Does the APR GT-250 Adjustable Wing for Z33 fit the 350Z roadster?

APR catalogs the GT-250 Adjustable Wing for Z33 Nissan 350Z models from 2002 to 2008 and does not split coupe and roadster in its listing. The two body styles have different rear decks, so roadster owners should confirm fitment with the Bulletproof Automotive team before ordering.

Is the Gurney flap already on the wing?

Yes. Each GT-250 leaves APR with a half inch (12.7mm) carbon Gurney flap bonded to the trailing edge using 3M VHB tape. On the 350Z it adds rear load at any given angle and helps the airflow stay attached off the back of the wing, so there is nothing extra to fit.

Which span suits the 350Z, 61in or 67in?

The 61in wing measures 1549mm across and sits comfortably inside the width of the Z33 hatch, which suits a street car that sees track days and autocross. The 67in version spans 1702mm and suits a 350Z running a wider body or more front aero to balance it.

How much can the angle be adjusted?

The angle of attack sets anywhere from 0 to 15 degrees on the billet pedestals. Lower settings keep drag down on fast circuits; higher settings put more load on the rear tires for tight corners and braking zones. Set both pedestals to the same position so the wing sits level.

How long does the wing take to arrive?

APR makes every GT-250 to order and quotes one to two weeks before it ships, with transit to the delivery address on top. The Bulletproof Automotive team can give a current build estimate if the wing has to arrive before an event.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

APR Performance Carbon GT-250 Adjustable Wing for Z33 Nissan 350Z (61in)

APR Performance’s carbon GT-250 Adjustable Wing for Z33 Nissan 350Z puts a 61in (1549mm) airfoil on the back of the Z33 that returned the Z car to US showrooms for 2003, sized for the compact two-seater rather than borrowed from a larger chassis. APR shaped the 2D profile in CFD to keep downforce even across the span and lays each airfoil up from woven pre-preg carbon, cured in an autoclave in billet aluminum molds, with a carbon Gurney flap fitted before shipping. A 7.6 to 1 downforce-to-drag ratio makes it a working part for a 350Z that runs track days, time attack or autocross; on a car kept for the street it is more about the stance.

Pedestals and Mounting

Two 10mm 6061 billet aluminum pedestals carry the wing and bolt through carbon bottom plates made for the Z33, so the wing sits square on the hatch instead of on a universal base. APR builds the pedestals in three heights to set how high the airfoil sits above the body.

Features

CFD-developed 2D airfoil for even downforce along the span
Woven pre-preg carbon, autoclave-cured in billet molds
Carbon Gurney flap fitted at the factory
Carbon bottom plates made for the Z33
Pedestals available in three heights

Specifications

Span: 61in (1549mm)
Chord depth: 10in (254mm)
Angle of attack: 0 to 15 degrees
Downforce-to-drag ratio: 7.6 to 1
Pedestals: 10mm 6061 billet aluminum
Gurney flap height: 0.5in (12.7mm)

What’s Included

GT-250 carbon airfoil, 61in, with Gurney flap fitted
Carbon endplates (x2)
6061 billet aluminum pedestals (x2)
Carbon fiber Z33-specific bottom plates

Applications

Nissan 350Z: Z33 | 2002-2008

Notes

This Adjustable Wing for Z33 Nissan 350Z mounts to the rear hatch
Roadster owners: confirm fitment with our team before ordering
Also offered as a 67in GT-250 for the Z33 350Z
Made to order with a typical APR lead time of 1-2 weeks

Frequently Asked Questions

Does the APR GT-250 Adjustable Wing for Z33 fit the 350Z roadster? APR catalogs the GT-250 Adjustable Wing for Z33 Nissan 350Z models from 2002 to 2008 and does not split coupe and roadster in its listing. The two body styles have different rear decks, so roadster owners should confirm fitment with the Bulletproof Automotive team before ordering.
Is the Gurney flap already on the wing? Yes. Each GT-250 leaves APR with a half inch (12.7mm) carbon Gurney flap bonded to the trailing edge using 3M VHB tape. On the 350Z it adds rear load at any given angle and helps the airflow stay attached off the back of the wing, so there is nothing extra to fit.
Which span suits the 350Z, 61in or 67in? The 61in wing measures 1549mm across and sits comfortably inside the width of the Z33 hatch, which suits a street car that sees track days and autocross. The 67in version spans 1702mm and suits a 350Z running a wider body or more front aero to balance it.
How much can the angle be adjusted? The angle of attack sets anywhere from 0 to 15 degrees on the billet pedestals. Lower settings keep drag down on fast circuits; higher settings put more load on the rear tires for tight corners and braking zones. Set both pedestals to the same position so the wing sits level.
How long does the wing take to arrive? APR makes every GT-250 to order and quotes one to two weeks before it ships, with transit to the delivery address on top. The Bulletproof Automotive team can give a current build estimate if the wing has to arrive before an event.

About APR Performance

APR Performance designs and builds carbon fiber aerodynamic components at its facility in Chino, California. Its wing families are developed with Computational Fluid Dynamics (CFD), and APR publishes the CFD data for its GTC and GT ranges so buyers can compare downforce and drag before choosing a setting. Parts are laid up in pre-preg carbon fiber, cured in an autoclave, finished in a UV-resistant clear coat and covered by a one-year warranty against defects in workmanship and materials.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.