Which cars does the Eventuri Yellow Kevlar Intake System for the E9x BMW M3 fit?

It fits the S65-powered E9x M3 across all three body styles: the E90 sedan, E92 coupe, and E93 convertible, covering roughly 2008 through 2013. It is engineered specifically for the 4.0L S65 V8 and is not intended for the non-M 3 Series or any other engine.

How much power does the Kevlar intake add?

On the dyno the system gained 8 to 10 hp and 10 to 12 ft-lb, while road-dyno testing with Insoric recorded a 16 hp increase and 14 Nm of torque. Eventuri also measured a lower intake air temperature, 4.5C above ambient versus 7.5C on the stock setup, and a 0.3 second reduction in the 100 to 200 kph pull.

Does the intake keep the factory airbox, and how does it make power?

Yes. The E9x M3 already uses a well-designed stock airbox, so Eventuri retained it and replaced the restrictive inlet tube connecting the airbox to the inlet manifold. A carbon fiber scoop increases airflow through the airbox, letting the V8 breathe more efficiently while lowering intake temperatures for a genuine performance gain.

What comes in the box and what is the intake tube made from?

The kit includes a carbon Kevlar intake tube, a high-flow urethane cone filter, a carbon fiber inlet scoop, a CNC-machined breather adapter, a laser-cut stainless steel debris guard, and a silicone coupler with OEM-specification clamps. The signature yellow Kevlar tube is chosen for strength and optimized airflow.

Is installation difficult, and can the intake be returned?

Installation is a direct-fit, bolt-on job that uses the retained factory airbox and OEM-specification clamps, so no major modifications are required. Note that this item is not eligible for return, so confirm your E90, E92, or E93 M3 application and the yellow Kevlar finish before ordering.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Eventuri Yellow Kevlar Intake System for E9x BMW M3

The Eventuri Yellow Kevlar Intake System for E9x BMW M3 is a premium performance intake engineered specifically for the S65-powered E9x M3, designed to improve airflow and engine efficiency while enhancing throttle response and sound. Featuring a reinforced yellow Kevlar intake tube, high-flow air filter, and precision-matched components that optimize the stock airbox architecture, this system delivers cooler, higher-volume air to the engine for improved power and torque throughout the rev range. Built with lightweight, high-quality materials and engineered for a direct, bolt-on fit, it offers enthusiasts a noticeable performance upgrade with refined induction sound and reliable daily drive usability.

Features

Reinforced yellow Kevlar intake tube for strength and optimized airflow
High-flow performance air filter for increased air volume
Improves throttle response, power delivery, and torque
Cooler intake air for better performance and efficiency
Precision-engineered components for smooth airflow transitions
Distinctive, enhanced induction sound
Direct-fit, bolt-on installation with no major modifications required
Lightweight, high-quality materials for durability and long-term use

Specifications

Performance Gain Dyno: 8-10hp, 10-12ft-lb
Performance Gain Road Dyno (Insoric): 16hp, 14Nm
IAT Difference with Ambient:
- Stock: 7.5C
- Eventuri: 4.5C
V-Box Acceleration : 100-200kph Reduced By 0.3 Seconds

What’s Included

Carbon Kevlar Intake Tube
High Flow Urethane Cone Filter
Carbon Fibre inlet Scoop
CNC Machined breather adapter
Laser Cut Stainless Steel Debris Guard
Silicon Coupler and OEM specification clamps

Applications

BMW M3: E90, E92, E93 | 2008-2013 | S65 4.oL V8

Notes

This item is not eligible for return

Frequently Asked Questions

Which cars does the Eventuri Yellow Kevlar Intake System for the E9x BMW M3 fit? It fits the S65-powered E9x M3 across all three body styles: the E90 sedan, E92 coupe, and E93 convertible, covering roughly 2008 through 2013. It is engineered specifically for the 4.0L S65 V8 and is not intended for the non-M 3 Series or any other engine.
How much power does the Kevlar intake add? On the dyno the system gained 8 to 10 hp and 10 to 12 ft-lb, while road-dyno testing with Insoric recorded a 16 hp increase and 14 Nm of torque. Eventuri also measured a lower intake air temperature, 4.5C above ambient versus 7.5C on the stock setup, and a 0.3 second reduction in the 100 to 200 kph pull.
Does the intake keep the factory airbox, and how does it make power? Yes. The E9x M3 already uses a well-designed stock airbox, so Eventuri retained it and replaced the restrictive inlet tube connecting the airbox to the inlet manifold. A carbon fiber scoop increases airflow through the airbox, letting the V8 breathe more efficiently while lowering intake temperatures for a genuine performance gain.
What comes in the box and what is the intake tube made from? The kit includes a carbon Kevlar intake tube, a high-flow urethane cone filter, a carbon fiber inlet scoop, a CNC-machined breather adapter, a laser-cut stainless steel debris guard, and a silicone coupler with OEM-specification clamps. The signature yellow Kevlar tube is chosen for strength and optimized airflow.
Is installation difficult, and can the intake be returned? Installation is a direct-fit, bolt-on job that uses the retained factory airbox and OEM-specification clamps, so no major modifications are required. Note that this item is not eligible for return, so confirm your E90, E92, or E93 M3 application and the yellow Kevlar finish before ordering

About Eventuri

Eventuri was founded by a team of engineers and enthusiasts with a background in Aeronautics and tuning – all sharing a passion for cars and performance. After owning various intakes over many years for their own cars and being disappointed with the gains which seldom lived up to their claims – they decided to take things into our own hands and rewrite the book. To set a new benchmark in intake design and technology, above all – to engineer systems which provide real gains and then to publish genuine figures. Their systems are extensively developed using cutting edge design, testing and prototyping methods. With a focus on performance, each design undergoes CFD analysis and is then validated at the prototype stage through volumetric airflow, intake temperature and extensive dynamometer testing. They strive to publish all the development information to illustrate the depths they go to in bringing an intake from concept to reality. Only the best materials are selected for each component – even down to the choice of fasteners and fixings in order to ensure that the quality of the end product is second to none. After many years of disappointment with the usual aftermarket intakes, they are proud to be raising the bar and creating intake systems which are setting a new standard and genuinely improve the performance of your vehicle.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Eventuri Yellow Kevlar Intake System for E9x BMW M3 [EVE-E9X-KV-INT-Y]

Guaranteed Safe Checkout

Eventuri Yellow Kevlar Intake System for E9x BMW M3

Features

Specifications

What’s Included

Applications

Notes

Frequently Asked Questions

About Eventuri

Reviews