Which vehicles does the Eventuri G8X intake system fit?

The Eventuri G8X intake system fits the BMW M2 (G87), M3 (G80/G81), and M4 (G82/G83), all running the S58 3.0L twin-turbo inline-six from 2021 to present (2023 to present for the M2). It installs at the factory mounting locations and is fully compatible with the CSL strut brace.

How much power does the Eventuri intake add?

Eventuri reports gains of roughly 13 to 18 hp on the S58, with the largest benefits appearing on higher-output builds. The 40% larger filters and up to 160% larger, dimpled turbo inlets cut pressure loss and lower intake temperatures, so the turbos require less wastegate duty and the system supports builds well beyond 1000 hp.

What finishes are available?

The system comes in two 100% pre-preg 2x2 twill carbon fiber finishes: Gloss Carbon and Matte Carbon. Both share identical construction and performance hardware, so the choice is purely aesthetic. Pick the finish that best matches your engine bay.

Is the Eventuri intake hard to install?

No. It is a plug-and-play design that reuses the OEM mounting points with machined mounts and laser-cut brackets, so no cutting or modification is required. Owners with basic hand tools can complete it in an afternoon, though Eventuri recommends professional installation for the best fit and finish.

How often do the filters need cleaning or replacement?

The system uses two dry, ISO-tested cone filters (Type D2, EVE-W192-FTR) flowing up to 900 CFM. Because they use a dry medium, they are cleaned with gentle vacuuming or low-pressure air rather than oiling, and replaced only when worn or damaged. Intervals depend on driving conditions and track use.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Eventuri V2 Black Carbon Intake System for G8X BMW M2 / M3 / M4

Eventuri introduces a revised G8X intake engineered for seamless fitment with the CSL strut brace. Developed through intensive R&D, the system surpasses the stock M2 / M3 / M4 setup and is future-proofed for builds well beyond 1000 hp. From air-boxes to turbo inlets, every stage is redesigned to cut pressure loss, raise mass airflow, and keep inlet temperatures low. Two custom filters offering a 40% larger filtration area than stock sit within Eventuri’s patented Venturi housings to deliver a smooth, accelerated feed to the turbos. The turbo inlets themselves are up to 160% larger in cross-section than stock and feature an advanced dimpled inner surface that creates a boundary “cushion” of air, reducing wall friction and pressure drop. With lower intake resistance, the turbos require less waste-gate duty cycle, translating to improved overall performance.

Filter Housing Assemblies

The filter housings integrate Eventuri’s second-generation bespoke filters, aluminum inlet cowls, and stainless steel brackets. A carbon pod encloses the reverse-mounted element and shapes airflow directly into the tube section that connects to the turbo inlets. Unlike the OEM air box where air changes direction twice through a panel filter—this design admits air at the front of the housing and guides it into the tube without abrupt turns. The result is a shorter, smoother path from filter to turbo, allowing the turbochargers to operate with reduced drag.

Bespoke Cone Filter

To maximize flow, Eventuri developed a new filter element that exploits the available engine-bay volume. Measuring 192 mm (7.6″) in diameter, the element when paired with a housing featuring a 4″ opening—has been flow tested to deliver up to 900 CFM at 28″ H₂O. The dry, ISO-tested filtration medium meets OEM-level standards, while Eventuri’s signature internal flow cones support the Venturi housing principle for efficient, accelerated airflow.

Patented Technology

Eventuri’s patented filter housing tapers with a smooth reduction in cross-section as it envelopes the element and transitions into the tubing. This geometry induces the Venturi effect accelerating airflow while preserving laminar conditions functioning like an oversized velocity stack. Paired with Eventuri’s bespoke filters, the housing promotes an even velocity profile at exit for efficient, stable delivery to the inlet tract. Further technical details are outlined on the Technology and Filters pages.

Turbo Inlets

Eventuri enlarges both turbo inlets to reduce intake resistance and quicken spool. While improvements on a stock vehicle may be modest, the benefits scale with elevated boost targets on higher-power builds. Beyond increased size, Eventuri applies an optimized dimpled inner surface developed through extensive R&D and CFD analysis. This geometry lowers frictional pressure losses versus a smooth bore by creating a thin air cushion along the wall, allowing core airflow to slip with reduced drag and maintain a more uniform velocity profile. The result is higher flow velocity under equivalent conditions and stronger performance as power demands rise.

Carbon Ducts

Eventuri mates each filter housing to pre-preg carbon ducts that channel cold air from the factory entry points behind the headlamps. The carbon construction blocks engine-bay heat more effectively than non-airtight heat shields. Precision details including machined mounts indexing to the OEM air box locations and laser-cut bracketry ensure secure, OE-level fitment and durability.

