Will the Eventuri BMC Replacement Filter fit my Ferrari F12?

Yes. The Eventuri BMC Replacement Filter set fits the 2012-2017 Ferrari F12berlinetta (F152). It is a direct-fit replacement for both the original factory panel filters and the filters supplied with the Eventuri Carbon Intake System, so it works whether your car runs the OEM airbox or the Eventuri intake. No modifications are required.

Is this the full Eventuri intake system or only the filters?

This listing is for the replacement filter set only, not the complete Eventuri Carbon Intake System. It is a BMC panel filter service kit for owners who already run the Eventuri intake or the factory airbox and need to restore airflow. If you want the full carbon intake, that is a separate product.

How do the BMC filters compare to the factory paper filters?

The factory Ferrari filters use paper elements chosen mainly for long service intervals and noise suppression. Eventuri specifies BMC panel elements that flow more air while keeping proper filtration efficiency. Replacing worn or dirty filters restores the smooth, laminar airflow the Eventuri carbon housing was designed around, protecting throttle response on the high-output V12.

Is installation difficult, and when should I replace the filters?

No, installation is straightforward and requires no modifications, since the filters are a direct fit. As a service item, replace them when the elements become dirty or contaminated, or at your normal intake service interval. Clean filters preserve airflow, throttle response, and consistent performance on the naturally aspirated Ferrari V12.

Can I return the filters, and are they covered by warranty?

No, this item is not eligible for return, so confirm the F12 fitment before ordering. Eventuri designs and manufactures the filters in the UK to its own specifications, and warranty coverage plus damage-in-transit support are provided. Contact Bulletproof Automotive with any fitment or service questions before you buy.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Eventuri Carbon Intake System BMC Replacement Filter for F152 Ferrari F12berlinetta

Eventuri’s panel filters follow the same engineering philosophy as its full carbon intake systems advanced design backed by rigorous testing and prototyping. Each application undergoes CFD analysis and is validated in prototype form through volumetric airflow measurement, intake temperature monitoring, and comprehensive dyno testing, with development data published to demonstrate the depth of the process. Leveraging a proven partnership with BMC, Eventuri specifies BMC panel elements for this application. The result is a higher flow rate than OEM filters while maintaining optimal filtration efficiency.

Features

CFD-led design with prototype validation
Tested for airflow, IAT, and dyno performance
Published development data for transparency
BMC panel elements specified by Eventuri
Higher flow than OEM with optimal filtration

Applications

Ferrari F12berlinetta: F152 (2012-2017)
[6.2L V12]

Notes

This item is not eligible for return

Frequently Asked Questions

Will the Eventuri BMC Replacement Filter fit my Ferrari F12?
Yes. The Eventuri BMC Replacement Filter set fits the 2012-2017 Ferrari F12berlinetta (F152). It is a direct-fit replacement for both the original factory panel filters and the filters supplied with the Eventuri Carbon Intake System, so it works whether your car runs the OEM airbox or the Eventuri intake. No modifications are required.
Is this the full Eventuri intake system or only the filters?
This listing is for the replacement filter set only, not the complete Eventuri Carbon Intake System. It is a BMC panel filter service kit for owners who already run the Eventuri intake or the factory airbox and need to restore airflow. If you want the full carbon intake, that is a separate product.
How do the BMC filters compare to the factory paper filters?
The factory Ferrari filters use paper elements chosen mainly for long service intervals and noise suppression. Eventuri specifies BMC panel elements that flow more air while keeping proper filtration efficiency. Replacing worn or dirty filters restores the smooth, laminar airflow the Eventuri carbon housing was designed around, protecting throttle response on the high-output V12.
Is installation difficult, and when should I replace the filters?
No, installation is straightforward and requires no modifications, since the filters are a direct fit. As a service item, replace them when the elements become dirty or contaminated, or at your normal intake service interval. Clean filters preserve airflow, throttle response, and consistent performance on the naturally aspirated Ferrari V12.
Can I return the filters, and are they covered by warranty?
No, this item is not eligible for return, so confirm the F12 fitment before ordering. Eventuri designs and manufactures the filters in the UK to its own specifications, and warranty coverage plus damage-in-transit support are provided. Contact Bulletproof Automotive with any fitment or service questions before you buy.

About Eventuri

Eventuri was founded by a team of engineers and enthusiasts with a background in Aeronautics and tuning – all sharing a passion for cars and performance. After owning various intakes over many years for their own cars and being disappointed with the gains which seldom lived up to their claims – they decided to take things into our own hands and rewrite the book. To set a new benchmark in intake design and technology, above all – to engineer systems which provide real gains and then to publish genuine figures. Their systems are extensively developed using cutting edge design, testing and prototyping methods. With a focus on performance, each design undergoes CFD analysis and is then validated at the prototype stage through volumetric airflow, intake temperature and extensive dynamometer testing. They strive to publish all the development information to illustrate the depths they go to in bringing an intake from concept to reality. Only the best materials are selected for each component – even down to the choice of fasteners and fixings in order to ensure that the quality of the end product is second to none. After many years of disappointment with the usual aftermarket intakes, they are proud to be raising the bar and creating intake systems which are setting a new standard and genuinely improve the performance of your vehicle.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.