Why is the DIGO III LIGHT CRUZ backrest height reduced by 3cm?

The 3cm reduction in total backrest height was specifically designed to allow the DIGO III LIGHT CRUZ to fit into a wider range of vehicles where taller bucket seats cannot be installed due to headroom or roof clearance constraints. This makes it a practical option for drivers who want a BRIDE comfort seat but have been limited by the height of standard models in their particular vehicle.

Can an armrest be added to the DIGO III LIGHT CRUZ?

Yes. The DIGO III LIGHT CRUZ is designed to accept a specialized BRIDE armrest, which is sold separately. The armrest reduces upper body strain during long drives by providing support for the arm and shoulder, making it a recommended addition for high-mileage drivers or anyone who spends extended time behind the wheel.

What is the high-tensile net used for in the backrest and seat surface?

The high-tensile net spans both the backrest and the seat surface to create an enveloping, wrap-around hold that conforms to the driver's body and distributes weight evenly across the contact area. This reduces pressure concentration at specific points and contributes to the seat's long-drive comfort by preventing the fatigue that builds up when a seat holds the driver rigidly rather than supporting them with a more flexible and adaptive surface.

What is the seat material and does it prevent slipping?

The DIGO III LIGHT CRUZ uses luxurious faux suede fabric throughout. In addition to its soft, premium texture, the material is slip-resistant, providing a moderate level of hold that keeps the driver positioned correctly without the tightness associated with performance-focused sports seat materials. It is suitable for both comfort builds and everyday use.

Is there any storage built into the DIGO III LIGHT CRUZ?

Yes. A utility pocket is built into the back of the backrest, providing a convenient in-cabin storage option for the driver or a practical storage surface for rear passengers. This is a practical detail that reflects the everyday usability focus of the DIGO III LIGHT CRUZ.

How does the DIGO III LIGHT CRUZ compare to the STREAMS CRUZ?

Both seats are comfort-focused reclining bucket designs from BRIDE intended for long-distance use. The STREAMS CRUZ is BRIDE's flagship comfort seat, engineered with a medical comfort approach to specifically address lumbar strain and muscle fatigue caused by road movement. The DIGO III LIGHT CRUZ is a slimmer, more installation-accessible model with a reduced backrest height and a high-tensile net construction, focused on broad vehicle compatibility, ease of entry and exit, and practical features like the armrest option and utility pocket. Drivers with tighter headroom or installation constraints will find the DIGO III LIGHT CRUZ the more practical choice, while those prioritizing the highest level of ergonomic lumbar support should consider the STREAMS CRUZ.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

BRIDE DIGO III LIGHT CRUZ Reclining Bucket Seat

The BRIDE DIGO III LIGHT CRUZ is a slim reclining comfort seat designed for long drives with practical installation in mind. With a total backrest height reduced by 3cm compared to standard models, it fits into a wider range of vehicles where taller bucket seats cannot be accommodated, making it one of the more installation-friendly options in the BRIDE comfort seat lineup. Comfort and ease of use are at the center of the DIGO III LIGHT CRUZ’s design. The knee support has been lowered to make boarding and exiting easier, which reduces the physical effort required every time the driver gets in or out of the vehicle. A high-tensile net is used across both the backrest and seat surface, creating an enveloping, wrap-around hold that distributes the driver’s weight evenly rather than concentrating it at pressure points. The polyurethane material on the seat surface has been updated to provide a softer ride over extended periods, and a utility pocket on the back of the backrest adds a practical storage option within the cabin.

More Compact & Comfort New Model DIGO III LIGHT

The DIGO Ⅲ model has a simple yet stylish design, eliminating the need for belt holes in its backrest. The overall height of the back rest is also 3cm lower than that of its predecessor – DIGO II LIGHT– making it suitable to be installed on more models. Moreover, this product features an improved pocket at the rear part which adds practicality and makes it perfect as sports seats for commercial vehicles such as small cars, trucks and vans.

High Hold Ability and High Quality Sitting Comfort Achieved By A High-Tensile Net

The DIGO II LIGHT and DIGO III LIGHT provide riders with a secure, comfortable ride due to the high–tensile net on the seat surface and backrest. This design helps reduce fatigue over extended journeys by providing excellent holdability that conforms to one‘s body.

Angle Can Be Adjusted With A Single Touch

User–Friendly Super Recliner
Both the DIGO II LIGHT and DIGO III LIGHT come with a super recliner that makes it simple to change the angle of their backrests. You can fold them forward in one easy touch, while a quick lever provides you with smooth position adjustment for finding your perfect seat setting.

Abundant Color Variation With 4 Colors

The plethora of colors available in the DIGO series make it possible to find a perfect match for any type of car
You can also choose a model that is equipped with seat heater for each variation

The Total Height of The Back Rest Reduced By 3cm

It can be fitted to the majority of cars
A slim, reclining chair upholstered with sumptuous suede fabric
This DIGO III LIGHT CRUZ model is an ideal choice for those who are looking to make long drives more comfortable. It comes with a lowered knee support that makes it easier to get in and out of the vehicle, as well as a high–tensile net on its backrest and seat surface which gives you extra comfort when seated. Furthermore, they have also changed the polyurethane material used in this product‘s seat surface so that it provides even softer riding experience than before. Plus there is additional utility pocket at the rear part of its backrest too!
This chair is upholstered with a soft and stylish faux–suede fabric. Not only does it offer pleasant tactile qualities, but also has the advantage of being slip–resistant, making for an ideal seat material that provides just enough grip.

