Is the 75RS Stainless Exhaust straight-through?

Yes. The 75RS Stainless Exhaust runs a fully straight-through layout with minimal restriction, moving from a 76.3mm center pipe into dual 60.5mm outlets through the main silencer, which lowers back pressure for rapid boost response and sustained top-end power.

What are the tailpipes made of?

The signature dolphin-style tailpipes are dual 120mm burnt titanium, the same motorsport signature J's Racing runs on its race cars, contrasting with the stainless main sections.

Is it certified for street noise regulations?

It carries JQR certification for acceleration noise regulations in Japan. US buyers should confirm local sound regulations, as standards vary by state and municipality.

What happens to the factory exhaust valve actuator?

The system includes a stock actuator relocation kit, so the factory actuator hardware transfers cleanly during installation with no improvisation required.

How heavy is the system?

The complete system weighs 18.5 kg, with lightweight stainless main sections and a titanium rear tail section keeping mass down versus comparable full-stainless designs.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

J’s Racing 75RS Stainless Exhaust System for FL5 Honda Civic Type R [X304W-L5-75RSL]

The J’s Racing 75RS Stainless Exhaust for the FL5 Honda Civic Type R was engineered to deliver maximum power while remaining within safety standards. The fully straight-through stainless design minimizes restriction and exhaust back pressure: a 76.3mm center pipe transitions into dual 60.5mm outlets through the main silencer, promoting rapid boost response and sustained power at higher rpm, and the system carries JQR certification for acceleration noise regulations in Japan.

Design and Performance

The system finishes with J’s Racing’s signature dolphin-style dual 120mm burnt titanium tailpipes, an aggressive motorsport signature that complements the FL5’s rear profile. Main sections are lightweight stainless steel with the rear tail section in titanium, bringing the complete system to 18.5 kg, and a stock actuator relocation kit is included so the factory hardware carries over cleanly.

Features

Dual 120mm burnt titanium dolphin-style tailpipes
Fully straight-through design lowers exhaust back pressure
JQR certified for acceleration noise regulations in Japan
Stainless steel main sections with a titanium rear tail section
Stock actuator relocation kit included

Specifications

Center Pipe: 76.3 mm
Outlets: dual 60.5 mm
Tailpipes: dual 120 mm burnt titanium, dolphin style
Material: Stainless steel main sections, titanium rear tail
System Weight: 18.5 kg
Certification: JQR (Japanese acceleration noise regulations)

Applications

Honda Civic Type R: FL5 | 2023-present | 2.0L K20C1 Turbo

Notes

Includes the stock actuator relocation kit
Made to order from J’s Racing in Japan; lead times apply
For sound clips and lead time details, contact us

Frequently Asked Questions

Is the 75RS Stainless Exhaust straight-through? Yes. The 75RS Stainless Exhaust runs a fully straight-through layout with minimal restriction, moving from a 76.3mm center pipe into dual 60.5mm outlets through the main silencer, which lowers back pressure for rapid boost response and sustained top-end power.
What are the tailpipes made of? The signature dolphin-style tailpipes are dual 120mm burnt titanium, the same motorsport signature J’s Racing runs on its race cars, contrasting with the stainless main sections.
Is it certified for street noise regulations? It carries JQR certification for acceleration noise regulations in Japan. US buyers should confirm local sound regulations, as standards vary by state and municipality.
What happens to the factory exhaust valve actuator? The system includes a stock actuator relocation kit, so the factory actuator hardware transfers cleanly during installation with no improvisation required.
How heavy is the system? The complete system weighs 18.5 kg, with lightweight stainless main sections and a titanium rear tail section keeping mass down versus comparable full-stainless designs.

About J’s Racing

J’s Racing is one of Japan’s most respected Honda tuning houses, developing parts the hard way: on real race tracks in Super Taikyu endurance competition and time attack rather than on paper. From aero and titanium exhausts to suspension and driveline components, every product carries lessons learned from decades of racing Hondas at the limit. Bulletproof Automotive imports J’s Racing parts directly from Japan, bringing authentic, race-proven JDM engineering to enthusiasts in the US and worldwide.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.