What is included in the TR87 Low-Line Carbon Body Kit?

The TR87 Low-Line kit includes four components: the TR87 Flat Front Splitter, TR87 Flat Side Skirt Set, ID-01 Rear Spoiler, and Performance Rear Diffuser. All four are constructed from 2x2 twill pre-preg carbon fiber. The kit does not include rear wing, grilles, air ducts, front bumper trim, or rear bumper winglets, which are part of the TR87 Ultimate Kit.

What is the difference between the Low-Line kit and the TR87 Ultimate Carbon Kit?

The TR87 Ultimate Carbon Kit includes every TR87 exterior element including the winged front splitter, winged side skirts, front grilles, front air ducts, front bumper centre trim, rear bumper winglets, rear diffuser, and carbon rear wing with aluminum legs. The Low-Line kit is a focused four-component package built around flat, winglet-free components; the flat front splitter and flat side skirts replace the winged variants, the ID-01 rear spoiler replaces the rear wing, and the Performance Rear Diffuser rounds out the rear end. The Low-Line is the right choice for owners who want a complete but more understated carbon aero package rather than the full TR87 program.

Do any components in the Low-Line kit require drilling or permanent modification?

The TR87 Flat Front Splitter and TR87 Flat Side Skirts use OEM mounting points and do not require drilling or permanent modification to the factory bumper or rocker panels. The installation method for the ID-01 Rear Spoiler and Performance Rear Diffuser should be confirmed with Bulletproof Automotive before fitting, as the source material does not specify the mounting method for these components within this kit.

Why does the Low-Line kit use the flat splitter and skirts rather than the winged TR87 variants?

The flat design language is the defining characteristic of the Low-Line kit. The flat splitter and skirts prioritize clean integration with the G87's factory bumper and sill lines, adding carbon presence and a more resolved lower body appearance without the extended winglet elements of the TR87 winged variants. For owners who prefer a measured OEM+ approach to the exterior rather than a full aero transformation, the flat components are the more appropriate choice.

Is the ID-01 Rear Spoiler the same component as the TREVORA ID-01 spoiler sold individually?

The ID-01 Rear Spoiler in the Low-Line kit shares the same design designation as the TREVORA ID-01 spoiler in the G87 M2 lineup. It adds a subtle rear-end definition to the boot lid with a clean, low-profile design that complements the flat aesthetic of the splitter and skirts. Contact Bulletproof Automotive to confirm exact specifications if needed.

Can I upgrade from the Low-Line kit to the full TR87 program later?

Yes. The TR87 winged front splitter, winged side skirts, front grilles, front air ducts, front bumper centre trim, rear bumper winglets, and TR87 rear wing are all available as individual purchases within the TREVORA G87 M2 lineup. Owners who start with the Low-Line kit and later want to build toward the full TR87 program can do so by adding individual components. The Performance Rear Diffuser and ID-01 Rear Spoiler included in the Low-Line kit remain compatible with the broader TR87 package.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Trevora TR87 Low-Line Carbon Body Kit for G87 BMW M2

The TR87 Low-Line kit is built for G87 M2 owners who want a considered carbon aero upgrade rather than the full TR87 transformation. The flat design language running through the splitter and side skirts means no winglets, no extended aero elements at the corners, and no visual statement that competes with the G87’s factory proportions. The result is a car that reads as more resolved and more intentional from every angle without announcing the modification loudly.

Carbon Fiber Construction

Constructed using high-quality autoclave-cured pre-preg carbon fiber for superior strength-to-weight ratio. Each component is engineered and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. A UV-resistant clear coat protects the clean weave pattern and maintains finish quality over time, ensuring long-term durability in both daily driving and high-performance environments.

