Does the APR GT-250 Adjustable Wing for F87 fit the M2 Competition and M2 CS?

APR catalogs the GT-250 Adjustable Wing for F87 M2 models from 2016 to 2021 and does not exclude any variant. The M2 Competition and M2 CS share the F87 body shell, and CS owners in particular should confirm fitment with the Bulletproof Automotive team before ordering.

Does the wing arrive with its Gurney flap fitted?

Yes. APR bonds a half inch (12.7mm) carbon Gurney flap to the trailing edge of every GT-250 with 3M VHB tape before it ships. On the M2 it adds rear load at a given wing angle and helps keep airflow attached off the back of the airfoil, with nothing extra to buy.

Should I choose the 61in or 67in version?

The 61in wing measures 1549mm across and stays well inside the width of the compact F87 body, which suits a street car that sees occasional track days. The 67in version reaches further across the rear deck and suits a car that runs more aggressive front aero.

How far does the angle adjust?

The billet pedestals allow the angle of attack to be set anywhere from 0 to 15 degrees. A flatter setting keeps drag low for fast circuits, while a steeper one loads the rear tires for slower corners and heavy braking. Set both pedestals to the same position so the wing stays level.

How long does it take to ship?

APR makes every GT-250 to order and quotes a lead time of one to two weeks before it ships, plus transit to the delivery address. Ask the Bulletproof Automotive team for a current estimate if the wing is needed for a specific event.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

APR Performance Carbon GT-250 Adjustable Wing for F87 BMW M2 (61in)

APR Performance’s carbon GT-250 Adjustable Wing for F87 BMW M2 gives the short-wheelbase M2 a trunk-mounted airfoil sized for a compact car, at a 61in (1549mm) span. The 2D profile was shaped in CFD to hold an even level of downforce across its length, and APR forms each airfoil from woven pre-preg carbon, autoclave-cured in billet aluminum molds, with a carbon Gurney flap bonded to the trailing edge before it leaves the shop. With a 7.6 to 1 downforce-to-drag ratio it is aimed at the M2 that runs track days and autocross; a car kept for the street will wear it more for the look than for the lap time.

Pedestals and Mounting

The wing stands on 10mm 6061 billet aluminum pedestals that bolt to carbon bottom plates shaped for the F87 trunk lid, so it sits square to the car rather than on a universal base. APR offers the pedestals in three heights to place the airfoil where it suits the setup.

Features

CFD-developed 2D airfoil holds consistent downforce across the span
Woven pre-preg carbon, autoclave-cured in billet molds
Factory-fitted carbon Gurney flap on the trailing edge
Vehicle-specific carbon bottom plates for the F87 trunk lid
Pedestals offered in three heights

What’s Included

GT-250 carbon airfoil, 61in, with Gurney flap fitted
Carbon endplates (x2)
6061 billet aluminum pedestals (x2)
Carbon fiber F87-specific bottom plates

Applications

BMW M2: F87 | 2016-2021

Notes

This GT-250 Adjustable Wing for F87 M2 mounts to the trunk lid
M2 CS owners: confirm fitment with our team before ordering
Also offered as a 67in GT-250 for the F87 M2
Made to order with a typical APR lead time of 1-2 weeks

Frequently Asked Questions

Does the APR GT-250 Adjustable Wing for F87 fit the M2 Competition and M2 CS? APR catalogs the GT-250 Adjustable Wing for F87 M2 models from 2016 to 2021 and does not exclude any variant. The M2 Competition and M2 CS share the F87 body shell, and CS owners in particular should confirm fitment with the Bulletproof Automotive team before ordering.
Does the wing arrive with its Gurney flap fitted? Yes. APR bonds a half inch (12.7mm) carbon Gurney flap to the trailing edge of every GT-250 with 3M VHB tape before it ships. On the M2 it adds rear load at a given wing angle and helps keep airflow attached off the back of the airfoil, with nothing extra to buy.
Should I choose the 61in or 67in version? The 61in wing measures 1549mm across and stays well inside the width of the compact F87 body, which suits a street car that sees occasional track days. The 67in version reaches further across the rear deck and suits a car that runs more aggressive front aero.
How far does the angle adjust? The billet pedestals allow the angle of attack to be set anywhere from 0 to 15 degrees. A flatter setting keeps drag low for fast circuits, while a steeper one loads the rear tires for slower corners and heavy braking. Set both pedestals to the same position so the wing stays level.
How long does it take to ship? APR makes every GT-250 to order and quotes a lead time of one to two weeks before it ships, plus transit to the delivery address. Ask the Bulletproof Automotive team for a current estimate if the wing is needed for a specific event.

About APR Performance

APR Performance designs and builds carbon fiber aerodynamic components at its facility in Chino, California. Its wing families are developed with Computational Fluid Dynamics (CFD), and APR publishes the CFD data for its GTC and GT ranges so buyers can compare downforce and drag before choosing a setting. Parts are laid up in pre-preg carbon fiber, cured in an autoclave, finished in a UV-resistant clear coat and covered by a one-year warranty against defects in workmanship and materials.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.