What does the Fuel Pressure Redline Package NIS-005 add over the flex fuel only Redline kit?

The Fuel Pressure Redline Package NIS-005 adds the CAN Gateway Fuel Pressure Monitoring Kit. It places a 0-150 psi sensor on the factory fuel rail and reports its reading through the gateway, so your tuner sees rail pressure alongside ethanol content. Every other component is shared between the two kits.

Is a custom tune required?

Yes. COBB lists custom tuning as a requirement for the Fuel Pressure Monitoring Kit. A COBB Protuner or another Accessport tuner builds the calibration, and the included Accessport flashes it to the ECU. The Accessport can store up to 100 maps, so street and ethanol calibrations can sit side by side.

Can this package be used on a California registered GT-R?

No. COBB lists it as not legal for sale or use in California on any emission controlled motor vehicle, with California Air Resources Board testing still pending. Outside California, COBB relies on SEMA Garage Emissions Certification SC-COB01-0086 under the EPA Anti-Tampering Policy for on-street sale.

Does this kit work with a 2015 or newer GT-R?

No. The AP3-NIS-005 Accessport covers the USDM R35 GT-R from 2009 to 2014 and international cars to 2013, plus 2008 JDM cars and 2009 to 2010 Vspec models. COBB sells the same hardware with the NIS-008 Accessport for later cars, which also adds TCM flashing.

Do the new sensors replace any factory sensor?

No. The CAN Gateway Module sends the ethanol content and fuel pressure readings onto the vehicle network as digital messages, so neither sensor takes over a factory input. All of the original sensors on the VR38DETT engine keep reporting to the ECU exactly as they did before installation.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

COBB Tuning Stage 1+ CAN Flex Fuel and Fuel Pressure Redline Package NIS-005 for R35 Nissan GT-R

COBB Tuning’s Fuel Pressure Redline Package NIS-005 is the most complete Stage 1+ kit COBB offers for the 2009-2014 R35 GT-R, pairing the hand-laid Redline Carbon Fiber Big SF Intake with the AP3-NIS-005 Accessport V3, a High Flow Fuel Pump Kit and the CAN Gateway with both flex fuel and fuel pressure monitoring kits. The gateway feeds ethanol content and rail pressure to the ECU without taking over any factory sensor channel. It suits the owner who wants carbon in the engine bay and a tuner watching the fuel system closely.

Features

Hand-laid Redline carbon fiber Big SF tubing with custom K&N cone filter elements
Steel reinforced silicone couplers; bolts in without cutting or bumper removal
One gateway module carries ethanol content and fuel pressure readings
COBB 0-150 psi pressure sensor joins the gateway through an M12 industrial connector
High Flow Fuel Pump Kit for the extra fuel volume ethanol demands
Accessport performance measuring for 0-60 mph, 60 foot and quarter mile times

What’s Included

Accessport V3 (AP3-NIS-005)
Redline Carbon Fiber Big SF Intake System (7C1250)
High Flow Fuel Pump Kit (3C1450)
CAN Gateway Module (860600)
CAN Gateway Harness and Bracket Kit (3C16RL)
CAN Gateway Flex Fuel Kit (3C1700)
CAN Gateway Fuel Pressure Monitoring Kit (3C1750)
COBB Vehicle Badge (800200)

Applications

Nissan GT-R: R35 | 2009-2014 | USDM
Nissan GT-R: R35 | 2008-2013 | International markets (JDM 2008-2013; ADM, East Asia, EDM, Gulf Spec and South Africa 2009-2013)
Nissan GT-R Vspec: R35 | 2009-2010 | EDM, Gulf Spec and JDM (including Vspec Race)

Notes

Not legal for sale or use in California on any emission controlled motor vehicle; CARB testing is pending
COBB lists custom tuning as a requirement for the Fuel Pressure Monitoring Kit in the Fuel Pressure Redline Package NIS-005
The NIS-005 Accessport does not support TCM flashing or adjustable launch control
Specify left-hand or right-hand drive for the CAN Gateway harness kit
Carbon fiber is hand laid, so slight imperfections or weave pattern variances can be expected

Frequently Asked Questions

What does the Fuel Pressure Redline Package NIS-005 add over the flex fuel only Redline kit? The Fuel Pressure Redline Package NIS-005 adds the CAN Gateway Fuel Pressure Monitoring Kit. It places a 0-150 psi sensor on the factory fuel rail and reports its reading through the gateway, so your tuner sees rail pressure alongside ethanol content. Every other component is shared between the two kits.
Is a custom tune required? Yes. COBB lists custom tuning as a requirement for the Fuel Pressure Monitoring Kit. A COBB Protuner or another Accessport tuner builds the calibration, and the included Accessport flashes it to the ECU. The Accessport can store up to 100 maps, so street and ethanol calibrations can sit side by side.
Can this package be used on a California registered GT-R? No. COBB lists it as not legal for sale or use in California on any emission controlled motor vehicle, with California Air Resources Board testing still pending. Outside California, COBB relies on SEMA Garage Emissions Certification SC-COB01-0086 under the EPA Anti-Tampering Policy for on-street sale.
Does this kit work with a 2015 or newer GT-R? No. The AP3-NIS-005 Accessport covers the USDM R35 GT-R from 2009 to 2014 and international cars to 2013, plus 2008 JDM cars and 2009 to 2010 Vspec models. COBB sells the same hardware with the NIS-008 Accessport for later cars, which also adds TCM flashing.
Do the new sensors replace any factory sensor? No. The CAN Gateway Module sends the ethanol content and fuel pressure readings onto the vehicle network as digital messages, so neither sensor takes over a factory input. All of the original sensors on the VR38DETT engine keep reporting to the ECU exactly as they did before installation.

About COBB Tuning

COBB Tuning was founded by Trey Cobb in 1999 in Rockwall, Texas, as a Subaru performance shop in the back of his father’s tire shop, and is now headquartered in Austin, Texas. In 2004 COBB introduced the Accessport, a handheld ECU tuning device that flashes COBB’s off-the-shelf maps or a custom tune and doubles as a real-time gauge and datalogger. The range has since grown from Subaru to Ford, Volkswagen, Audi, Porsche, Nissan, Honda, Mazda, Mitsubishi and Toyota platforms, with intakes, intercoolers, exhausts and flex fuel kits engineered alongside the tuning, and many COBB parts carry California Air Resources Board Executive Order numbers for use in all 50 states.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

COBB Tuning Stage 1+ CAN Flex Fuel and Fuel Pressure Redline Package NIS-005 for R35 Nissan GT-R [NIS005011PCFFFP]

Guaranteed Safe Checkout

COBB Tuning Stage 1+ CAN Flex Fuel and Fuel Pressure Redline Package NIS-005 for R35 Nissan GT-R

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About COBB Tuning

Reviews