Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Eventuri Black Carbon Intake System for G0X BMW X5 / X6 / X7 M50i

Eventuri introduces the X5 G05 M50i intake an adaptation of the X5 M system engineered, to reduce pressure loss, raise flow rate, and maintain low inlet temperatures. With the factory cold-air feeds positioned at the front and the turbo inlets facing the rear, the OEM air-boxes force airflow through a 180° turn, creating restriction. Eventuri addresses this by adding an auxiliary cold-air feed from the scuttle panel, establishing a more direct path to the turbo inlets. The result is higher flow with stable IATs and a de-restricted induction soundtrack; with the intake openings oriented toward the cabin, turbo flutter and pressure-release notes become distinctly audible, enhancing driver engagement.

FILTER HOUSING ASSEMBLIES

Eventuri’s filter housings combine bespoke Generation 2 filters with aluminum inlet cowls and stainless-steel brackets. A carbon pod encloses the reverse-mounted element and guides airflow smoothly to the OEM turbo inlets. Unlike the OEM airbox where air enters the base, makes two abrupt 90° turns through the panel filter and tube, Eventuri’s architecture provides a direct path from the front of the housing to the turbo inlet, minimizing direction changes and reducing drag for more efficient turbo operation.

BESPOKE CONE FILTER

Eventuri maximizes available engine-bay volume with a purpose-sized filter element to achieve the highest possible flow rate. The dry filtration medium is ISO-tested to meet OEM-level filtration standards. Each filter incorporates Eventuri’s signature flow cones to support the Venturi housing principle and promote smooth, accelerated airflow.

CARBON TWIN AIR DUCTS

Eventuri identifies the primary OEM restriction as the mismatch between the front-mounted air feeds and rear-facing turbo inlets. To resolve this, Eventuri’s air ducts add an upper opening and a secondary cold-air feed from the scuttle panel. Working in concert with the factory feeds, the dual-source design delivers a higher overall flow rate and a more direct, less tortuous path to the turbos.

EPDM REAR FEEDS

Eventuri ensures a fully sealed system by coupling the carbon duct’s secondary inlets to EPDM feed tubes that route to the scuttle panel. With the hood closed, the scuttle area is isolated from engine-bay heat, supplying the intake with ambient air. A pre-cut center section of the OEM hood seal is included to accommodate the EPDM feeds for a precise, factory-quality installation.

CARBON ENGINE COVER

Because the filter housings are maximized for volume, the OEM engine cover no longer fits. Eventuri provides a redesigned cover that tidies the bay and conceals engine hardware for a refined appearance. Intentional gaps between the cover and the intakes allow engine heat to dissipate rather than soak into the intake system.

Features

Auxiliary scuttle-panel feed for a direct, higher-flow path to rear-facing turbos
Fully sealed system with EPDM rear feeds supplying ambient air when hood is closed
Carbon twin air ducts with dual-source cold-air routing
Reverse-mounted Gen 2 cone filters with flow cones; ISO-tested dry media
Carbon filter housings with aluminum inlet cowls and stainless brackets
Straight, low-drag flow path to OEM turbo inlets
Lower IATs, reduced restriction, and enhanced turbo sound toward the cabin
Pre-preg carbon engine cover with heat-dissipating gaps for fit and finish

What’s included

Carbon Fiber Patented Venturi Filter Housings (2)
Bespoke High Flow Dry Cone Filters (2)
Carbon Fiber Twin Air Ducts (2)
Carbon Fiber Engine Cover (Roundel must be transferred from original cover)
EPDM Rear Air Feeds (2)
Silicone Couplers
CNC Machined Bracket Mounts

Applications

BMW X5 M50i: G05 (2019-2023)
[N63 – 4.4 L V8]
BMW X6 M50i: G06 (2019-2023)
[N63 – 4.4 L V8]
BMW X7 M50i: G07 (2019-2023)
[N63 – 4.4 L V8]

Notes

This item is not eligible for return
Compatible with Pre-LCI Alpina XB7 Models

About Eventuri

Eventuri was founded by a team of engineers and enthusiasts with a background in Aeronautics and tuning – all sharing a passion for cars and performance. After owning various intakes over many years for their own cars and being disappointed with the gains which seldom lived up to their claims – they decided to take things into our own hands and rewrite the book. To set a new benchmark in intake design and technology, above all – to engineer systems which provide real gains and then to publish genuine figures. Their systems are extensively developed using cutting edge design, testing and prototyping methods. With a focus on performance, each design undergoes CFD analysis and is then validated at the prototype stage through volumetric airflow, intake temperature and extensive dynamometer testing. They strive to publish all the development information to illustrate the depths they go to in bringing an intake from concept to reality. Only the best materials are selected for each component – even down to the choice of fasteners and fixings in order to ensure that the quality of the end product is second to none. After many years of disappointment with the usual aftermarket intakes, they are proud to be raising the bar and creating intake systems which are setting a new standard and genuinely improve the performance of your vehicle.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Eventuri Black Carbon Intake System for G0X BMW X5 / X6 / X7 M50i [EVE-X5M50-CF-INT]

Guaranteed Safe Checkout

Eventuri Black Carbon Intake System for G0X BMW X5 / X6 / X7 M50i

FILTER HOUSING ASSEMBLIES

BESPOKE CONE FILTER

CARBON TWIN AIR DUCTS

EPDM REAR FEEDS

CARBON ENGINE COVER

Features

What’s included

Applications

Notes

About Eventuri

Reviews