Trevora G87 M2 Carbon Front Splitter with Winglets

The front splitter is the most visually impactful aero component on the G87 M2’s front end, and the TREVORA approach here is to maximize that impact while keeping the overall execution clean and cohesive. The winglet configuration runs alongside the main splitter body, extending the horizontal visual line of the front bumper and reinforcing the wide, planted stance the M2 already projects from the factory. The result sits comfortably in OEM+ territory; more purposeful than stock, without crossing into the kind of overworked appearance that pulls the car away from its original intent. Construction uses premium pre-preg 2×2 twill carbon fiber throughout, the same manufacturing method used in aerospace and motorsport applications where a controlled resin ratio and consistent weave are non-negotiable. Pre-preg carbon produces a tighter, more uniform surface than wet layup alternatives, and on a component as front-and-center as a splitter, that consistency is visible from across the room. The lightweight and high-strength properties of the material mean the system adds presence without adding meaningful weight to the front of the car. One of the more practical aspects of this splitter is the 3-piece modular construction. Rather than a single bonded assembly, the system breaks into three separate sections that can be transported more easily, installed with greater precision, and, critically, replaced individually if one section is damaged. TREVORA offers replacement sections for exactly this reason, which keeps long-term ownership costs lower than a one-piece design where a single curb strike or track incident requires replacing the entire assembly

Carbon Fiber Construction

• Constructed using high-quality autoclave-cured pre-preg carbon fiber for superior strength-to-weight ratio. Each component is engineered and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. A UV-resistant clear coat protects the clean weave pattern and maintains finish quality over time, ensuring long-term durability in both daily driving and high-performance environments.

Features

• OEM+ fitment – engineered specifically for the listed BMW platform
• Pre-preg autoclave-cured carbon fiber construction
• UV-resistant clear coat finish
• Superior strength-to-weight ratio versus wet-lay carbon
• Direct OEM fitment
• Plug-and-play installation
• Backed by Trevora’s industry-leading 5-year warranty

Included in Box

• One set of Trevora G87 M2 Carbon Front Splitter with Winglets
• Required mounting hardware
• Installation instructions

Applications

• BMW M2: G87 | 2023-present

Frequently Asked Questions

• What BMW models is the TREVORA front splitter with winglets compatible with? The TREVORA carbon fiber front splitter with winglets is designed specifically for the 2023 and newer BMW M2 G87. It is not confirmed for fitment on earlier M2 generations or other BMW models.
• What is the advantage of the 3-piece modular design? The 3-piece construction offers three practical benefits over a single-piece splitter. It is easier to transport and handle during installation, allows for more precise alignment of each section to the factory bumper, and, most importantly, makes individual section replacement possible. If one part of the splitter is damaged, only that section needs to be replaced rather than the entire assembly, which reduces repair costs significantly over the life of the product.
• Are replacement sections available if part of the splitter is damaged? Yes. TREVORA offers individual replacement sections for this splitter system. In the event of damage to one section, contact Bulletproof Automotive to source the specific piece rather than replacing the full assembly.
• Does the splitter require drilling or permanent modification to the factory bumper? No. The TREVORA G87 M2 front splitter uses pre-applied 3M double-sided tape and an included adhesive promoter for installation. No drilling or permanent modification to the factory front bumper is required.
• What is pre-preg carbon fiber and how does it compare to standard carbon? Pre-preg carbon fiber is produced by pre-impregnating the carbon fiber fabric with a precisely measured amount of resin before the component is formed and cured. This process results in a more consistent weave pattern, better structural integrity, and a higher-quality surface finish than wet layup carbon fiber, where resin is applied manually during the layup process. Pre-preg is the method used in aerospace and motorsport manufacturing for these exact reasons.
• How does the winglet configuration change the look of the G87 M2? The winglets extend horizontally alongside the main splitter body, reinforcing the wide stance of the G87 M2’s front end and adding a motorsport-inspired detail that sharpens the overall front profile. The design draws from the factory contours of the bumper rather than imposing a separate shape, keeping the result in OEM+ territory; more aggressive than stock, but cohesive with the rest of the car.

About Trevora

Trevora (formerly TRE) is a UK-based automotive aero and styling brand specializing in high-performance pre-preg carbon fiber components. Founded in 2018, Trevora has grown into a globally recognized name in BMW aftermarket parts, known for its OEM+ philosophy, precision engineering, and uncompromising attention to detail. Every component is designed, engineered, and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. By utilizing autoclave-cured pre-preg carbon fiber, Trevora delivers a superior strength-to-weight ratio while eliminating inconsistencies found in traditional wet-lay carbon. All products are backed by Trevora’s industry-leading 5-year warranty.