Carbon Main Tube

Eventuri’s carbon replacement for the OEM tube employs a smoother internal profile and increased volume, starting with a 4″ internal diameter at the filter and sustaining it before a controlled taper into the turbo inlet. Integrated, molded brackets secure the tube in a fixed position for stable, OE-quality fitment.

Features

CSL strut-brace compatible, 1000+ hp ready
Patented Venturi housings with 40% larger filters
Up to 160% larger, dimpled turbo inlets for faster spool
Lower pressure loss and inlet temps
Bespoke 192 mm dry filter (ISO-tested), up to 900 CFM @ 28″ H₂O
Fully sealed pre-preg carbon ducts from factory headlamp inlets
Carbon main tube: 4″ ID with smooth taper to turbo
OE-level fitment with machined mounts and laser-cut brackets

What’s Included

Carbon Fiber Patented Venturi Filter Housings (2)
Bespoke High Flow Dry Cone Filters (2)
Carbon Fiber Inlet Ducts (2)
Carbon Fiber Intake Tube
Thermoplastic Turbo Inlets (2)
Laser Cut Stainless Steel Brackets
Custom Flexible Hose
CNC Machined Bracket Mounts and Reinforcement Rings

Applications

BMW M2: G87 | 2023-present | S58 3.0L I6 tt
BMW M3: G80, G81 | 2021-present | S58 3.0L I6 tt
BMW M4: G82. G83 | 2021-present | S58 3.0L I6 tt

Notes

This item is not eligible for return

Frequently Asked Questions

Which vehicles does the Eventuri G8X intake system fit? The Eventuri G8X intake system fits the BMW M2 (G87), M3 (G80/G81), and M4 (G82/G83), all running the S58 3.0L twin-turbo inline-six from 2021 to present (2023 to present for the M2). It installs at the factory mounting locations and is fully compatible with the CSL strut brace.
How much power does the Eventuri intake add? Eventuri reports gains of roughly 13 to 18 hp on the S58, with the largest benefits appearing on higher-output builds. The 40% larger filters and up to 160% larger, dimpled turbo inlets cut pressure loss and lower intake temperatures, so the turbos require less wastegate duty and the system supports builds well beyond 1000 hp.
What finishes are available? The system comes in two 100% pre-preg 2×2 twill carbon fiber finishes: Gloss Carbon and Matte Carbon. Both share identical construction and performance hardware, so the choice is purely aesthetic. Pick the finish that best matches your engine bay.
Is the Eventuri intake hard to install? No. It is a plug-and-play design that reuses the OEM mounting points with machined mounts and laser-cut brackets, so no cutting or modification is required. Owners with basic hand tools can complete it in an afternoon, though Eventuri recommends professional installation for the best fit and finish.
How often do the filters need cleaning or replacement? The system uses two dry, ISO-tested cone filters (Type D2, EVE-W192-FTR) flowing up to 900 CFM. Because they use a dry medium, they are cleaned with gentle vacuuming or low-pressure air rather than oiling, and replaced only when worn or damaged. Intervals depend on driving conditions and track use.

About Eventuri

Eventuri was founded by a team of engineers and enthusiasts with a background in Aeronautics and tuning – all sharing a passion for cars and performance. After owning various intakes over many years for their own cars and being disappointed with the gains which seldom lived up to their claims – they decided to take things into our own hands and rewrite the book. To set a new benchmark in intake design and technology, above all – to engineer systems which provide real gains and then to publish genuine figures. Their systems are extensively developed using cutting edge design, testing and prototyping methods. With a focus on performance, each design undergoes CFD analysis and is then validated at the prototype stage through volumetric airflow, intake temperature and extensive dynamometer testing. They strive to publish all the development information to illustrate the depths they go to in bringing an intake from concept to reality. Only the best materials are selected for each component – even down to the choice of fasteners and fixings in order to ensure that the quality of the end product is second to none. After many years of disappointment with the usual aftermarket intakes, they are proud to be raising the bar and creating intake systems which are setting a new standard and genuinely improve the performance of your vehicle.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Eventuri V2 Black Carbon Intake System for G8X BMW M2 / M3 / M4 [EVE-G8XMV2-CF-INT/EVE-G8XMV2-CFM-INT]

Guaranteed Safe Checkout

Eventuri V2 Black Carbon Intake System for G8X BMW M2 / M3 / M4

Filter Housing Assemblies

Bespoke Cone Filter

Patented Technology

Turbo Inlets

Carbon Ducts

Carbon Main Tube

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About Eventuri

Reviews