Trevora TR87 V2 Flat Mount Carbon Rear Wing for BMW Vehicles

The TR87 V2 is a departure from vehicle-specific rear wings. Rather than being engineered for a single platform, the flat-bottom aluminum leg design is purpose-built for any car with a flat rear boot lid surface, making the TR87 V2 applicable across a wide range of platforms including multiple BMW generations and any other vehicle whose trunk geometry meets this requirement. The flat-bottom leg profile is what distinguishes this wing from curved-lid applications; on a flat surface, the legs sit flush and transfer load evenly, which is a prerequisite for a properly functioning rear wing mounting regardless of the aerodynamic setting chosen. The three-position adjustable rake system is the defining performance feature of the TR87 V2. Road configuration reduces drag for daily use while providing moderate rear downforce at speed. Sport configuration steps up the angle for increased downforce on more spirited driving and track days where some drag penalty is acceptable. Track configuration maximizes the wing angle for the highest downforce output, suited to circuit use where aerodynamic balance takes priority over drag efficiency. Adjustment is made at the aluminum leg mounts before final tightening; no permanent modification to the wing or vehicle is required to change between settings.

Carbon Fiber Construction

• Constructed using high-quality autoclave-cured pre-preg carbon fiber for superior strength-to-weight ratio. Each component is engineered and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. A UV-resistant clear coat protects the clean weave pattern and maintains finish quality over time, ensuring long-term durability in both daily driving and high-performance environments.

Features

• 2×2 twill pre-preg carbon fiber wing blade with high-gloss finish
• Flat-bottom aluminum wing legs engineered for flat rear boot lid surfaces
• Three adjustable rake settings: Road, Sport, and Track; set at the aluminum leg mounts
• No permanent modification to the rake setting required when switching between configurations
• Applicable to any vehicle with a flat rear boot lid, including multiple BMW generations and non-BMW platforms
• Mounting via four fixing bolts through the boot lid surface
• Backed by Trevora’s industry-leading 5-year warranty

Included in Box

• Carbon Rear Wing – Flat Trunk Mount
• Required mounting hardware
• Installation instructions

Applications

• BMW 1M: E82 | 2011-2012
• BMW M2: F87 | 2016-2018
• BMW M2 Competition: F87 | 2018-2021
• BMW M3: E30. E36, E46, E90, E92, E93, F80 | 1986-2018
• BMW M4: F82, F83 | 2014-2020

Frequently Asked Questions

• Is the TREVORA TR87 V2 wing compatible with my vehicle? The TR87 V2 is compatible with any vehicle featuring a flat rear boot lid surface. It is not compatible with curved or decklid-style trunk surfaces where the flat-bottom aluminum legs cannot sit flush. Listed BMW applications include the 1M E82, F87 M2 and M2 Competition, E30 / E36 / E46 / E90 / E92 M3, F80 M3, and F82 / F83 M4. It is also applicable to any other vehicle with a flat rear boot lid, including non-BMW platforms. If you are unsure whether your vehicle has a flat boot lid, contact Bulletproof Automotive before purchasing.
• Does installation require drilling through the boot lid? Yes. The TR87 V2 mounts via four fixing bolts through the rear boot lid surface, which requires drilling four holes. This is a permanent modification to the vehicle and cannot be reversed without repair to the boot lid. Professional installation is strongly recommended to ensure correct hole placement, even load distribution across all four fixing points, and proper torque at the leg hardware.
• What are the three rake settings and when should each be used? The TR87 V2 offers three adjustable rake configurations. Road setting reduces the wing angle for daily driving, minimizing aerodynamic drag while providing moderate rear downforce at speed. Sport setting increases the angle for more pronounced downforce suited to spirited driving and track days where some additional drag is acceptable. Track setting maximizes the wing angle for the highest downforce output, suited to circuit use where aerodynamic balance is the priority. Adjustment is made at the aluminum leg mounts before final tightening and can be changed between settings by loosening and resetting the leg hardware.
• Why does the TR87 V2 use flat-bottom aluminum legs rather than a standard leg design? Flat-bottom aluminum legs are required for correct mounting on a flat rear boot lid surface. On a flat surface, the leg base needs to sit fully flush to distribute the load of the wing evenly across the mounting points. Standard curved leg profiles designed for decklid-style trunks would not achieve flush contact on a flat lid, compromising both the mounting integrity and the aerodynamic performance of the wing.
• Who developed the TREVORA TR87 V2 and where is it made? The TREVORA TR87 V2 Carbon Rear Wing was developed in the United Kingdom by TREVORA in collaboration with AUTOID. It is constructed from 2×2 twill pre-preg carbon fiber and the aluminum leg components, with the design program led by TREVORA and developed under the AUTOID collaboration.
• Can the rake setting be changed after the wing is installed? Yes. The rake setting is adjusted at the aluminum leg mounts and can be changed by loosening the leg hardware, repositioning to the desired rake setting, and re-tightening. The adjustment does not require removal of the wing from the boot lid. Rake adjustment should always be completed before final tightening to ensure the wing is correctly set in the intended configuration.

About Trevora

Trevora (formerly TRE) is a UK-based automotive aero and styling brand specializing in high-performance pre-preg carbon fiber components. Founded in 2018, Trevora has grown into a globally recognized name in BMW aftermarket parts, known for its OEM+ philosophy, precision engineering, and uncompromising attention to detail. Every component is designed, engineered, and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. By utilizing autoclave-cured pre-preg carbon fiber, Trevora delivers a superior strength-to-weight ratio while eliminating inconsistencies found in traditional wet-lay carbon. All products are backed by Trevora’s industry-leading 5-year warranty.