What BMW models is the TREVORA G42 front splitter compatible with?

The TREVORA Carbon Fiber Front Splitter is designed for the BMW G42 2 Series in M Sport trim and the G42 M240i. It is not confirmed for fitment on non-M Sport G42 variants, as the front bumper configuration differs between trim levels.

Does the splitter require drilling or permanent modification to the bumper?

No. The TREVORA G42 front splitter uses the factory OEM mounting points along with included hardware and pre-applied 3M adhesive for installation. No drilling or permanent modification to the factory bumper is required. The bumper surface must be thoroughly cleaned before fitting to ensure a secure and lasting bond.

What does the one-piece full-length design offer over a shorter or sectioned splitter?

A full-length one-piece splitter runs the complete width of the front bumper from corner to corner, creating a clean, uninterrupted lower lip line that reinforces the full width of the car. Sectioned or shorter designs leave gaps or visible transitions that can undermine the overall look. The one-piece construction also provides a structurally consistent panel with no join points that could flex or separate over time.

What is the GTS-style design inspiration behind this splitter?

GTS-style aero refers to the aerodynamic design language associated with GT and touring car motorsport, characterized by defined central sections, side lip extensions, and a lower splitter that adds visual and functional presence to the front end. On the G42, the TREVORA splitter applies these elements in a manner scaled to the car's proportions, adding the depth and definition of race-influenced styling while keeping the overall appearance within OEM+ boundaries.

What is pre-preg carbon fiber and why is it used on a full-length splitter?

Pre-preg carbon fiber is manufactured by pre-impregnating the carbon fabric with a controlled resin ratio before the component is formed and cured. This produces a more uniform 2x2 weave pattern and a higher-quality surface finish than wet layup carbon, where resin is applied by hand and consistency across a large panel is harder to maintain. On a full-length splitter that spans the entire width of the front bumper, weave consistency and surface finish across the full panel are directly visible; pre-preg construction ensures both.

How long does installation take and what is included?

Installation time will vary depending on experience and preparation, but the process is designed to be straightforward. The splitter uses factory OEM mounting points and comes with all necessary hardware, pre-applied 3M adhesive, and an adhesive promoter. Thorough surface preparation is the most time-sensitive part of the process; the adhesive needs a clean, degreased surface to bond correctly and the cure time should be respected before driving.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Trevora Carbon Front Splitter for G42 BMW 2 Series

The TREVORA Carbon Fiber Front Splitter is a full-length, one-piece aero upgrade developed in the United Kingdom specifically for the BMW G42 2 Series M Sport and M240i, delivering GTS-inspired front-end definition with OEM-level integration. Constructed from premium 2×2 pre-preg carbon fiber with pre-applied 3M adhesive and included mounting hardware, the splitter installs using factory mounting points for a clean, secure fit that maintains proper alignment across the full bumper width.

Carbon Fiber Construction

Constructed using high-quality autoclave-cured pre-preg carbon fiber for superior strength-to-weight ratio. Each component is engineered and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. A UV-resistant clear coat protects the clean weave pattern and maintains finish quality over time, ensuring long-term durability in both daily driving and high-performance environments.

Features

GTS-inspired styling with subtle side lip extensions and defined central edges
2×2 pre-preg carbon fiber construction for consistent high-gloss finish, lightweight performance, and long-term durability
OEM mounting point compatibility for precise, aligned fitment
Pre-applied 3M adhesive and included adhesive promoter for bonding installation
Mounting hardware included; no drilling or bumper modification required
Fits BMW G42 2 Series M Sport models and M240i
Backed by Trevora’s industry-leading 5-year warranty

Included in Box

Carbon Fiber Front Splitter
Required mounting hardware
Installation instructions

Applications

BMW 220i M Sport: G42 | 2021-present
BMW 230i M Sport: G42 | 2021-present
BMW M240i: G42 | 2021-present

Frequently Asked Questions

What BMW models is the TREVORA G42 front splitter compatible with? The TREVORA Carbon Fiber Front Splitter is designed for the BMW G42 2 Series in M Sport trim and the G42 M240i. It is not confirmed for fitment on non-M Sport G42 variants, as the front bumper configuration differs between trim levels.
Does the splitter require drilling or permanent modification to the bumper? No. The TREVORA G42 front splitter uses the factory OEM mounting points along with included hardware and pre-applied 3M adhesive for installation. No drilling or permanent modification to the factory bumper is required. The bumper surface must be thoroughly cleaned before fitting to ensure a secure and lasting bond.
What does the one-piece full-length design offer over a shorter or sectioned splitter? A full-length one-piece splitter runs the complete width of the front bumper from corner to corner, creating a clean, uninterrupted lower lip line that reinforces the full width of the car. Sectioned or shorter designs leave gaps or visible transitions that can undermine the overall look. The one-piece construction also provides a structurally consistent panel with no join points that could flex or separate over time.
What is the GTS-style design inspiration behind this splitter? GTS-style aero refers to the aerodynamic design language associated with GT and touring car motorsport, characterized by defined central sections, side lip extensions, and a lower splitter that adds visual and functional presence to the front end. On the G42, the TREVORA splitter applies these elements in a manner scaled to the car’s proportions, adding the depth and definition of race-influenced styling while keeping the overall appearance within OEM+ boundaries.
What is pre-preg carbon fiber and why is it used on a full-length splitter? Pre-preg carbon fiber is manufactured by pre-impregnating the carbon fabric with a controlled resin ratio before the component is formed and cured. This produces a more uniform 2×2 weave pattern and a higher-quality surface finish than wet layup carbon, where resin is applied by hand and consistency across a large panel is harder to maintain. On a full-length splitter that spans the entire width of the front bumper, weave consistency and surface finish across the full panel are directly visible; pre-preg construction ensures both.
How long does installation take and what is included? Installation time will vary depending on experience and preparation, but the process is designed to be straightforward. The splitter uses factory OEM mounting points and comes with all necessary hardware, pre-applied 3M adhesive, and an adhesive promoter. Thorough surface preparation is the most time-sensitive part of the process; the adhesive needs a clean, degreased surface to bond correctly and the cure time should be respected before driving.

About Trevora

Trevora (formerly TRE) is a UK-based automotive aero and styling brand specializing in high-performance pre-preg carbon fiber components. Founded in 2018, Trevora has grown into a globally recognized name in BMW aftermarket parts, known for its OEM+ philosophy, precision engineering, and uncompromising attention to detail. Every component is designed, engineered, and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. By utilizing autoclave-cured pre-preg carbon fiber, Trevora delivers a superior strength-to-weight ratio while eliminating inconsistencies found in traditional wet-lay carbon. All products are backed by Trevora’s industry-leading 5-year warranty.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Trevora Carbon Front Splitter for G42 BMW 2 Series [TR-BG42ID01FSCF]

Guaranteed Safe Checkout