Features

Four-component aero package in 2×2 twill pre-preg carbon fiber
Flat design language throughout; no winglets on front splitter or side skirts
ID-01 Rear Spoiler adds rear-end definition and aerodynamic performance at the boot lid
Performance Rear Diffuser completes the rear underbody treatment
CAD-engineered fitment across all components
Restrained, understated aesthetic suited to OEM+ or lower-key carbon builds
Developed in the United Kingdom in collaboration with AUTOID
Backed by Trevora’s industry-leading 5-year warranty

Included in Box

TR87 Flat Front Splitter
TR87 Flat Side Skirts
ID-01 Rear Spoiler
Performance Rear Diffuser
Required mounting hardware
Installation instructions

Applications

BMW M2: G87 | 2023-present

Notes

TR87 Flat Front Splitter uses OEM mounting points; no permanent bumper modification required
TR87 Flat Side Skirt Set uses OEM mounting points; no permanent rocker panel modification required

Frequently Asked Questions

What is included in the TR87 Low-Line Carbon Body Kit? The TR87 Low-Line kit includes four components: the TR87 Flat Front Splitter, TR87 Flat Side Skirt Set, ID-01 Rear Spoiler, and Performance Rear Diffuser. All four are constructed from 2×2 twill pre-preg carbon fiber. The kit does not include rear wing, grilles, air ducts, front bumper trim, or rear bumper winglets, which are part of the TR87 Ultimate Kit.
What is the difference between the Low-Line kit and the TR87 Ultimate Carbon Kit? The TR87 Ultimate Carbon Kit includes every TR87 exterior element including the winged front splitter, winged side skirts, front grilles, front air ducts, front bumper centre trim, rear bumper winglets, rear diffuser, and carbon rear wing with aluminum legs; the full TR87 transformation. The Low-Line kit is a focused four-component package built around flat, winglet-free components; the flat front splitter and flat side skirts replace the winged variants, the ID-01 rear spoiler replaces the rear wing, and the Performance Rear Diffuser rounds out the rear end. The Low-Line is the right choice for owners who want a complete but more understated carbon aero package rather than the full TR87 program.
Do any components in the Low-Line kit require drilling or permanent modification? The TR87 Flat Front Splitter and TR87 Flat Side Skirts use OEM mounting points and do not require drilling or permanent modification to the factory bumper or rocker panels. The installation method for the ID-01 Rear Spoiler and Performance Rear Diffuser should be confirmed with Bulletproof Automotive before fitting, as the source material does not specify the mounting method for these components within this kit.
Why does the Low-Line kit use the flat splitter and skirts rather than the winged TR87 variants? The flat design language is the defining characteristic of the Low-Line kit. The flat splitter and skirts prioritize clean integration with the G87’s factory bumper and sill lines, adding carbon presence and a more resolved lower body appearance without the extended winglet elements of the TR87 winged variants. For owners who prefer a measured OEM+ approach to the exterior rather than a full aero transformation, the flat components are the more appropriate choice.
Is the ID-01 Rear Spoiler the same component as the TREVORA ID-01 spoiler sold individually? The ID-01 Rear Spoiler in the Low-Line kit shares the same design designation as the TREVORA ID-01 spoiler in the G87 M2 lineup. It adds a subtle rear-end definition to the boot lid with a clean, low-profile design that complements the flat aesthetic of the splitter and skirts. Contact Bulletproof Automotive to confirm exact specifications if needed.
Can I upgrade from the Low-Line kit to the full TR87 program later? Yes. The TR87 winged front splitter, winged side skirts, front grilles, front air ducts, front bumper centre trim, rear bumper winglets, and TR87 rear wing are all available as individual purchases within the TREVORA G87 M2 lineup. Owners who start with the Low-Line kit and later want to build toward the full TR87 program can do so by adding individual components. The Performance Rear Diffuser and ID-01 Rear Spoiler included in the Low-Line kit remain compatible with the broader TR87 package.

About Trevora

Trevora (formerly TRE) is a UK-based automotive aero and styling brand specializing in high-performance pre-preg carbon fiber components. Founded in 2018, Trevora has grown into a globally recognized name in BMW aftermarket parts, known for its OEM+ philosophy, precision engineering, and uncompromising attention to detail. Every component is designed, engineered, and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. By utilizing autoclave-cured pre-preg carbon fiber, Trevora delivers a superior strength-to-weight ratio while eliminating inconsistencies found in traditional wet-lay carbon. All products are backed by Trevora’s industry-leading 5-year warranty.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.