What vehicles is the TREVORA ID-01 pack compatible with?

The TREVORA ID-01 Carbon Front Splitter and Rear Spoiler Pack is designed for the 2021 and newer BMW M240i G42 and the 2021 and newer BMW 2 Series G42 in M Sport trim. The front splitter is compatible with the M Sport front bumper configuration only; the standard non-M Sport G42 bumper uses a different shape and the splitter will not fit correctly on that variant. Confirm your bumper specification before ordering.

Does the ID-01 pack include everything needed for installation?

Yes. The front splitter uses OEM mounting points and no additional hardware is required for that component. The rear spoiler comes with pre-applied 3M double-sided automotive tape and an included adhesive promoter; nothing additional needs to be sourced to complete the spoiler installation. Both installations can be completed without specialist tools.

How long does the rear spoiler installation take?

The rear spoiler installation takes approximately 30 minutes from surface preparation to fitting. A one-hour tape cure period is recommended after installation before driving the vehicle; moving the car before the adhesive has fully set may compromise the bond and affect the long-term security of the fitment.

What does the 2-year warranty cover?

The 2-year warranty covers manufacturing defects on both the front splitter and rear spoiler. It does not cover damage resulting from installation, road use, contact with road debris, or improper maintenance of the carbon fiber surfaces. Contact Bulletproof Automotive with any warranty concerns.

Is this pack better value than buying the front splitter and rear spoiler separately?

The ID-01 pack combines both components in a single purchase and ensures both parts share the same production batch, meaning consistent finish quality and weave alignment between the front splitter and rear spoiler. Buying separately introduces the possibility of minor batch-to-batch variation in finish. The pack also simplifies the purchasing process for owners who plan to upgrade both ends of the car.

Can the ID-01 spoiler and splitter be removed if needed?

Yes. Both the front splitter and the rear spoiler are designed for reversible installation. The front splitter uses OEM mounting points and can be removed without modification to the bumper. The rear spoiler uses pre-applied 3M tape which is a permanent adhesive system; removal after full cure should be approached carefully as it may affect the paint or surface finish of the boot lid. Neither installation requires permanent modification to the vehicle structure.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Trevora ID-01 Carbon Front Splitter & Rear Spoiler Pack for G42 BMW M240i

The ID-01 pack is built around the principle that front and rear aero upgrades work better as a matched pair. Buying the front splitter and rear spoiler separately addresses one end of the car and leaves the other visually incomplete; the pack addresses both in a single step with components that share the same design language, the same manufacturing standard, and the same finish quality. The result is a G42 that reads as cohesively upgraded rather than partially modified. The ID-01 Front Splitter extends the lower front bumper with a full-length design and sharp central edges that sharpen the front-end profile without departing from the factory proportions of the M Sport bumper. It uses all OEM mounting points on the G42 M Sport front bumper for installation, requiring no additional drilling or bolting into the bumper structure. The front splitter is compatible with M Sport bumper variants only; buyers should confirm their bumper specification before ordering. The ID-01 Rear Spoiler replaces the factory boot lid lip with a clean, defined rear deck treatment that adds visual presence and a degree of aerodynamic function to the rear end. Installation uses pre-applied 3M double-sided automotive tape and the included adhesive promoter, taking approximately 30 minutes to complete with a one-hour tape cure period before the car should be driven. Both the spoiler and the splitter are reversible installations that do not require permanent modification to the vehicle.

Carbon Fiber Construction

Constructed using high-quality autoclave-cured pre-preg carbon fiber for superior strength-to-weight ratio. Each component is engineered and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. A UV-resistant clear coat protects the clean weave pattern and maintains finish quality over time, ensuring long-term durability in both daily driving and high-performance environments.

Features

Two-component ID-01 aero pack covering both front and rear of the G42 M240i
Pre-preg carbon fiber, 2×2 twill weave construction across both components
Matched ID-01 design language; sharp-edged clean aesthetic consistent front to rear
2-year warranty on manufacturing defects for both components
Front splitter uses OEM mounting points; no additional drilling required
Rear spoiler installs with pre-applied 3M double-sided automotive tape and included adhesive promoter
Rear spoiler installation time approximately 30 minutes plus one-hour tape cure
Both installations are reversible; no permanent modification to the vehicle
Backed by Trevora’s industry-leading 5-year warranty

Included in Box

Carbon Front Splitter
Carbon Rear Spoiler
Required mounting hardware
Installation instructions

Applications

BMW M240i: G42 | 2021-present

Notes

Front splitter compatible with M Sport bumper only; confirm bumper specification before ordering

Frequently Asked Questions

What vehicles is the TREVORA ID-01 pack compatible with? The TREVORA ID-01 Carbon Front Splitter and Rear Spoiler Pack is designed for the 2021 and newer BMW M240i G42 and the 2021 and newer BMW 2 Series G42 in M Sport trim. The front splitter is compatible with the M Sport front bumper configuration only; the standard non-M Sport G42 bumper uses a different shape and the splitter will not fit correctly on that variant. Confirm your bumper specification before ordering.
Does the ID-01 pack include everything needed for installation? Yes. The front splitter uses OEM mounting points and no additional hardware is required for that component. The rear spoiler comes with pre-applied 3M double-sided automotive tape and an included adhesive promoter; nothing additional needs to be sourced to complete the spoiler installation. Both installations can be completed without specialist tools.
How long does the rear spoiler installation take? The rear spoiler installation takes approximately 30 minutes from surface preparation to fitting. A one-hour tape cure period is recommended after installation before driving the vehicle; moving the car before the adhesive has fully set may compromise the bond and affect the long-term security of the fitment.
What does the 2-year warranty cover? The 2-year warranty covers manufacturing defects on both the front splitter and rear spoiler. It does not cover damage resulting from installation, road use, contact with road debris, or improper maintenance of the carbon fiber surfaces. Contact Bulletproof Automotive with any warranty concerns.
Is this pack better value than buying the front splitter and rear spoiler separately? The ID-01 pack combines both components in a single purchase and ensures both parts share the same production batch, meaning consistent finish quality and weave alignment between the front splitter and rear spoiler. Buying separately introduces the possibility of minor batch-to-batch variation in finish. The pack also simplifies the purchasing process for owners who plan to upgrade both ends of the car.
Can the ID-01 spoiler and splitter be removed if needed? Yes. Both the front splitter and the rear spoiler are designed for reversible installation. The front splitter uses OEM mounting points and can be removed without modification to the bumper. The rear spoiler uses pre-applied 3M tape which is a permanent adhesive system; removal after full cure should be approached carefully as it may affect the paint or surface finish of the boot lid. Neither installation requires permanent modification to the vehicle structure.

About Trevora

Trevora (formerly TRE) is a UK-based automotive aero and styling brand specializing in high-performance pre-preg carbon fiber components. Founded in 2018, Trevora has grown into a globally recognized name in BMW aftermarket parts, known for its OEM+ philosophy, precision engineering, and uncompromising attention to detail. Every component is designed, engineered, and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. By utilizing autoclave-cured pre-preg carbon fiber, Trevora delivers a superior strength-to-weight ratio while eliminating inconsistencies found in traditional wet-lay carbon. All products are backed by Trevora’s industry-leading 5-year warranty.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Trevora ID-01 Carbon Front Splitter & Rear Spoiler Pack for G42 BMW M240i [TR-BG42ID01FSRSCF]

Guaranteed Safe Checkout