Which G63 AMG models does the Eventuri Carbon Intake System fit?

The Eventuri Carbon Intake System fits the W463A and W464 Mercedes-AMG G63 from 2019-2024 (4.0L twin-turbo V8 M177). It bolts on using the factory mounting locations and retains the OEM cold air feeds. It does not fit the 2025+ W465 G63, which uses a different intake system. Confirm your chassis generation before ordering.

How much power does this intake add?

Independent dyno testing by Mercedes specialists MSL Performance recorded a peak gain of 21whp and 12ft-lb, with mid-range gains of 28whp and 32ft-lb. The larger airbox volume flows roughly 25% more air than the OEM boxes, letting the turbos reach peak boost sooner with a lower wastegate duty cycle. That translates to sharper throttle response and stronger pull to redline.

Does the Eventuri Carbon Intake System require a tune?

No. The gains are recorded on the stock ECU, and the intake retains the factory MAF sensor mounts and cold air feed locations, so no remap is required. It works well alongside an aftermarket tune if you add one later, but the system is designed to deliver measurable results on an otherwise stock vehicle with no software changes.

Is this a full intake or just a carbon engine cover?

This is a complete intake system, not a cosmetic cover. It includes two-part carbon fiber airbox bases and lids, bespoke high-flow dry filters, CNC-machined sensor mounts, EPDM duct connectors, stainless steel brackets, and a redesigned carbon engine cover with an integrated heat shield and high-temperature silicone insulation (the cover is part of the system, not sold separately).

How are the filters maintained?

The system uses bespoke dry panel filters, so they are cleaned rather than oiled. Eventuri recommends cleaning or blowing out the filters periodically depending on driving conditions, using a dry-filter cleaning kit. Do not apply filter oil, which can foul the sensors. A replacement filter set (2x) is available under part number EVE-G63AMG-FTR when the originals reach the end of their service life.

Eventuri Gloss Carbon Intake System for W463A / W464 Mercedes-AMG G63

Introducing the G63 AMG W464 Eventuri Intake, a precision-crafted system made from prepreg carbon fiber, featuring CNC-machined components and custom-designed high-flow filters. This intake redefines performance gains in the aftermarket segment for this platform. By utilizing additional space under the hood, Eventuri has significantly increased intake volume, achieving a 25% greater airflow rate compared to OEM airboxes while retaining the original cold air feeds. The larger intake volume enables a smoother airflow path, reducing resistance for the turbos. This results in a decreased wastegate duty cycle and enhanced overall performance. To accommodate the increased intake size, Eventuri has redesigned the engine cover, incorporating a custom-molded heat shield with high-temperature silicone insulation to protect against excessive heat from the turbos and manifold. The Eventuri G63 AMG intake system delivers industry-leading performance gains while enhancing both the auditory and visual experience of driving and ownership.

Airbox Assemblies

The airbox assemblies feature a two-part design, with upper and lower sections separated by filter panels. Each section is carefully engineered to maximize internal volume while maintaining an unobstructed airflow path to the turbos. The primary challenge in this design was increasing the airbox volume to improve flow rate capacity beyond the limitations of the stock airboxes. Due to the compact nature of the G63 engine bay, this was achieved by optimizing the internal height of the airboxes. The most significant improvement came from enlarging the upper airbox lids, which substantially increased volume and created a smoother, more efficient airflow path.

Airbox Comparisons

A direct comparison between the Eventuri intake and OEM airboxes highlights the improvements in volume and airflow efficiency. The OEM cold air feed connects to the airbox via a long, flexible duct with restricted sizing, limiting airflow and reducing the ability of the airbox base to optimize the incoming flow onto the filter. Eventuri has integrated most of the cold air feed length into the airbox base, allowing for a significantly larger internal volume and a more organic airflow path, ensuring maximum filter exposure.
The OEM airbox lid presents further restrictions due to the close proximity of the filter panel to the turbo inlet. In the stock design, airflow must transition abruptly from the rectangular filter to the circular turbo inlet, which is positioned to one side of the airbox. This results in stagnant airflow across significant portions of the filter, increasing resistance. Eventuri has lowered the filter position, creating more space for a smoother transition to the turbo inlet. This adjustment maximizes filter efficiency, minimizes turbulence, and reduces drag on the turbos.

Engine Cover

By optimizing the available space under the hood, Eventuri has maximized the intake system’s volume, which necessitated a redesigned engine cover. The OEM cover sits close to the stock intakes, limiting expansion. Eventuri’s new cover is constructed from prepreg carbon fiber and incorporates high-temperature insulation to protect against heat from the turbos.

Custom Panel Filters

Increasing the intake size was only possible with the development of custom filters. Eventuri’s high-flow panel filters utilize a multi-layer dry medium for effective filtration while featuring a curved profile to eliminate sharp corners within the airbox. This design prevents turbulence, ensuring smooth and efficient airflow.

