What vehicles is the TREVORA F87 M2 OG splitter compatible with?

The TREVORA F87 M2 OG Pre-preg Carbon Front Splitter is engineered specifically for the original BMW M2 F87 with the N55 engine. It is designed for the N55 factory front bumper configuration only and is not compatible with the F87 M2 Competition, which uses the S55 engine and a different front bumper.

Why is this splitter not compatible with the F87 M2 Competition?

The F87 M2 OG with the N55 engine and the F87 M2 Competition with the S55 engine use different front bumpers with different lower fascia geometries. The TREVORA OG splitter is CAD-engineered to the dimensional requirements of the N55 OG bumper specifically; fitting it to the Competition bumper would result in incorrect alignment, poor fitment, and potentially no usable attachment points. Buyers with an F87 M2 Competition should confirm whether a separate Competition-specific splitter is available from TREVORA before purchasing.

What is the integrated winglet design and what does it do?

The winglets are integrated styling elements built into the outer edges of the splitter that follow the curvature of the F87 OG front bumper and extend the lower lip with a motorsport-influenced form. Visually, they add aggression at the front corners without introducing a design element that departs from the M Performance character of the car. Functionally, the winglet geometry helps to direct airflow more efficiently at the lower bumper, improving the aerodynamic profile of the front end compared to a flat lip extension.

Does the splitter require any drilling or permanent modification to the bumper?

The source material confirms the splitter uses pre-applied 3M double-sided tape and included installation hardware for installation. Professional installation is recommended to ensure correct adhesion and alignment. The 3M tape is a permanent adhesive system and removal after full cure should be approached carefully to avoid affecting the bumper paint or surface finish.

What is pre-preg carbon fiber and why does it matter on a splitter with integrated winglets?

Pre-preg carbon fiber is manufactured by pre-impregnating the carbon fabric with a precisely controlled resin ratio before the component is formed and cured. This produces consistent weave alignment and a high-quality surface finish across the full panel. On a splitter with integrated winglet sections, maintaining consistent resin distribution across both the flat main body and the curved winglet geometry is more demanding than on a simple flat panel; pre-preg construction ensures the finish quality holds throughout the full form of the component.

Is the TREVORA F87 M2 OG splitter part of a broader aero program for the F87?

The splitter is designed and developed in the United Kingdom as part of TREVORA's approach to premium, performance-driven components for enthusiast vehicles. For specific information about additional F87-compatible TREVORA components, contact Bulletproof Automotive.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Trevora Carbon Front Splitter for F87 BMW M2

The original F87 M2 with the N55 engine occupies a particular place in the M2 lineage; it is the naturally aspirated predecessor to the Competition, with its own distinct bumper geometry and front-end proportions that differ meaningfully from the S55 Competition model. The TREVORA OG splitter is built for this specific front bumper, with fitment developed through advanced CAD modeling to the N55 variant’s dimensional requirements rather than adapted from a Competition or G87 application. The outer edges of the splitter incorporate integrated winglet styling that follows the curvature of the F87 OG front bumper, extending the lower lip with a motorsport-inspired form that adds visual aggression without departing from the M Performance design language the car was built around. The winglets contribute to improved aerodynamic performance by directing airflow more efficiently at the lower bumper, working with the aerodynamic profile of the front end rather than simply extending it downward as a flat lip would.

Carbon Fiber Construction

Constructed using high-quality autoclave-cured pre-preg carbon fiber for superior strength-to-weight ratio. Each component is engineered and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. A UV-resistant clear coat protects the clean weave pattern and maintains finish quality over time, ensuring long-term durability in both daily driving and high-performance environments.

Features

2×2 twill pre-preg carbon fiber construction with high-quality surface finish
Integrated winglet styling at outer edges following the F87 OG bumper curvature
Improves lower bumper airflow management alongside front-end visual enhancement
CAD-engineered for precise fitment to the F87 M2 OG N55 factory front bumper
Pre-applied 3M double-sided tape and installation hardware included
OEM+ aesthetic designed to complement BMW M Performance design language
Backed by Trevora’s industry-leading 5-year warranty

Included in Box

Carbon Front Splitter
Required mounting hardware
Installation instructions

Applications

BMW M2: F87 | 2016-2021

Notes

Not compatible with the F87 M2 Competition S55 bumper

Frequently Asked Questions

What vehicles is the TREVORA F87 M2 OG splitter compatible with? The TREVORA F87 M2 OG Pre-preg Carbon Front Splitter is engineered specifically for the original BMW M2 F87 with the N55 engine. It is designed for the N55 factory front bumper configuration only and is not compatible with the F87 M2 Competition, which uses the S55 engine and a different front bumper.
Why is this splitter not compatible with the F87 M2 Competition? The F87 M2 OG with the N55 engine and the F87 M2 Competition with the S55 engine use different front bumpers with different lower fascia geometries. The TREVORA OG splitter is CAD-engineered to the dimensional requirements of the N55 OG bumper specifically; fitting it to the Competition bumper would result in incorrect alignment, poor fitment, and potentially no usable attachment points. Buyers with an F87 M2 Competition should confirm whether a separate Competition-specific splitter is available from TREVORA before purchasing.
What is the integrated winglet design and what does it do? The winglets are integrated styling elements built into the outer edges of the splitter that follow the curvature of the F87 OG front bumper and extend the lower lip with a motorsport-influenced form. Visually, they add aggression at the front corners without introducing a design element that departs from the M Performance character of the car. Functionally, the winglet geometry helps to direct airflow more efficiently at the lower bumper, improving the aerodynamic profile of the front end compared to a flat lip extension.
Does the splitter require any drilling or permanent modification to the bumper? The source material confirms the splitter uses pre-applied 3M double-sided tape and included installation hardware for installation. Professional installation is recommended to ensure correct adhesion and alignment. The 3M tape is a permanent adhesive system and removal after full cure should be approached carefully to avoid affecting the bumper paint or surface finish.
What is pre-preg carbon fiber and why does it matter on a splitter with integrated winglets? Pre-preg carbon fiber is manufactured by pre-impregnating the carbon fabric with a precisely controlled resin ratio before the component is formed and cured. This produces consistent weave alignment and a high-quality surface finish across the full panel. On a splitter with integrated winglet sections, maintaining consistent resin distribution across both the flat main body and the curved winglet geometry is more demanding than on a simple flat panel; pre-preg construction ensures the finish quality holds throughout the full form of the component.
Is the TREVORA F87 M2 OG splitter part of a broader aero program for the F87? The splitter is designed and developed in the United Kingdom as part of TREVORA’s approach to premium, performance-driven components for enthusiast vehicles. For specific information about additional F87-compatible TREVORA components, contact Bulletproof Automotive.

About Trevora

Trevora (formerly TRE) is a UK-based automotive aero and styling brand specializing in high-performance pre-preg carbon fiber components. Founded in 2018, Trevora has grown into a globally recognized name in BMW aftermarket parts, known for its OEM+ philosophy, precision engineering, and uncompromising attention to detail. Every component is designed, engineered, and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. By utilizing autoclave-cured pre-preg carbon fiber, Trevora delivers a superior strength-to-weight ratio while eliminating inconsistencies found in traditional wet-lay carbon. All products are backed by Trevora’s industry-leading 5-year warranty.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.