Does this Öhlins Road & Track kit fit all FD3S Mazda RX-7 variants across the full 1991-2002 production run?

Yes. The kit is compatible with all FD3S Mazda RX-7 variants from 1991 through 2002, covering all Type designations from Type I through Type VI.

Why do the front and rear use the same 110 N/mm spring rate?

The matched 110 N/mm front and rear spring rate is intentional. The FD3S has a near-ideal weight distribution, and Öhlins tuned the spring rates to preserve that natural balance rather than skew the setup front to rear. This keeps the car's handling character intact while adding the damping precision the platform is capable of.

What type of top mounts does this kit use?

Both the front and rear use aluminum ball joint top mounts, which are included with the kit. Unlike some applications that retain the original rubber top mounts, the ball joint design reduces compliance and sharpens steering and suspension response.

How does the DFV adjuster work on the FD3S kit?

Turning the gold knob clockwise engages race mode across all four damping zones simultaneously: low-speed compression, high-speed compression, low-speed rebound, and high-speed rebound. Reversing it returns the damper to road mode. No tools are required and no per-corner adjustments are needed.

Are the dampers rebuildable, and what warranty does Öhlins provide?

Yes. All Öhlins Road & Track dampers are fully rebuildable and can be revalved or serviced over time. The kit is backed by a two-year limited warranty worldwide, and all shocks are corrosion salt spray tested to ISO 9227 standards.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Öhlins DFV Road & Track Coilovers for FD3S Mazda RX-7

The Mazda RX-7 FD3S already had one of the most celebrated chassis setups of its era, but the factory suspension was never the ceiling of what the platform could do. The Öhlins Road & Track coilover kit for the FD3S builds directly on that foundation; adding patented DFV damping technology, 25 clicks of individual compression and rebound adjustment, and aluminum ball joint top mounts at both ends. Whether the car spends most of its time on canyon roads, autocross courses, or circuit track days, this kit gives the RX-7’s near-perfect weight distribution the suspension hardware it deserves, without giving up the ride quality needed to get there and back comfortably.

DFV Technology and Track Performance

Öhlins’ Dual Flow Valve (DFV) technology is what separates the Road & Track series from conventional coilovers. A single turn of the gold knob clockwise engages race mode across all four damping zones at once; low-speed compression, high-speed compression, low-speed rebound, and high-speed rebound. The DFV internals respond quickly to surface changes on track, keeping the front tires loaded through corners and maintaining consistent contact under hard braking. An internal needle bleed valve also compensates for changes in fluid viscosity as the damper heats up, so performance stays consistent lap after lap without any driver input.

Construction and Adjustment

Front and rear each use an aluminum monotube shock absorber with individual spring preload adjusters and separate damper length adjusters, paired with aluminum ball joint top mounts. The front offers approximately 10-40mm of lowering adjustment with a 110N/mm spring rate; the rear provides approximately 5-35mm of adjustment at the same 110N/mm rate. The matched spring rates front and rear reflect the RX-7’s balanced weight distribution and keep the car’s natural handling balance intact. Ride height is adjusted by rotating the lower flange on the threaded body, leaving the spring seat in its optimal position at any height setting.

Features

DFV technology (Dual Flow Valve)
1-way 25-click compression and rebound adjuster
Individual height adjustment
Rebuildable dampers for custom tuning
Corrosion salt spray tested (ISO 9227)
2-year warranty

Specifications

Front
- Aluminum monotube shock absorber
- Spring preload adjuster
- Separate damper length adjuster
- Approximately 10-40mm lowering adjustment range
- 110N/mm spring rate
- Aluminum ball joint top mounts

Rear
- Aluminum monotube shock absorber
- Spring preload adjuster
- Separate damper length adjuster
- Approximately 5-35mm lowering adjustment range
- 110N/mm spring rate
- Aluminum ball joint top mounts

Applications

Mazda RX-7: FD3S | 1991-2002

Notes

Image(s) may differ from actual product

Frequently Asked Questions

Does this Öhlins Road & Track kit fit all FD3S Mazda RX-7 variants across the full 1991-2002 production run? Yes. The kit is compatible with all FD3S Mazda RX-7 variants from 1991 through 2002, covering all Type designations from Type I through Type VI.
Why do the front and rear use the same 110N/mm spring rate? The matched 110N/mm front and rear spring rate is intentional. The FD3S has a near-ideal weight distribution, and Öhlins tuned the spring rates to preserve that natural balance rather than skew the setup front to rear. This keeps the car’s handling character intact while adding the damping precision the platform is capable of.
What type of top mounts does this kit use? Both the front and rear use aluminum ball joint top mounts, which are included with the kit. Unlike some applications that retain the original rubber top mounts, the ball joint design reduces compliance and sharpens steering and suspension response.
How does the DFV adjuster work on the FD3S kit? Turning the gold knob clockwise engages race mode across all four damping zones simultaneously; low-speed compression, high-speed compression, low-speed rebound, and high-speed rebound. Reversing it returns the damper to road mode. No tools are required and no per-corner adjustments are needed.
Are the dampers rebuildable, and what warranty does Öhlins provide? Yes. All Öhlins Road & Track dampers are fully rebuildable and can be revalved or serviced over time. The kit is backed by a two-year limited warranty worldwide, and all shocks are corrosion salt spray tested to (ISO 9227) standards.

About Ohlins

For nearly 50 years, Öhlins has been a cornerstone of the motorsport, motorcycle, and automotive industries, guided by a clear mission to deliver uncompromising quality in products, service, and support from the MotoGP circuit to grassroots racing events in over 50 distributing countries. Trusted by aftermarket customers, OEM partners, and professional racing teams, the company designs and manufactures advanced suspension systems that push the limits of precision, control, and reliability. Rooted in a rich motorsport heritage and driven by a passion for innovation, Öhlins extends beyond its racing DNA to inspire riders and drivers everywhere with high-performance solutions that are rigorously developed, tested, and refined to transform vehicle dynamics. Through close collaboration with leading manufacturers and racing teams, the company sets the benchmark for suspension performance, integrating insights directly into its shock absorbers, front forks, steering dampers, and advanced electronic suspension systems for both OEM and aftermarket applications. Its products deliver track-proven performance with minimal modification, enabling professional competitors, enthusiasts, and everyday drivers to achieve greater comfort, control, and confidence.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.