Does the Eventuri F8X intake fit my car?

The Eventuri F8X intake fits the S55-powered BMW F80 M3, F82 M4, and F83 M4. It is engineered specifically for the S55 engine, so verify your car has the S55 before ordering. The system installs in place of the factory intake using laser-cut stainless steel brackets and BMW-spec hardware.

How does the Eventuri F8X intake improve performance?

The Eventuri F8X intake builds one smooth, uninterrupted inlet track from the carbon front scoops through the sealed ducts and venturi housings to the turbo inlets. Cold air saturation and reduced restriction let the twin turbos work more efficiently, which supports improved throttle response and engine performance, particularly under sustained load.

Which filters does it use, and do they need replacing?

The Eventuri F8X intake runs two high-flow Generation 2 filters. Replacements are Eventuri part EVE-151-G2-FTR, the Type S carbon intake replacement filter, and two are required per service. Cleaning or replacing the filters periodically keeps the sealed system flowing at its best.

How is the intake different from the V2 sealed duct kit?

The Eventuri F8X intake is the complete sealed V2 system, including housings, filters, ducts, scoops, and tubes. The separate V2 sealed duct kit is only the ducting, sold to convert an existing Eventuri V1 intake to sealed V2 spec. If you do not already own a V1 intake, this complete system is the one to buy.

Is the Eventuri F8X intake returnable?

No. The Eventuri F8X intake is not eligible for return, so confirm your S55 model and fitment before ordering. Eventuri provides warranty coverage and damage-in-transit support, and the system is designed and hand-assembled in the UK.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Eventuri Black Carbon V2 Intake System for F80 BMW M3, F82 M4, and F83 M4

The Eventuri F8X intake is a sealed prepreg carbon fiber V2 induction system engineered as the flagship airflow upgrade for the S55-powered F80 BMW M3, F82 M4, and F83 M4. Rather than a single component swap, it is a complete solution built around fully sealed carbon fiber venturi filter housings that hold intake air temperatures down while flowing freely across all driving conditions. Precision carbon ducts tie into the factory cold air channels to feed ambient air straight into the filters and keep hot engine bay air out, so the system stays thermally stable even sitting in traffic where open filters heat soak. Carbon front scoops, sealed ducts, sculpted intake tubes with integrated MAF mounts, aluminum entry cowls, and dual Generation 2 filters form one smooth, uninterrupted inlet track that lets the twin turbos work more efficiently for sharper throttle response. The weave is chosen to complement OEM M Performance carbon.

Features

The Eventuri F8X intake is a complete sealed system with fully sealed carbon fiber venturi filter housings for stable intake air temperatures
Carbon intake ducts integrate with the factory cold air channels to feed ambient air and block engine bay heat
Dual high-flow Generation 2 air filters
Carbon fiber intake tubes with integrated MAF sensor mounts
Aluminum airflow cowls for a smoother entry into the filters
Carbon fiber front scoops for increased cold air supply
Prepreg carbon construction with a weave designed to match OEM M Performance components
Laser-cut stainless steel brackets and silicone couplers with BMW-spec hose clamps

Specifications

Construction: Prepreg carbon fiber, OEM-matching weave
Housings: Sealed carbon fiber venturi filter housings
Filters: Dual high-flow Generation 2 filters (Type S)
Ducting: Carbon ducts tied to the factory cold air channels, with carbon front scoops
Intake tubes: Carbon fiber with integrated MAF sensor mounts
Hardware: Aluminum airflow cowls, laser-cut stainless steel brackets, silicone couplers, BMW-spec hose clamps

Applications

BMW M3: F80 | 2014-2018 | S55 3.0L twin-turbo I6
BMW M4: F82 | 2014-2020 | S55 3.0L twin-turbo I6
BMW M4 Convertible: F83 | 2014-2020 | S55 3.0L twin-turbo I6

Notes

Fits the S55 engine only; verify your car runs the S55 before ordering
Designed and hand-assembled in the UK; warranty coverage and damage-in-transit support are provided
Check local emissions regulations before installation; a manufacturer emissions compliance notice applies to this intake

Frequently Asked Questions

Does the Eventuri F8X intake fit my car? The Eventuri F8X intake fits the S55-powered BMW F80 M3, F82 M4, and F83 M4. It is engineered specifically for the S55 engine, so verify your car has the S55 before ordering. The system installs in place of the factory intake using laser-cut stainless steel brackets and BMW-spec hardware.
What makes the V2 intake a sealed system? The Eventuri F8X intake uses fully sealed carbon fiber venturi filter housings instead of open filters. Carbon ducts tie into the factory cold air channels to feed ambient air straight into the filters while blocking hot engine bay air. This keeps intake air temperatures low and stable, even in stationary traffic where open filters tend to heat soak.
How does the Eventuri F8X intake improve performance? The Eventuri F8X intake builds one smooth, uninterrupted inlet track from the carbon front scoops through the sealed ducts and venturi housings to the turbo inlets. Cold air saturation and reduced restriction let the twin turbos work more efficiently, which supports improved throttle response and engine performance, particularly under sustained load.
Which filters does it use, and do they need replacing? The Eventuri F8X intake runs two high-flow Generation 2 filters. Replacements are Eventuri part EVE-151-G2-FTR, the Type S carbon intake replacement filter, and two are required per service. Cleaning or replacing the filters periodically keeps the sealed system flowing at its best.
How is the intake different from the V2 sealed duct kit? The Eventuri F8X intake is the complete sealed V2 system, including housings, filters, ducts, scoops, and tubes. The separate V2 sealed duct kit is only the ducting, sold to convert an existing Eventuri V1 intake to sealed V2 spec. If you do not already own a V1 intake, this complete system is the one to buy.

About Eventuri

Eventuri was founded by a team of engineers and enthusiasts with backgrounds in aeronautics and tuning, all sharing a passion for cars and performance. After owning various aftermarket intakes over the years and being disappointed with gains that seldom lived up to their claims, they decided to take things into their own hands and set a new benchmark in intake design and technology. The goal was to engineer systems that provide real, measurable gains and to publish genuine figures to back them up. Their systems are developed using cutting-edge design, testing, and prototyping methods. Each design undergoes CFD analysis and is validated at the prototype stage through volumetric airflow measurement, intake temperature testing, and extensive dynamometer testing. Eventuri publishes all development data to illustrate the full process from concept to finished product. Only the best materials are selected for every component, down to the choice of fasteners, to ensure the quality of the final product is second to none.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.