Dyno Testing

The intake system has been independently dyno-tested by Mercedes specialists MSL Performance. Back-to-back tests were conducted against the stock airbox, with multiple runs recorded for each configuration. The best results from the stock airbox were compared with the best results from the Eventuri system. The dyno results consistently show gains throughout the RPM range, attributed to the turbos reaching peak boost earlier and with a lower wastegate duty cycle due to the intake’s higher efficiency. These gains were recorded despite higher dyno cell temperatures during the Eventuri tests. On the road, this translates to improved part-throttle and full-throttle response, with the vehicle pulling more aggressively to the redline.

Flow Bench Testing

Flow rate tests were conducted using a Superflow SF-1020 to measure the maximum possible flow rate at a pressure drop of 28” H2O. The tests were performed under controlled conditions on the same day using an identical test jig for each system. Eventuri’s full intake system was tested against the stock airbox, demonstrating that the stock airbox is highly restrictive. The Eventuri system improves maximum possible flow rate by up to 25%, achieving these gains while maintaining a sealed intake system that draws air from the same location as the OEM setup. While an open system might provide higher flow rates, it would compromise intake air temperatures, negatively affecting performance.

Features

Prepreg carbon fiber construction
CNC-machined components
Custom high-flow
25% greater airflow rate
Reduces resistance for turbos, lowering the wastegate duty cycle and improving throttle response
Redesigned engine cover
Two-part airbox design
Lowered filter position
Sealed intake system
Independent dyno-tested gains

Performance Specifications

Peak Performance Gain: 21whp / 12ft-lb
Mid-Range Performance Gain: 28whp / 32ft-lb

What’s Included

The Eventuri G63 AMG intake system is composed of precisely engineered components, each designed for optimal performance and manufactured to the highest standards. Constructed entirely from pre-preg carbon fiber without the use of fiberglass, the system ensures a smooth internal surface, promoting uninterrupted and efficient airflow. Each intake system consists of the components below.
- Carbon fiber airbox bases
- Carbon fiber airbox lids
- Bespoke high flow dry filters
- Carbon fiber engine cover
- CNC-machined sensor mounts
- Custom EPDM flexible duct connectors
- Laser cut stainless steel brackets

Applications

Mercedes-AMG G63: W463A, W464 (2019-2024) [4.0L TT V8 M177]

Notes

This item is not eligible for return

Frequently Asked Questions

Which G63 AMG models does the Eventuri Carbon Intake System fit? The Eventuri Carbon Intake System fits the W463A and W464 Mercedes-AMG G63 from 2019-2024 (4.0L twin-turbo V8 M177). It bolts on using the factory mounting locations and retains the OEM cold air feeds. It does not fit the 2025+ W465 G63, which uses a different intake system. Confirm your chassis generation before ordering.
How much power does this intake add? Independent dyno testing by Mercedes specialists MSL Performance recorded a peak gain of 21whp and 12ft-lb, with mid-range gains of 28whp and 32ft-lb. The larger airbox volume flows roughly 25% more air than the OEM boxes, letting the turbos reach peak boost sooner with a lower wastegate duty cycle. That translates to sharper throttle response and stronger pull to redline.
Does the Eventuri Carbon Intake System require a tune? No. The gains are recorded on the stock ECU, and the intake retains the factory MAF sensor mounts and cold air feed locations, so no remap is required. It works well alongside an aftermarket tune if you add one later, but the system is designed to deliver measurable results on an otherwise stock vehicle with no software changes.
Is this a full intake or just a carbon engine cover? This is a complete intake system, not a cosmetic cover. It includes two-part carbon fiber airbox bases and lids, bespoke high-flow dry filters, CNC-machined sensor mounts, EPDM duct connectors, stainless steel brackets, and a redesigned carbon engine cover with an integrated heat shield and high-temperature silicone insulation (the cover is part of the system, not sold separately).
How are the filters maintained? The system uses bespoke dry panel filters, so they are cleaned rather than oiled. Eventuri recommends cleaning or blowing out the filters periodically depending on driving conditions, using a dry-filter cleaning kit. Do not apply filter oil, which can foul the sensors. A replacement filter set (2x) is available under part number EVE-G63AMG-FTR when the originals reach the end of their service life.

About Eventuri

Eventuri was founded by a team of engineers and enthusiasts with a background in Aeronautics and tuning – all sharing a passion for cars and performance. After owning various intakes over many years for their own cars and being disappointed with the gains which seldom lived up to their claims – they decided to take things into our own hands and rewrite the book. To set a new benchmark in intake design and technology, above all – to engineer systems which provide real gains and then to publish genuine figures. Their systems are extensively developed using cutting edge design, testing and prototyping methods. With a focus on performance, each design undergoes CFD analysis and is then validated at the prototype stage through volumetric airflow, intake temperature and extensive dynamometer testing. They strive to publish all the development information to illustrate the depths they go to in bringing an intake from concept to reality. Only the best materials are selected for each component – even down to the choice of fasteners and fixings in order to ensure that the quality of the end product is second to none. After many years of disappointment with the usual aftermarket intakes, they are proud to be raising the bar and creating intake systems which are setting a new standard and genuinely improve the performance of your vehicle.

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Eventuri Gloss Carbon Intake System for W463A / W464 Mercedes-AMG G63 [EVE-G63AMG-CF-INT]

Guaranteed Safe Checkout