It Has Been Threaded To Enable Easy Installation of The Arm Rest

The DIGO III LIGHT CRUZ has been designed to allow for a specialized armrest to be connected on either side of the back support. The installation process is straightforward, thanks to the main shaft which comes with it; when not in use, you can simply cover up its screw part by putting caps over them. (Please note that this product does not come with an arm rest – these must be purchased separately.)

Seat Heater Installation Models Can Also Be Selected

The DIGO III LIGHT CRUZ models can be equipped with heated seats, which are built–in heaters on the back and seat. Unlike air conditioning that utilizes engine warmth, these seat warmers will rapidly become hot even in chilly winter weather. By using it together with an AC unit, your body is warmed from its core more quickly than just relying on the air conditioner alone; additionally there‘s less moisture build up inside of a vehicle. Installation into car cigar sockets (12V cars only) is easy for two temperature control levels to maintain comfortability – perfect for open top vehicles!

Seat Rail Compatibility

Notes

The seat heater unit cannot be purchased separately or installed after the initial purchase
It is not possible to use more than one seat heater simultaneously

Frequently Asked Questions

Why is the DIGO III LIGHT CRUZ backrest height reduced by 3cm? The 3cm reduction in total backrest height was specifically designed to allow the DIGO III LIGHT CRUZ to fit into a wider range of vehicles where taller bucket seats cannot be installed due to headroom or roof clearance constraints. This makes it a practical option for drivers who want a BRIDE comfort seat but have been limited by the height of standard models in their particular vehicle.
Can an armrest be added to the DIGO III LIGHT CRUZ? Yes. The DIGO III LIGHT CRUZ is designed to accept a specialized BRIDE armrest, which is sold separately. The armrest reduces upper body strain during long drives by providing support for the arm and shoulder, making it a recommended addition for high-mileage drivers or anyone who spends extended time behind the wheel.
What is the high-tensile net used for in the backrest and seat surface? The high-tensile net spans both the backrest and the seat surface to create an enveloping, wrap-around hold that conforms to the driver’s body and distributes weight evenly across the contact area. This reduces pressure concentration at specific points and contributes to the seat’s long-drive comfort by preventing the fatigue that builds up when a seat holds the driver rigidly rather than supporting them with a more flexible and adaptive surface.
What is the seat material and does it prevent slipping? The DIGO III LIGHT CRUZ uses luxurious faux suede fabric throughout. In addition to its soft, premium texture, the material is slip-resistant, providing a moderate level of hold that keeps the driver positioned correctly without the tightness associated with performance-focused sports seat materials. It is suitable for both comfort builds and everyday use.
Is there any storage built into the DIGO III LIGHT CRUZ? Yes. A utility pocket is built into the back of the backrest, providing a convenient in-cabin storage option for the driver or a practical storage surface for rear passengers. This is a practical detail that reflects the everyday usability focus of the DIGO III LIGHT CRUZ.
How does the DIGO III LIGHT CRUZ compare to the STREAMS CRUZ? Both seats are comfort-focused reclining bucket designs from BRIDE intended for long-distance use. The STREAMS CRUZ is BRIDE’s flagship comfort seat, engineered with a medical comfort approach to specifically address lumbar strain and muscle fatigue caused by road movement. The DIGO III LIGHT CRUZ is a slimmer, more installation-accessible model with a reduced backrest height and a high-tensile net construction, focused on broad vehicle compatibility, ease of entry and exit, and practical features like the armrest option and utility pocket. Drivers with tighter headroom or installation constraints will find the DIGO III LIGHT CRUZ the more practical choice, while those prioritizing the highest level of ergonomic lumbar support should consider the STREAMS CRUZ.

About BRIDE

BRIDE is a Japan-based manufacturer specializing in seats and rail components designed to sit closest to the driver, offering maximum protection in a collision. Their ASEA-accredited products meet full vehicle inspection standards and pass six rigorous safety tests covering seat back impact, head restraint performance, seat and belt mounting, and flame resistance. BRIDE is also the first Japanese company to receive FIA endorsement for its seats, with nine models approved for international competition. Every seat is built by hand in Japan using precision-engineered shells and technical fabrics, with all components sourced domestically to keep quality tightly controlled from start to finish. For BRIDE, “Made in Japan” reflects a long-held standard built on ingenuity, meticulous craftsmanship, and technical knowledge; qualities that make their seats a trusted choice in the demanding environment of motorsport.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

BRIDE DIGO III LIGHT CRUZ Reclining Bucket Seat

Guaranteed Safe Checkout

BRIDE DIGO III LIGHT CRUZ Reclining Bucket Seat

More Compact & Comfort New Model DIGO III LIGHT

High Hold Ability and High Quality Sitting Comfort Achieved By A High-Tensile Net

Angle Can Be Adjusted With A Single Touch

Abundant Color Variation With 4 Colors

The Total Height of The Back Rest Reduced By 3cm

It Has Been Threaded To Enable Easy Installation of The Arm Rest

Seat Heater Installation Models Can Also Be Selected

Seat Rail Compatibility

Notes

Frequently Asked Questions

About BRIDE

Reviews