. The covers are reported to fit the G45 X3 M50, but this fitment is not independently verified to the same standard as the G90, G99, and G60 applications. Buyers with a G45 X3 M50 should confirm the mounting clip geometry matches before purchasing.
How do these mirror covers compare to the TREVORA G60/G45 mirror covers sold under SKU TR-BG60MCCFL? Both sets are pre-preg 2×2 twill carbon mirror covers for the G60 5 Series and G45 platforms sharing the same high-gloss finish and direct OEM replacement design. The difference is the SKU designation and the specific included application confirmation; the TR-BG60MCCFML set is the version confirmed for the G90 M5 and G99 M5 Touring in addition to the G60. Confirm with Bulletproof Automotive which set is correct for your specific vehicle before purchasing.
What is pre-preg carbon fiber and why does it produce a better finish than wet-laid carbon? Pre-preg carbon fiber is manufactured by pre-impregnating the carbon fabric with a precisely controlled resin ratio before the component is formed and cured. This delivers consistent weave alignment, optimal resin saturation, and a uniform high-gloss finish across the full surface of both covers. Wet-laid carbon applies resin manually, making consistent distribution harder to control on curved surfaces like a mirror housing. On a component at eye level that is examined closely from the side of the car, the surface quality of pre-preg construction is directly visible and reflects the care taken in manufacturing.

About Trevora

Trevora (formerly TRE) is a UK-based automotive aero and styling brand specializing in high-performance pre-preg carbon fiber components. Founded in 2018, Trevora has grown into a globally recognized name in BMW aftermarket parts, known for its OEM+ philosophy, precision engineering, and uncompromising attention to detail. Every component is designed, engineered, and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. By utilizing autoclave-cured pre-preg carbon fiber, Trevora delivers a superior strength-to-weight ratio while eliminating inconsistencies found in traditional wet-lay carbon. All products are backed by Trevora’s industry-leading 5-year warranty.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.