What vehicles is the TREVORA TR87 flat front splitter compatible with?

The TREVORA TR87 Carbon Flat Front Splitter is designed specifically for the 2023 and newer BMW M2 G87. It is not confirmed for fitment on earlier M2 generations or other BMW models.

What is the difference between the TR87 flat splitter and the TR87 splitter with winglets?

Both versions share the same 3-piece modular construction, 2x2 twill pre-preg carbon fiber build, and advanced CAD-developed fitment for the G87 M2 front bumper. The difference is the front-end configuration; the flat splitter offers a cleaner, more understated fast-road appearance without additional winglet detailing, while the winglet-equipped version adds a more pronounced motorsport aesthetic with extended side winglets. The flat version suits owners who want OEM+ presence with a factory-integrated look; the winglet version suits those pushing toward a more aggressive front-end transformation.

What is the advantage of the 3-piece modular design?

The 3-piece construction allows each section of the splitter to be installed with greater precision and, critically, replaced individually if damaged. A single kerb strike or debris impact to one section does not require replacing the entire assembly; TREVORA offers individual replacement sections specifically for this reason. This significantly reduces long-term repair costs compared to a one-piece splitter where any damage to any part of the panel requires a full replacement.

Are replacement sections available if part of the splitter is damaged?

Yes. TREVORA offers individual replacement sections for the TR87 splitter system. If one section sustains damage, contact Bulletproof Automotive to source the specific section needed rather than replacing the full assembly.

Does the TR87 flat splitter require any cutting or modification to the factory bumper?

The source material does not specify an adhesive or hardware installation method for this product beyond confirming it uses advanced CAD development for precise fitment with the factory bumper. Professional installation is recommended; contact Bulletproof Automotive for specific installation guidance before purchase.

What is pre-preg carbon fiber and why does it matter on a front splitter?

Pre-preg carbon fiber is manufactured by pre-impregnating the carbon fabric with a precisely controlled resin ratio before the component is formed and cured. This produces a tighter, more uniform 2x2 twill weave and a higher-quality surface finish compared to wet layup carbon, where resin is applied manually and consistency across a panel is harder to maintain. On a front splitter that spans the full width of the bumper and is viewed head-on, weave consistency and surface finish quality across all three sections are directly visible; pre-preg construction ensures both.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Trevora TR87 Carbon Flat Front Splitter for G87 BMW M2

The TREVORA TR87 Carbon Flat Front Splitter is a purposeful OEM+ aero upgrade for the 2023+ BMW G87 M2, built around a clean flat configuration that sharpens the lower front fascia without the additional visual weight of winglets. Developed in the United Kingdom from premium 2×2 twill pre-preg carbon fiber using advanced CAD methods, the splitter integrates directly with the G87 M2 front bumper for a planted, more aggressive stance that stays firmly within the factory design language. A 3-piece modular construction allows individual sections to be replaced if damaged, keeping long-term ownership costs lower than a one-piece alternative.

Carbon Fiber Construction

Constructed using high-quality autoclave-cured pre-preg carbon fiber for superior strength-to-weight ratio. Each component is engineered and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. A UV-resistant clear coat protects the clean weave pattern and maintains finish quality over time, ensuring long-term durability in both daily driving and high-performance environments.

Features

Flat configuration delivers a clean, fast-road-inspired OEM+ front-end appearance
2×2 twill pre-preg carbon fiber construction for consistent weave, high-end surface finish, and lightweight strength
3-piece modular construction for improved installation precision and individual section serviceability
Engineered using advanced CAD for precise OEM-level fitment with the G87 M2 factory front bumper
Plug-and-play installation
Backed by Trevora’s industry-leading 5-year warranty

Included in Box

Carbon Flat Front Splitter
Required mounting hardware
Installation instructions

Applications

BMW M2: G87 | 2023-present

Frequently Asked Questions

What vehicles is the TREVORA TR87 flat front splitter compatible with? The TREVORA TR87 Carbon Flat Front Splitter is designed specifically for the 2023 and newer BMW M2 G87. It is not confirmed for fitment on earlier M2 generations or other BMW models.
What is the difference between the TR87 flat splitter and the TR87 splitter with winglets? Both versions share the same 3-piece modular construction, 2×2 twill pre-preg carbon fiber build, and advanced CAD-developed fitment for the G87 M2 front bumper. The difference is the front-end configuration; the flat splitter offers a cleaner, more understated fast-road appearance without additional winglet detailing, while the winglet-equipped version adds a more pronounced motorsport aesthetic with extended side winglets. The flat version suits owners who want OEM+ presence with a factory-integrated look; the winglet version suits those pushing toward a more aggressive front-end transformation.
What is the advantage of the 3-piece modular design? The 3-piece construction allows each section of the splitter to be installed with greater precision and, critically, replaced individually if damaged. A single kerb strike or debris impact to one section does not require replacing the entire assembly; TREVORA offers individual replacement sections specifically for this reason. This significantly reduces long-term repair costs compared to a one-piece splitter where any damage to any part of the panel requires a full replacement.
Are replacement sections available if part of the splitter is damaged? Yes. TREVORA offers individual replacement sections for the TR87 splitter system. If one section sustains damage, contact Bulletproof Automotive to source the specific section needed rather than replacing the full assembly.
Does the TR87 flat splitter require any cutting or modification to the factory bumper? The source material does not specify an adhesive or hardware installation method for this product beyond confirming it uses advanced CAD development for precise fitment with the factory bumper. Professional installation is recommended; contact Bulletproof Automotive for specific installation guidance before purchase.
What is pre-preg carbon fiber and why does it matter on a front splitter? Pre-preg carbon fiber is manufactured by pre-impregnating the carbon fabric with a precisely controlled resin ratio before the component is formed and cured. This produces a tighter, more uniform 2×2 twill weave and a higher-quality surface finish compared to wet layup carbon, where resin is applied manually and consistency across a panel is harder to maintain. On a front splitter that spans the full width of the bumper and is viewed head-on, weave consistency and surface finish quality across all three sections are directly visible; pre-preg construction ensures both.

About Trevora

Trevora (formerly TRE) is a UK-based automotive aero and styling brand specializing in high-performance pre-preg carbon fiber components. Founded in 2018, Trevora has grown into a globally recognized name in BMW aftermarket parts, known for its OEM+ philosophy, precision engineering, and uncompromising attention to detail. Every component is designed, engineered, and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. By utilizing autoclave-cured pre-preg carbon fiber, Trevora delivers a superior strength-to-weight ratio while eliminating inconsistencies found in traditional wet-lay carbon. All products are backed by Trevora’s industry-leading 5-year warranty.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.