Trevora G87 M2 Carbon ID-01 Rear Spoiler

The ID-01 is built around a sculpted curvature that wraps cleanly along the trunk edge, adding visual width and a more aggressive rear profile without overdoing the transformation. On the G87 M2, where the factory styling is already performance-focused, the spoiler integrates naturally and sharpens the lines the car already has. On the G42 2 Series, the effect is more pronounced, giving the rear end a performance-oriented presence that the standard model does not carry from the factory. Construction uses high-quality pre-preg carbon fiber in a 2×2 weave pattern, the same manufacturing process used in aerospace and motorsport applications where consistency, strength, and weight savings all matter. Pre-preg carbon produces a tighter, more uniform weave than wet layup methods, and the result here is a surface finish that holds up to OEM-level expectations across the full panel. The lightweight and high-strength properties of the material mean the spoiler adds presence without adding meaningful mass to the rear of the car.

Carbon Fiber Construction

• Constructed using high-quality autoclave-cured pre-preg carbon fiber for superior strength-to-weight ratio. Each component is engineered and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. A UV-resistant clear coat protects the clean weave pattern and maintains finish quality over time, ensuring long-term durability in both daily driving and high-performance environments.

Features

• OEM+ fitment – engineered specifically for the listed BMW platform
• Pre-preg autoclave-cured carbon fiber construction
• UV-resistant clear coat finish
• Superior strength-to-weight ratio versus wet-lay carbon
• Direct OEM fitment
• Plug-and-play installation
• Backed by Trevora’s industry-leading 5-year warranty

Included in Box

• Trevora G87 M2 Carbon ID-01 Rear Spoiler
• Required mounting hardware
• Installation instructions

Applications

• BMW M2: G87 | 2023-present

Frequently Asked Questions

• What BMW models is the TREVORA ID-01 spoiler compatible with? The TREVORA ID-01 carbon fiber rear spoiler is compatible with the 2023 and newer BMW M2 G87 and the 2022 and newer BMW 2 Series G42. It is not confirmed for fitment on other BMW models or earlier generation M2 and 2 Series platforms.
• Does the ID-01 spoiler require drilling or permanent modification to install? No. The TREVORA ID-01 uses pre-applied 3M double-sided tape and an included adhesive promoter for installation. No drilling or permanent modification to the trunk lid is required. The process takes approximately 30 minutes from preparation to completion.
• What is pre-preg carbon fiber and why does it matter? Pre-preg carbon fiber refers to carbon fiber fabric that has been pre-impregnated with a precisely controlled amount of resin before the manufacturing process. This method produces a tighter, more consistent weave pattern and superior strength-to-weight ratio compared to wet layup carbon fiber. It is the same process used in aerospace and motorsport manufacturing, and it results in a surface finish that meets OEM-level quality expectations.
• How long does the adhesive need to cure before driving? A minimum cure time of one hour is recommended after installation before driving the vehicle. Avoiding vehicle movement during this period allows the 3M adhesive and promoter to bond fully, which is critical for a lasting and secure fit.
• Does the ID-01 look factory on the G87 M2 and G42 2 Series? The ID-01 is specifically designed to integrate with the factory body lines of both the G87 M2 and G42 2 Series. Drawing inspiration from BMW’s own CS and M Performance styling, the spoiler follows the existing design language of both platforms rather than imposing a separate aesthetic. On the G87 M2 it sharpens the existing aggressive profile; on the G42 2 Series it adds a more performance-oriented character to the rear end.
• Where is the TREVORA ID-01 designed and manufactured? The TREVORA ID-01 is designed and developed in the United Kingdom. It is constructed using high-quality pre-preg carbon fiber with a 2×2 weave pattern, produced to OEM-level fitment and finish standards.

About Trevora

Trevora (formerly TRE) is a UK-based automotive aero and styling brand specializing in high-performance pre-preg carbon fiber components. Founded in 2018, Trevora has grown into a globally recognized name in BMW aftermarket parts, known for its OEM+ philosophy, precision engineering, and uncompromising attention to detail. Every component is designed, engineered, and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. By utilizing autoclave-cured pre-preg carbon fiber, Trevora delivers a superior strength-to-weight ratio while eliminating inconsistencies found in traditional wet-lay carbon. All products are backed by Trevora’s industry-leading 5-year warranty.