What vehicles is the TREVORA PR-1 front splitter compatible with?

The TREVORA PR-1 Carbon Fiber Front Splitter is designed specifically for the 2024 and newer BMW M5 Sedan G90 and the 2024 and newer BMW M5 Touring G99. Fitment on the G60 5 Series or other BMW models is not confirmed, as the splitter is engineered to the specific front bumper proportions and cooling inlet geometry of the M5 platform.

How does the three-piece design benefit fitment and long-term ownership?

The three-piece construction allows each section of the splitter to align independently with the G90 and G99 front bumper geometry, resulting in more precise fitment than a single-piece design across the full width of the bumper. It also means that if one section sustains damage from road debris or a kerb strike, only that section needs to be replaced rather than the entire assembly, which reduces long-term repair costs.

Does the central section affect how the factory cooling system works?

The central section of the PR-1 is specifically shaped to direct airflow toward the factory cooling inlets rather than reducing or blocking it. The design works with the factory bumper geometry to maintain and improve the efficiency of airflow to the front radiators. Any aftermarket modification to the factory bumper or cooling system should be assessed for compatibility before installation.

Does the PR-1 front splitter require drilling or permanent modification?

No. The PR-1 front splitter uses pre-applied 3M automotive-grade tape combined with included assembly hardware for installation. No drilling or permanent modification to the factory front bumper is required. The surface must be thoroughly cleaned and degreased before fitting, and the adhesive should cure fully before driving.

Why is pre-preg carbon fiber specified for this splitter?

Pre-preg carbon fiber controls resin distribution precisely during manufacturing, producing a void-free structure with consistent weave alignment and a high-gloss OEM-level surface finish. On a front splitter that spans the full width of the M5 bumper and is viewed head-on, surface consistency and finish quality across all three sections are directly visible. The void-free construction also provides better structural integrity than wet layup alternatives, which matters on a component in this position that is exposed to road debris and airflow pressure at speed.

Is the PR-1 front splitter suitable for both the G90 Sedan and G99 Touring?

Yes. The TREVORA PR-1 front splitter is compatible with both the G90 M5 Sedan and the G99 M5 Touring. Both models share the same front bumper architecture, and the splitter is engineered for precise fitment across both body styles.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Trevora Carbon PR-1 Front Splitter for G9x BMW M5

The TREVORA PR-1 Carbon Fiber Front Splitter is a three-piece aero component designed specifically for the 2024+ BMW G90 M5 Sedan and G99 M5 Touring, built from premium pre-preg carbon fiber to add a more assertive front-end profile while contributing to airflow management toward the factory cooling inlets. Engineered for precise fitment with the M5 front bumper and installed using pre-applied 3M automotive-grade tape and included hardware, the PR-1 delivers a functional and visual upgrade to the front end with no permanent modification to the factory bumper required.

Carbon Fiber Construction

Constructed using high-quality autoclave-cured pre-preg carbon fiber for superior strength-to-weight ratio. Each component is engineered and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. A UV-resistant clear coat protects the clean weave pattern and maintains finish quality over time, ensuring long-term durability in both daily driving and high-performance environments.

Features

Central section specifically shaped to direct airflow toward factory cooling inlets
Outer sections extend front-end visual depth and add a more defined performance-oriented lower profile
Pre-preg carbon fiber construction for void-free build, consistent high-gloss OEM-level finish, and lightweight strength
Pre-applied 3M automotive-grade tape and included assembly hardware for clean installation
No drilling or permanent modification to the factory front bumper required
Three-piece format allows individual section replacement if one section is damaged
Backed by Trevora’s industry-leading 5-year warranty

Included in Box

Carbon Fiber PR-1 Front Splitter
Required mounting hardware
Installation instructions

Applications

BMW M5: G90, G99 | 2024-present

Frequently Asked Question

What vehicles is the TREVORA PR-1 front splitter compatible with? The TREVORA PR-1 Carbon Fiber Front Splitter is designed specifically for the 2024 and newer BMW M5 Sedan G90 and the 2024 and newer BMW M5 Touring G99. Fitment on the G60 5 Series or other BMW models is not confirmed, as the splitter is engineered to the specific front bumper proportions and cooling inlet geometry of the M5 platform.
How does the three-piece design benefit fitment and long-term ownership? The three-piece construction allows each section of the splitter to align independently with the G90 and G99 front bumper geometry, resulting in more precise fitment than a single-piece design across the full width of the bumper. It also means that if one section sustains damage from road debris or a kerb strike, only that section needs to be replaced rather than the entire assembly, which reduces long-term repair costs.
Does the central section affect how the factory cooling system works? The central section of the PR-1 is specifically shaped to direct airflow toward the factory cooling inlets rather than reducing or blocking it. The design works with the factory bumper geometry to maintain and improve the efficiency of airflow to the front radiators. Any aftermarket modification to the factory bumper or cooling system should be assessed for compatibility before installation.
Does the PR-1 front splitter require drilling or permanent modification? No. The PR-1 front splitter uses pre-applied 3M automotive-grade tape combined with included assembly hardware for installation. No drilling or permanent modification to the factory front bumper is required. The surface must be thoroughly cleaned and degreased before fitting, and the adhesive should cure fully before driving.
Why is pre-preg carbon fiber specified for this splitter? Pre-preg carbon fiber controls resin distribution precisely during manufacturing, producing a void-free structure with consistent weave alignment and a high-gloss OEM-level surface finish. On a front splitter that spans the full width of the M5 bumper and is viewed head-on, surface consistency and finish quality across all three sections are directly visible. The void-free construction also provides better structural integrity than wet layup alternatives, which matters on a component in this position that is exposed to road debris and airflow pressure at speed.
Is the PR-1 front splitter suitable for both the G90 Sedan and G99 Touring? Yes. The TREVORA PR-1 front splitter is compatible with both the G90 M5 Sedan and the G99 M5 Touring. Both models share the same front bumper architecture, and the splitter is engineered for precise fitment across both body styles.

About Trevora

Trevora (formerly TRE) is a UK-based automotive aero and styling brand specializing in high-performance pre-preg carbon fiber components. Founded in 2018, Trevora has grown into a globally recognized name in BMW aftermarket parts, known for its OEM+ philosophy, precision engineering, and uncompromising attention to detail. Every component is designed, engineered, and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. By utilizing autoclave-cured pre-preg carbon fiber, Trevora delivers a superior strength-to-weight ratio while eliminating inconsistencies found in traditional wet-lay carbon. All products are backed by Trevora’s industry-leading 5-year warranty.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.