Which BMW models does the Eventuri Replacement Panel Filter Set fit?

The Eventuri Replacement Panel Filter Set fits the F97 BMW X3 M and the F98 BMW X4 M built from 2019 to 2023, both powered by the S58 3.0L twin-turbo inline-six. The filters are matched to that airbox layout, so they are model-specific to the X3 M and X4 M and are not a universal panel. Confirm your chassis before ordering.

How many filters come in the set?

The set includes four filters in total: two large and two small. The S58 engine uses a twin-airbox layout, so all four are needed to cover both sides completely on the X3 M and X4 M. Buying the set replaces every element in one purchase rather than sourcing filters individually.

Do these fit the stock airbox, or do I need an Eventuri intake?

They drop straight into the factory airbox with no other parts required, so a full Eventuri intake is not needed. The set also works as a direct replacement for the filters in an existing Eventuri intake. Either way, fitment stays OEM, so installation is a simple element swap.

Are the filters washable, and do they need oiling?

The panel filters use a proprietary non-woven mesh rather than oiled cotton or paper, so there is no oil to apply and no risk of over-oiling a sensor. The mesh is cleanable and reusable, which makes the set a long-term service upgrade over disposable paper elements. Clean them at your normal service interval and refit.

Will the filters add power, and do they need a tune?

The filters lower intake restriction while keeping the OEM airbox sealed, which supports sharper throttle response and cleaner airflow, especially on tuned cars. They are a drop-in upgrade and do not require a tune to run. Gains from a filter alone are modest; the main benefit is freer flow and a reusable, higher-flow element.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Eventuri Replacement Panel Filter Set for F9X BMW X3 M and X4 M

Eventuri’s panel filters follow the same design philosophy as its full carbon fiber intake systems cutting-edge engineering backed by rigorous testing and prototyping. Each design is optimized via CFD, then validated in prototype form through volumetric airflow measurement, intake temperature analysis, and extensive dynamometer testing. Eventuri publishes development data to demonstrate the depth of engineering from concept to finished product.

Features

CFD-optimized filter architecture
Validated by airflow, IAT, and dyno testing
Prototype-to-production development with rigorous QA
Transparent published development data
Engineered to match Eventuri intake performance standards

Applications

BMW X3 M: F97 (2019-2023)
[S58 – 3.0L I6 twin-turbo]
BMW X4 M: F98 (2019-2023)
[S58 – 3.0L I6 twin-turbo]

Notes

This item is not eligible for return

Frequently Asked Questions

Which BMW models does the Eventuri Replacement Panel Filter Set fit? The Eventuri Replacement Panel Filter Set fits the F97 BMW X3 M and the F98 BMW X4 M built from 2019 to 2023, both powered by the S58 3.0L twin-turbo inline-six. The filters are matched to that airbox layout, so they are model-specific to the X3 M and X4 M and are not a universal panel. Confirm your chassis before ordering.
How many filters come in the set? The set includes four filters in total: two large and two small. The S58 engine uses a twin-airbox layout, so all four are needed to cover both sides completely on the X3 M and X4 M. Buying the set replaces every element in one purchase rather than sourcing filters individually.
Do these fit the stock airbox, or do I need an Eventuri intake? They drop straight into the factory airbox with no other parts required, so a full Eventuri intake is not needed. The set also works as a direct replacement for the filters in an existing Eventuri intake. Either way, fitment stays OEM, so installation is a simple element swap.
Are the filters washable, and do they need oiling? The panel filters use a proprietary non-woven mesh rather than oiled cotton or paper, so there is no oil to apply and no risk of over-oiling a sensor. The mesh is cleanable and reusable, which makes the set a long-term service upgrade over disposable paper elements. Clean them at your normal service interval and refit.
Will the filters add power, and do they need a tune? The filters lower intake restriction while keeping the OEM airbox sealed, which supports sharper throttle response and cleaner airflow, especially on tuned cars. They are a drop-in upgrade and do not require a tune to run. Gains from a filter alone are modest; the main benefit is freer flow and a reusable, higher-flow element.

About Eventuri

Eventuri was founded by a team of engineers and enthusiasts with a background in Aeronautics and tuning – all sharing a passion for cars and performance. After owning various intakes over many years for their own cars and being disappointed with the gains which seldom lived up to their claims – they decided to take things into our own hands and rewrite the book. To set a new benchmark in intake design and technology, above all – to engineer systems which provide real gains and then to publish genuine figures. Their systems are extensively developed using cutting edge design, testing and prototyping methods. With a focus on performance, each design undergoes CFD analysis and is then validated at the prototype stage through volumetric airflow, intake temperature and extensive dynamometer testing. They strive to publish all the development information to illustrate the depths they go to in bringing an intake from concept to reality. Only the best materials are selected for each component – even down to the choice of fasteners and fixings in order to ensure that the quality of the end product is second to none. After many years of disappointment with the usual aftermarket intakes, they are proud to be raising the bar and creating intake systems which are setting a new standard and genuinely improve the performance of your vehicle.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Eventuri Replacement Panel Filter Set for F9X BMW X3 M and X4 M [EVE-FX34M-PF]

Guaranteed Safe Checkout

Eventuri Replacement Panel Filter Set for F9X BMW X3 M and X4 M

Features

Applications

Notes

Frequently Asked Questions

About Eventuri

Reviews